Question about Cars & Trucks

Open Question

Simplicity 12.5 HTG will transmission will not engage into forward or reverse.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ghost4548
  • 776 Answers

SOURCE: hyundai excel 1996 automatic will engage reverse

It appears you have a Forward Clutch FAILURE. Replace the trans after you get it diagnosed and verified by a professional technician. By the way, do you have a Check Engine light? If so, what is the diagnostic code? The dealership can scan the system and find any codes which may have been stored in the TCM (Transmission Control Module). If there were any 'Incorrect Gear Ratio" codes, it's most probably the trans itself.

Posted on May 28, 2009

Mustgo
  • 2359 Answers

SOURCE: 2005 F150 Crewcab, 4.6 V8, 94000 miles, 44A trans,

First,look for an fashion transmission shop that will do REAL transmission filter change,

DO NOT use the quick flush machine.

It will kill a good working transmission.

=================
1/2 hour before your appointment,add a can of Transfix (blue can) to free up the particles and lube the passage.

Drive gently, and pass though all gears when there is no traffic,.
=================

Ask the shop to blow out the trans line + cooler.

Use Amsoil ATF if you can handle the price,

Do rear diff lube.

Check + lube WORN OUT universals.........



Good luck.

Posted on Jul 15, 2009

  • 297 Answers

SOURCE: manual transmission reverse will not engage

trans bands are streched may be fixed

Posted on Jul 15, 2009

SOURCE: The transmission shifter is loose on my 1993 Ford

sounds like an obstrution in the linkage look at the lever on the trans also check the cable to see if it is freyed

Posted on Jan 06, 2010

duane_wong
  • 6826 Answers

SOURCE: My reverse transmission stop working

OK, I would first check the fluid level in the transmission to verify that it's full or topped off.

Usually transmission fluid and filter changes will not correct physical problems with the solenoid not going into reverse, and get rid of strange noises.

Changing the fluid is more like a preventative measure against malfunctions, but once damage is done it's probably permanent.

You probably are looking at a transmission rebuild in this case, unfortunately.

Posted on Aug 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford crown victoria 99 won't go forward goes in reverse


You have a 4r70w transmission and more than likely a forward drum failure has occurred, seeing as reverse still works fine and no forward engagement. This is not an electrical problem, it is a hard part failure and the transmission will need to be disassembled to repair it. Forward drum failures are one of the more common failures in these transmissions. 4r70w no forward gears only reverse help needed Ford Truck Enthusiasts...

Dec 01, 2015 | 1999 Ford Crown Victoria

1 Answer

96 ROVER DISC. Has strong reverse - won't engage any forward gears. Fluid seems full even when warm.


Make sure the 4wd shifter is in correct position and hasn't slipped out of correct spot to get you moving forward.

Mar 27, 2013 | 1995 Land Rover Discovery

3 Answers

2003 mercury sable transmission will not engage into forward or reverse


If you are sure the shifter is connected to the transmission, it could be a long list of things inside the transmission.

Dec 05, 2012 | 2003 Mercury Sable

1 Answer

I have 2005 Chevy Suburban; when you engage the gear in drive the truck would move but won't get out of the first gear. I've checked my transmission fluid and its ok. It also responds to reverse when you...


Common problem probably a 4L60E transmission The low and reverse clutches are the same ones The forward clutches are another set and then there are the 3-4 clutches in another pack. So you probably burn out the forward clutches or could be a stuck valve in the valve body. Time for a transmission specialist.

Feb 02, 2011 | Chevrolet Suburban Cars & Trucks

2 Answers

Could frozen e brakes cause car not to go forward, car moves easy in reverse


No. An emergency brake on the 86 camaro engages the pads against the rotor and the vehicle would not move either in reverse or forward. It sounds like you have a gear problem in the transmission that could be related to either solenoid or actual gear wear. Assuming the vehicle is being MOVED as you say while the engine is running.. thus providing the energy to move it.. Going in reverse has the solenoid engaged one way, drive the other way. Solenoid sounds damaged at this point. Unfortunately this probably will require a transmission rebuild.

Jun 06, 2010 | 1986 Chevrolet Camaro

1 Answer

The reverse gears are not working.if you put the reverse gears it will accelerate infront instead.what do i do?


It sounds like the reverse band broke. Typically with automatic transmission when you put the transmission in reverse a couple things happen. Usually, the forward clutch engages and the reverse band engages holding the reverse drum from turning, which causes the planetery gears to make the vehicle move backwards. If the band breaks there is nothing told hold that drum from turning and you have a forward gear. The bad news is the trany is going to have to come out to be repaired and usually the reverse drum is one of the first things to go into the trany, so it has to be completely disassembled. Take it to a transmission shop have them check it, hopefully it's something simpler.

Jan 24, 2010 | 2003 Toyota RAV4

1 Answer

1998 chevrolet 4x4 -reverse will not engage


Hello, this is caused by a bad sungear inside the transmission. the transmission will need to be removed and troned down to repair this problem

Jan 13, 2010 | 1999 Chevrolet C/K 2500

1 Answer

Transmission will not engage in drive. Will only engage in reverse.


your transmission forward clutch pack has failed, u are going to need an overhaul to correct this

Dec 31, 2009 | 1995 Nissan 240SX

1 Answer

Transmission will not engage forward or reverse


Was fluid and filter changed to fix this,?????????? or did it happen right after this was done??????????. you are not clear.

Sep 21, 2009 | 1991 Chevrolet Corvette

1 Answer

C 6 transmission


Forward drive in the C6 requires both the forward clutch AND the low/reverse, one-way clutch, or intermedaite band to engage. Since you have reverse but no forward, the forward clutch is most likely the problem, since it is needed only for forward speeds and does not affect reverse. Sounds like a trans rebuild.

Jul 14, 2008 | 1988 Ford F 250

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...