Question about Cars & Trucks

Open Question

How to change headlight globe - Cars & Trucks

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change a lamp in Toyota Corolla 2012?


The headlight globe usually just twists out of the back of the headlight assembly. When fitting the new globe,use a cloth or glove. Don't touch any part of the globe with bare hands as the oily film will cause the new globe to fail very quickly.

Dec 02, 2014 | 2012 Toyota Corolla L Sedan 1.8L 4-cyl....

1 Answer

How do i replace headlight globes on mr2 sw20?


Turn headlights to on. Then 2 clicks back to turns lighs off but keep headlights up/open.

Remove headlight shrouds, (Black plastics.) Use phillips + head screw driver.

Remove chrome trim ring using phillips head screw driver.

Pull out headlight bulb. Disconnect from harness.

Reverse to install.

Sep 12, 2014 | 1991 Toyota MR2

1 Answer

How do you replace a headlight globe?


There is a large rubber boot that covers the headlight globe . Pull it back, pinch the retainer spring and lift out the H4 globe.

Aug 15, 2014 | Cars & Trucks

1 Answer

Any problems changing 55 low beam/65 high beam to xenon 90 watt low beam/100 watt high beam


Check the size of the cables coming to your headlight. A higher lamp wattage would require more amperes for the wires to carry.

Mar 12, 2014 | Cars & Trucks

1 Answer

WHERE IS THE HEADLIGHT REPLACEMENT BULB LOCATED?


open the bonnet, locate a screw on top of the headlight and undo it, locate two screws between the centre grill and headlight and undo them and locate a screw right behind the headlight assembly and loosen it. Now the whole headlight should come out. It wont come all the way out. By unplugging the electrical plug you can take it out completely. Lift up the lock thats hold the rear headlight cover and that will expose the internals of the headlight and then you can change whatever globe you want. First disconnect the wiring plug from the globe and then release the clip holding the globe and replace the globe and make you sure you dont touch the glass part of the new globe which installing. Touching it will shorten the globes life and there is a chance that it might explode inside and create mess.

Nov 19, 2010 | 2000 Mercury Cougar

1 Answer

Lo beam headlight replacement passenger side


open the bonnet, locate a screw on top of the headlight and undo it, locate two screws between the centre grill and headlight and undo them and locate a screw right behind the headlight assembly and loosen it. Now the whole headlight should come out. It wont come all the way out. By unplugging the electrical plug you can take it out completely. Lift up the lock thats hold the rear headlight cover and that will expose the internals of the headlight and then you can change whatever globe you want. First disconnect the wiring plug from the globe and then release the clip holding the globe and replace the globe and make you sure you dont touch the glass part of the new globe which installing. Touching it will shorten the globes life and there is a chance that it might explode inside and create mess. You need to buy H7 type globe for low beam.

Nov 10, 2010 | 2000 Mercury Cougar

1 Answer

Does anyone know how to change a bulb in the headlight of a mitsubishi evolution vii


open hood ,go to back of headlight,black plastic screw like circle in middle ,twist it and globe is held with a retaining pin you have to gently push the clips inward to release globe and do reverse to install

Oct 29, 2009 | Mitsubishi Lancer Evolution Cars & Trucks

2 Answers

How to change globe on headlight ford focus 2005


avatar3.jpg

brian_au no 1 solution is wrong.. globe is under a spring clip cover . remove cover, then unplug, then release retaining spring behind the globe. replacement is just process reversal

Sep 18, 2009 | 2005 Ford Focus

1 Answer

How can I replace or clean my headlight globe of a 1998 Galant


Headlight globe, meaning the inside of the headlight? If thats what you mean, only way to do it, is to take the lens off, and in order to do that, you need to take out the headlight, take off the rubber backings and take out the light bulbs. Then preheat your oven to 210 degrees, stick your light in there for 10 minutes, and pry apart the lens, since the glue will melt. Dont forget to undo the clips that also hold the lens to the housing. After you pry off the lens, clean or whatever you need to do. Then reseat the lens and hook the clips, then back in the oven it goes for 10 mins. Then hold pressure on the lens untill glue hardens.

Hope that helps.

They will not have or sell replacement globes, it will come with the whole headlight.

May 29, 2009 | 1998 Mitsubishi Galant

2 Answers

89 Pulsar Headlight


you need to replace it from the back, if its not accessable try removing afew things if not remove the entire headlight as it must be fitted from the back.

May 23, 2008 | 1989 Nissan Pulsar

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...