Question about Cars & Trucks

Open Question

Need manual for CD Clock Radio Model 7-4801a

Trying to UNset my alarm, it goes off in the middle of the day and would like to stop it!

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 187 Answers

SOURCE: My radio/cd/clock stopped working. There doesn't

Check the fuse in the fuse box. Look on the fuse box door to see which fuse is for the radio. Some times its listed as ACC. Pull the fuse and look to see it is burned. If it is go to any auto supply store or even Walmart and get a replacement of the same amperage. The number will be clearly stamped on the fuse. If this one blows than it could be a problem beyond the fuse.

Posted on May 06, 2009

ghassun
  • 499 Answers

SOURCE: CD,AM, FM radio, How do I set the clock.....no

try to download the manual from herehttp://www.devicemanuals.com/guide/Automobile/GMC/GMC-Sierra-Owner's-Manual-2004-==TVRBNU5UUTQ=.html

Posted on Jun 07, 2009

  • 181 Answers

SOURCE: I have a 2004 Saturn. The radio, cd and clock

If it is a detachable face,make sure the face is on good. If not and you checked the fuses,then you need to check the wireing to the radio. FYI these late model cars have fuses under the hood as well as inside the car.

Posted on Mar 09, 2010

  • 8 Answers

SOURCE: do you have an instruction manual for a micromark mm 23062

No,I don,t have one,but untill you find one unplug the alarm horn,maybe in front of radiator,simple to do,or cut wire and use elect tape on ends so they won,t short out,Now buy a led blinking fake alarm,e-bay ? 8 bucks ?tape it up inside under dash,now start looking for the company that makes your alarm..

Posted on May 10, 2012

  • 39 Answers

SOURCE: Radio, CD player, Sync, clock stopped working on my 2008 Ford Explorer

Most likely a fuse. If your fuse box is labeled it will say radio under the fuse. If its not check your owners manual for location of fuse box and radio fuse.

Posted on Mar 04, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How doI set the clock


Setting the Time (Without Date Display) If your vehicle has an AM/FM base radio with a single CD player and preset buttons numbered one through six, the radio will have a clock button for setting the time. You can set the time by following these steps: 1. Press the clock button until the hour numbers begin flashing on the display. Press the clock button a second time and the minute numbers will begin flashing on the display. 2. While either the hour or the minute numbers are flashing, turn the tune knob, located on the upper right side of the radio, clockwise or counterclockwise to increase or decrease the time. Instead of using the tune knob, you can also press the SEEK, FWD (forward), or REV (reverse) buttons to adjust the time. 3. Press the clock button again until the clock display stops flashing to set the currently displayed time; otherwise, the flashing will stop after five seconds and the current time displayed will be automatically set. To change the time default setting from 12 hour to 24 hour, press the clock button and then the pushbutton located under the forward arrow label. Once the time 12H and 24H are displayed, press the pushbutton located under the desired option to select the default. Press the clock button again to apply the selected default, or let the screen time out. Setting the Time (With Date Display) If your vehicle has a radio with a single CD player or a CD with DVD player, the radio will have a clock button for setting the time and date. To set the time and date, follow these instructions: 1. Turn the radio on. 2. Press the clock button and the HR, MIN, MM, DD, YYYY (hour, minute, month, day, and year) will appear on the display. 220 3. Press the pushbutton located under any one of the labels that you want to change. Every time the pushbutton is pressed again, the time or the date if selected, will increase by one. • Another way to increase the time or date, is to press the right SEEK arrow or FWD (forward) button. • To decrease, press the left SEEK arrow or REV (reverse) button. You can also turn the tune knob, located on the upper right side of the radio, to adjust the selected setting. The date will not automatically display. The only way to see the date is by pressing the clock button when the radio is on. The date with display will time out after a few seconds and go back to the normal radio and time display. If your vehicle has a radio with a six-disc CD player, the radio will have a MENU button instead of the clock button to set the time and date. To set the time and date, follow these instructions: 1. Turn the radio on. 2. Press the MENU button. Once the clock option is displayed. 3. Press the pushbutton located under that label. The HR, MIN, MM, DD, YYYY will appear on the display. 4. Press the pushbutton located under any one of the labels that you want to change. Every time the pushbutton is pressed again, the time or the date if selected, will increase by one. • Another way to increase the time or date, is to press the right SEEK arrow or FWD (forward) button. • To decrease, press the left SEEK arrow or REV (reverse) button. You can also turn the tune knob, located on the upper right side of the radio, to adjust the selected setting. The date will not automatically display. The only way to see the date is by pressing the MENU button and then the clock button when the radio is on. The date with display will time out after a few seconds and go back to the normal radio and time display. 221 To change the time default setting from 12 hour to 24 hour or to change the date default setting from month/day/year to day/month/year, follow these instructions: 1. Press the clock button and then the pushbutton located under the forward arrow label. Once the time 12H and 24H, and the date MM/DD/YYYY (month, day, and year) and DD/MM/YYYY (day, month, and year) are displayed. 2. Press the pushbutton located under the desired option. 3. Press the clock or MENU button again to apply the selected default, or let the screen time out

Nov 10, 2016 | 2007 Pontiac Torrent

1 Answer

How to change Clock settings


One would probably need to know the MAKE ( IE Ford , Gm , Chrysler , Etc. ) ; MODEL , ( Focus , Impala , Caravan , Etc. ) ; model YEAR ; ( 2010n ) ; and POSSIBLY which radio the clock is in , ( Radio with 6 CD changer , Etc. ) .

If you have the owner's manuals , they would tell you how to change the clock . If not , go to the dealer , and ask if they will teach you for free .

Aug 20, 2014 | Cars & Trucks

1 Answer

2011 dodge 1500 hemi radio will not turn on


Think fuses first.t. If the cd is clicking try hitting eject first if there is a cd in the unit. if there is no cd in it try pitting one. If the changer is stuck it likely is in the middle of switching modes. I d on't know if this will help but trying the obvious things sometimes works.

Feb 18, 2014 | Dodge Cars & Trucks

1 Answer

Radio, CD player, Sync, clock stopped working on my 2008 Ford Explorer


Most likely a fuse. If your fuse box is labeled it will say radio under the fuse. If its not check your owners manual for location of fuse box and radio fuse.

Mar 04, 2013 | Cars & Trucks

1 Answer

How do you change the clock on a 2009 Chevy cobalt.


Setting the Clock Without Date Display AM/FM Base Radio with a Single CD Player
To set the time:
  1. Turn the ignition key to ACC/ACCESSORY or ON/RUN. Press to turn the radio on.
  2. Press until the hour begins flashing on the display. Press a second time and the minute begins flashing on the display.
  3. While either the hour or the minute numbers are flashing, turn to increase or decrease the time.
  4. Press again until the clock display stops flashing to set the currently displayed time; otherwise, the flashing stops after five seconds and the current time displayed is automatically set.
To change the time default setting from 12 hour to 24 hour, press the button until 12H or 24H is displayed. Once 12H or 24H is displayed, turn the knob to the desired option to select the setting. Press the button again to apply the setting, or let the screen time out.
With Date Display Radio with CD (MP3) and USB Port, and Radio with Single CD (MP3) Player
To set the time and date:
  1. Turn the ignition key to ACC/ACCESSORY or ON/RUN. Press to turn the radio on.
  2. Press and the HR, MIN, MM, DD, YYYY (hour, minute, month, day, and year) displays.
  3. Press the softkey located below any one of the tabs that you want to change.
  4. To increase the time or date do one of the following: • Press the softkey located below the selected tab. • Press SEEK, or FWD. • Turn clockwise.
  5. To decrease the time or date do one of the following: • Press SEEK or REV. • Turn counterclockwise.
The date does not automatically display. To see the date press while the radio is on. The date with display times out after a few seconds and goes back to the normal radio and time display.
To change the time default setting from 12 hour to 24 hour or to change the date default setting from month/day/year to day/month/year:
  1. Press and then the softkey located below the forward arrow label. Once the time 12H and 24H, and the date MM/DD/YYYY (month, day, and year) and DD/MM/YYYY (day, month, and year) displays.
  2. Press the softkey located below the desired option.
  3. Press again to apply the selected default, or let the screen time out.

Nov 21, 2010 | 2009 Chevrolet Cobalt

1 Answer

How do I reset the clock on a 2008 Impala, and 2008 Accord? I can't find the manuals


For the Impala:

AM/FM Base Radio with a Single CD Player
This type of radio has a H (clock) button for setting the
time. You can set the time by following these steps:
1. Press the H button until the hour begins flashing on
display. Press this button a second time and the
minutes begin flashing on display.
2. While either the hour or the minutes are flashing,
turn the f (tune) knob, located on the upper right
side of the radio, clockwise or counterclockwise
to increase or decrease the time. Instead of using
the tune knob, you can also press the SEEK arrows,
\FWD (forward), orsREV (reverse) buttons
to adjust the time.
3. Press the H button again until the clock display
stops flashing to set the currently displayed time;
otherwise, the flashing stops after five seconds and
the current time displayed is automatically set.
To change the time default setting from 12 hour
to 24 hour, press the H button and then the
pushbutton located under the forward arrow label.
Once the times 12H and 24H are displayed, press the
pushbutton located under the desired option to
select the default. Press the H button again to apply
the selected default, or let the screen time out.
With Date Display
Single CD (MP3) Player
This type of radio has a H (clock) button for setting the
time and date.
To set the time and date, follow these instructions:
1. Turn the radio on.
2. Press theHbutton and the HR, MIN, MM, DD,
YYYY (hour, minute, month, day, and year) displays.
3. Press the pushbutton located under any one of the
labels that you want to change. Every time the
pushbutton is pressed again, the time or the date if
selected, increases by one.
• Another way to increase the time or date, is to
press the right SEEK arrow or\FWD button.
• To decrease, press the left SEEK arrow or
sREV button. You can also turn the f (tune)
knob, located on the upper right side of the radio,
to adjust the selected setting.

The date does not automatically display. To see the
date press the H (clock) button while the radio is
on. The date with display times out after a few seconds
and goes back to the normal radio and time display.

Mar 15, 2010 | 2008 Chevrolet Impala

1 Answer

I have a 2004 Saturn. The radio, cd and clock display just stopped working one day. Checked the fuses. How do I fix this?


If it is a detachable face,make sure the face is on good. If not and you checked the fuses,then you need to check the wireing to the radio. FYI these late model cars have fuses under the hood as well as inside the car.

Mar 09, 2010 | 2004 Saturn ION

1 Answer

My radio/cd/clock stopped working. There doesn't


Check the fuse in the fuse box. Look on the fuse box door to see which fuse is for the radio. Some times its listed as ACC. Pull the fuse and look to see it is burned. If it is go to any auto supply store or even Walmart and get a replacement of the same amperage. The number will be clearly stamped on the fuse. If this one blows than it could be a problem beyond the fuse.

May 06, 2009 | 2006 Honda Odyssey

4 Answers

Car alarm going off randomly in very cold weather


you need to turn the sensitivity down check your owners manual or call your toyota dealer for instructions many toyotas have this problem in cold temp's.hope this is helpful

Jan 17, 2009 | 2007 Toyota Camry

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...