Question about 2000 Volvo S40

Open Question

2000 Volvo s40 no turn signals or hazards switched relay and hazard switch and nothing turn signals work when hazard switch is pressed in but no hazards

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 275 Answers

SOURCE: turn signals dont work

check the flasher and the fuse

Posted on Nov 19, 2008

  • 72 Answers

SOURCE: turn signals and hazards dont turn on

The turn signals run through the hazard switch, I have replaced hazard switches for this problem.

Posted on Apr 23, 2009

  • 5660 Answers

SOURCE: no brake/hazard lights,have running/turn signal lights

Suggest you change hazard flasher 'can' first, then go to the hazard switch. I'm betting it's the flasher can.

Posted on May 11, 2009

  • 12 Answers

SOURCE: how to change hazard relay switch

u take off face plate off radio all u have to do is un plug it

Posted on Jul 17, 2009

  • 1 Answer

SOURCE: turn signals hazards flasher don't work jeep


Posted on Apr 01, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do you locate and test flasher relay on a 2006 Chevy Equinox? Turn signals and hazards stopped working after changing audio system. Fuses test good. Thank you, Mike

Did you change any wiring , tap into any wiring ? There is no flasher relay on your vehicle . It controlled by the BCM !
Turn Signal/Hazard Lamps
The body control module (BCM) is responsible for controlling the turn signals and hazard lamps. When the turn signal switch is placed in either the left turn or right turn position, the BCM receives a signal from the turn signal switch. The BCM then sends an on-off voltage signal to either the left or right turn signals and their instrument panel cluster (IPC) indicator. When the hazard switch is pressed, the BCM receives a signal from the hazard switch. The BCM then will send an on-off voltage signal to all the turn signal lamps. All the turn signal lamps will flash including both IPC turn signal indicators.
Your best bet , take it to a qualified repair ! We on here have no clue what you did . On this newer vehicles ,if you know nothing about automotive electronics you really should take to a professional

Aug 10, 2017 | Cars & Trucks

1 Answer

My hazard lights on my 2000 volvo s40 won't turn off please help pressed switch couple of times only turns off while you hold the button in

Sounds like a sticky/bad switch. You can try rapidly pressing the hazard button numerous times to see if switch will release. Usually it will. If not, you can pull the fuse for the hazards (location and identification in owners manual)

May 23, 2015 | 2000 Volvo S40

1 Answer

How to replace a 2002 Volvo S40 turn signal switch?

Purchase a Haynes manual for your model car (they are cheap) which will clearly give you a step by step procedure in replacing your turn signal switch and more importantly, will highlight the possible hazards and precautions necessary to do the job safely.

Jan 05, 2013 | 2002 Volvo S40

2 Answers

After using turn signal you can still hear clinking, is hazard relay part of turn signal

The hazard switch is also the device that supplies the turn signal "flash". If you continue to hear the noise of the turn signal flashing when the turn signals off than the problem is the turn signal switch. It is grounding The purple wire from the hazard switch which makes the hazard switch think the turn signal is on. The fix for this is to relace the turn signal/multi-function switch. Typically they will start to go bad in stages. Your symptom is the first stage. Eventually either the turn signals or the brake lights will also sto working. Let me know if you have any questions and I'll do my best to answer them. Thank you for using!

Feb 10, 2012 | 2000 Oldsmobile Alero

1 Answer

We have an S40 2000, 1.6 gasoline. Have a problem with turning lights. No one of them are working, in fact, the hazard lights are ok! Please help!

This is an EASY EASY FIX....... But you are not going to believe me but when you do what I say, you will find it will fix it......

Replace the working (DEFECTIVE) Hazard switch. and here is the reason why....

The Turn signals work through the Hazard switch, the switch acts as a RELAY / OVER RIDE. The hazard works as an Override so if the Blinkers are operating correctly and then you activate the Hazards, the blinkers no longer work and the Hazards have a Higher Priority and they work. If the Turn Signal part of the Switch is not working, the hazards still can work.

How do I know this? Happened to my 2000 S40 also...

Enjoy and have a great day

May 19, 2011 | 2000 Volvo S40

1 Answer

My hazard lights won't come on at all. The turn signals work fine, as long as the hazard button is not depressed. The hazards used to work, but if the hazard button was pressed and I put on a turn signal,...

sounds like a dirty switch, happens a lot in the UK as the switch is checked for the safety every year so the dirt in the switch causes open circuits, it is a complicated switch, it has many contacts that do different things when in and out, try a salvage yard

May 03, 2011 | 2001 Kia Rio

1 Answer

How to turn the heat on inside the car on a 2000 s40 vovlo?

should be a switch on the dash under the hazard light switch move it up to hot if this duz not work the wire at the back may of come off you will need to put it back on

Dec 20, 2010 | 2000 Volvo S40

1 Answer

Is the turn signals and the hazard lights on the same relay on a 2000 chevy malibu. the turn signals go off and come back on.and Ican not find relay for them and the clicking noise is coming form the...

The fix is to replace the hazard light switch. that there was a recall on the hazard light switch on my 00. call dealership and give them the vin number of car. if car is on list they will fix it.

Nov 28, 2010 | 2000 Chevrolet Malibu

1 Answer

Turn signals

you may check to see if your hazard light switch is disconnected or loose; if the hazard switch is not plugged in, both your hazards and turn signals will not operate

Oct 06, 2009 | 2000 Toyota Celica

2 Answers

Turn Signal keeps clicking

either the lines are grounded or the lever on your steering wheel is stacking up

Feb 26, 2009 | 2000 GMC Yukon XL

Not finding what you are looking for?
2000 Volvo S40 Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts


Level 3 Expert

77932 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides