Question about Buick Cars & Trucks

Open Question

1989 Buick lasabre. Flashers and headlights work but not the turn signals, would that be a blown fuse?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

dennymulford
  • 1055 Answers

SOURCE: turn signals and brake lights flashers dont work

bad brake light switch!!

Posted on Aug 22, 2009

  • 2841 Answers

SOURCE: my turn signal flashers won't work. the bulbs are

The Flasher Relay is more than likely defective. Replace it. Turn signal flasher located Front seating area, driver side, under dash, mounted on passenger side of steering column. Curtorsey Auto Zone

Posted on Nov 29, 2009

Testimonial: "thank you this is very helpful. i might be able to fix it myself. being a women i really do appreciate. thanks again"

  • 1 Answer

SOURCE: turn signals and hazard don't work

On my 2005 Dodge Caravan the turn signals and wipers suddenly stopped working.

Posted on Jan 26, 2010

ZJLimited
  • 17970 Answers

SOURCE: turn signals do not work

This is one FLASHER fault; ?m referring to the blinker "flasher fuse", it is the bottom round fuse under the dash in the fuse block.

REPLACEMENTThe turn signal flasher and hazard units are usually located located under the dash either to the left or right of the steering column on most models.

  1. Remove the turn signal flasher unit or hazard unit by pulling them up from the electrical connection.
  2. To install, push the unit(s) into the electrical connector

Good luck (remember comment and rated this).

Posted on Apr 10, 2010

  • 564 Answers

SOURCE: Turning Signals not working

if 4way flashers work & no signal,,,i would replace signal flasher,,,there are two flashers ,,,,

Posted on Apr 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why wont the headlights and running lights work on my 2002 Buick LaSabre


Three possibilities. The fuses, the light switch, and the turn signal switch. Most likely the light switch, because the others have different fuses and run from different spots in the TS switch.

Mar 15, 2015 | 2002 Buick LeSabre

1 Answer

Turn signals


Do you know how to do automotive electrical testing ? How to use a DVOM - digital volt ohm meter ? You have high resistance in the circuit . Use voltage drop to find the problem .
Mastering Voltage Drop Testing with Pete Meier and Jerry Truglia

Apr 14, 2017 | 1998 Buick Century

1 Answer

2004 buick century has no turn signals but 4 way flashers work


Iw sounds like the fuse is blown......please rate this and good luck

Aug 14, 2012 | 2004 Buick Century

1 Answer

1992 BUICK LASABRE FLASHERS WORK' TURN SIGNAL DOES NOT ;WONT EVEN LIGHT BULB'' FUSE IS GOOD ANY SUGGESTIONS


the turn signal flasher may be bad, its up under the dash, on the left side attached to a bracket. the connector should be/might be red.

Dec 09, 2010 | 1992 Buick LeSabre

1 Answer

Turning Signals not working


if 4way flashers work & no signal,,,i would replace signal flasher,,,there are two flashers ,,,,

Apr 28, 2010 | 1989 Buick LeSabre

2 Answers

Turn signals and 4-way flashers do not work - 1997 Buick Century


Time to change the flasher unit, it's usually close to the drivers side of vehicle and behind a fuse box access panel and will have something like "12v 23/98W " on it. It's a largish cube shaped componant and may be water damaged !

Apr 10, 2010 | 1997 Buick Century

1 Answer

1989 honda turn signals and flashers dont work" Only the head lights work with the switch


It could be either a blown fuse (check your fuse box) or a failed flasher relay which is often mounted inside and under the dash board on the driver's side; it's a cylindrical aluminum can about 2" high and ~ 1 1/2" diameter.

Feb 15, 2010 | Honda Accord Cars & Trucks

1 Answer

How do you replace the left front turn signal light on the 2002 Buick LaSabre ? robertwolf7614@comcast.net


their should be two white clips on the headlight you pull the clips up and the headlight comes out including the turn signal part.you open the hood of car and look behind the haedlight for clips hope thise helps

Mar 20, 2009 | 2002 Buick LeSabre

1 Answer

1989 Lincoln Town Car Problem:


I would say that your problem would be in your headlight switch. Remove and test wire leading to tail lights.

Jun 21, 2008 | 1989 Lincoln Town Car

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...