Question about Nissan Cars & Trucks

Open Question

Hi there my dashboard lights are dead and my Left front park light and rear light tail light is also dead already replaced the balp where is the fuse box for nissan np200 1.6 8v

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Dashboard and tail lights out on 97" Nissan Sentra

I took my pathfinder to U-HAUL and asked them to check the towing lights. There was a pinched wire by my tail light and they cut it and changed it out for me, it was $5. I am so glad that I didnt take it to Nissan. My second step was going to be getting a new dimmer switch..but the guy who worked on my car said that wouldnt be the problem. He also told me that replacing a fuse that kept blowing out was dangerous and after the first time to get it checked out. Learn something new every day!!

Posted on Sep 12, 2008

reichweinj
  • 71 Answers

SOURCE: 2006 Chevy Trailblazer Tail Lights

There was a recall on this, take to the dealer and they will replace the whole socket on this.

Posted on Nov 10, 2008

MrScary66613
  • 1990 Answers

SOURCE: Left rear brake light stopped working but bulb and fuses are OK.

These are Dual Function Bulbs. They control the Parking Lights and the Brake Lights. This Bulb is Burnt out on the Brake Coil inside the Bulb. I have actually seen Bulbs that were Bad But you could not Tell by jast looking at them. It should be fine with a New Bulb. Please Rate My Response! Thanks!

Posted on Feb 05, 2009

jpstuhr
  • 49 Answers

SOURCE: I dont know where the fuse box #23 ( dashboard lights/tail light)

Should be #9?

Panel is left of your steering wheel

6620dee.jpg 3cddd1f.jpg

Posted on Feb 11, 2009

SOURCE: Tail lights don't work on 1998 Chevy Silverado.

check the wiring from the tailights back to the fuse panel, it sounds like an open connection. if i recall correctly check under the dash on the drivers side near the fuse panel for a bunch of wires in a bundle and look carefully for a wire or two that are cut/shorted/or seperated, you can also check under the drivers side kick panel by the hood release.

Posted on Feb 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the fuse located for the tail light on a 2007 jeep command


commander, is a grand with diffr, rear seats, bla bla.
the book is free, for the WK posted 300 times.
click free here, then click WK.
http://jeepdied.com/books.html

THE BETTER question is HOW do they work?? IT'S NO 1993.
they are park lamps, tails is old skool name, ok no prob.
parks are front /rear and sides
so all parks dead. be key fact, even the dash dimmer uses the parks (first click of the HL switch is PARKING LAMPS)
I might add that we have answered this maybe 3 times here.
already. ill do it one more time.
in the same book chapter 8w covers this, called exterior lighting or lamps.
it is digital controlled.
the TIPM underhood does this.
the TIPM hears the network commands for parks.
and closes its PARK relay
this relay then runs all park line feeds. front and rear
the license plate is a park lamp. too.
the 3 fuse are 8,9,10 in the TIPM under hood. clearly marked park.
if you look there the lids has all then names , marked.
that does rear.
8w-51-4 covers rear.
same fuse 8 left 10 right.
if 10 blows the cab switch bank goes dead for illumination.
but you never said how many are dead.
if all are dead and the relay is ok
the programming is bad or
you forgot to see DTC errors scanned.
if all lamps are dead, it must be scanned, or replace relay
2005 up'

Jan 19, 2017 | Jeep Commander Cars & Trucks

2 Answers

Where is fuse located for tail lights on 2002 Jeep Grand Cherokee


the operators guide tells you were all fuses are
did you lose that?
no engine size stated, only 2002, and no country stated..
these cars run different engines in all countries, so...???
and have wiring to match them. gas and diesel.
so tail. not brakes, no reverse but park lamps are out in the REAR Left and right and park is NOT dead
on the sides, nor on the front, park is the 1st click of the head lamps switch and park lamps even feed many interiour lamps.
even the speedo cluster back lamps are park.(with dim)
Ive answered vast park fails here, even showed you the free manual. and now repeat that once again..

answsing for USA car
and is a WJ jeep, the book is WJ.
answering for, only REAL parks dead, x4. (2 license plate lamp glow to, do they fail too?)
fuse 6 runs the park relay,
when you turn the switch the switch (digital it is) tells the BCM bain, (body puter) to turn on the park relay, the relay closes
and passes, fuse 6 power to the rear of the car
so we check fuse 6 first. then scan car make sure the car
has no COMMUNICATIONS FAILURES or related.
fuse 6 is located in the JB, (means cab box)

it also runs the front lamps and all side makers.
so just how many parks are dead, seems your post is not clear at all, there are like 20 total lamps + on this feed.
now my wild and useless blind answer.
fuse blown F6 and all parks dead front rear side.
no?
then relay park is bad.
no?
then scan PCM, it tells you related errors now.
post them.



b1df8676-b010-4a1f-b9bf-6d00e559cc8f.jpg

Aug 18, 2016 | Jeep Cars & Trucks

1 Answer

FUSE BOX LOCATIONS


1 at USA drives left toe. (bingo)
it has 2, both are show in the operators guide, lost that>?
get one, not be stranded of silly things?
all answer usa
parks dead in rear of car and front parks
and all dash parks dead too? Dash is called dimmable illumintation
but is park. non the less,
so only th tails are dead?

$4 to read it here. or DL.
https://suzukipitstopplus.com/Category/3-suzuki-service-manuals.aspx

front cab box is in cab.
engine bay box PDC is in same.

the fsm shows fuse 10 , clearly marked, TAIL
did you look yet, or just want us to do that for you?>

when you turn on parks
fuse 10 feeds power to HL relay 1, and it closes with HL switch on , park , or full on.HL
this relay runs all parks, Front, rear and side, lights.





25565550-2df4230r34ctk1cd2f5ytmtv-4-0.jpg

Mar 13, 2015 | 1999 Suzuki Vitara

1 Answer

My 2006 grand vitara tail lights are out I checked the fuses and there good I did notice that my license plate light went out first and than my tail lights could that possibly be the problem?


USA car, non export is my answer and no trailer mods.
Not RENEGADE
no Canada DRL options, right?
are the FRONT PARKS OUT TOO????? my shoe drops.!

so putting in 1 new bulb not fix 1? easy huh>?
did you scan the PCM for errors, DTC errors>
this year has digital controls for that.
the tail lights are really parking lights and are on all 4 corners not just tail. so are they all dead.? and the cab illumination in cluster
in PARK dead?

the BCM puter, closes the park relay on your command(digital)
this feeds 2 fuses rear, 7 an 9 (for both ends of car !!!)
9right
7 left rear and license.
so if 7 and 9 are good then the relay is not closing or bad.?

so in a shop we check fuse 7 and 9 , live, with voltmeter
12vdc both sides, parks ON,
if not 12v the relay is bad or not ON.
so we scan to PCM to see if the BCM sees errors
like "lost park output"
or see CANbus comm errors.
causing the loss of the park command to BCM

BCM means body puter.

not complex but BCM most close the relay !!!
12volts across that coil, or there will be no parks.

25453770-z53v0bh0zacy3ra2sk1gfmgn-2-0.jpg BTW the word tail only works on 1920 fords, had only 1 tail light
the parking light run about 20 lamps all over car. and in front of car.
the front lamp marked tail would be ODD.
but I know what you mean.

Feb 20, 2015 | 2006 Suzuki Grand Vitara

1 Answer

Tail an side light not working


bad parks (tail. and runnings , same deal)
there are 3 in rear
2 tails in front (funny that...) and 4 on sides of most cars.
and 20 more inside called DIM lights. are they dead too?

if all 25 odd lamps are dead the fuse is blown.
or bad park relay. or bad park switch.
start at the 10cent fuse and work up to $200 combo switch.
i uses , voltmeter. and dont guess. its easy , ask.

Jan 07, 2014 | 2007 Toyota Yaris

1 Answer

Break light not working on a 1998 plymouth grand voyager expresso


If you are saying the brake light and parking light on one side is dead, the problem would be in the socket or the ground connection.
There would be two different circuits involved. And the rear parking lights are powered by the same fuse as the front.
The brake lights are on one fuse too.

Feb 15, 2013 | 1998 Plymouth Grand Voyager

1 Answer

My dashboard and rear lights don't work


Assuming this has the V6, the 15A PARK LPS fuse in the underhood fuse block feeds constant power to the auto park lamp relay. When the relay closes, 12V power passes through the 10A INST LPS fuse in the right instrument panel fuse block to the panel dimmer switch and then to the five instrument cluster lamps.

If by "rear lights" you mean everything in the rear lamp assemblies, power for the tail lights (running lights) starts at the 15A PARKLAMP fuse in the underhood junction block, passes through the automatic lamp control (ALC) relay and the right instrument panel junction block to the tail filament of the dual stop/tail lamp and the separate tail lamp on each side. The 12 V power for the stop lamps is protected by the 20A STOPLAMPS fuse in the left I/P junction block, passes through the stoplamp switch when brakes are applied, stop filament of the dual stop/tail lamps. That leaves the turn signals and the hazard lamps. Power for the turn signals originates at the 10A TURNLAMPS fuse in the left I/P junction block and is applied to the hazard switch. Switch output goes to the turn/headlamp/wiper switch for selection of left or right turn signals. That switch output goes to the turn lamp. Power for the hazard function begins at the 10A HAZRD LPS fuse in the left I/P junction box and goes to the hazard switch. Switch output is sent to the left I/P junction box to make the turn signals flash. That's it. Post a comment if you need more information.

Sep 15, 2012 | 2002 Oldsmobile Alero

1 Answer

2001 Monte Carlo SS 3.8 v6 Rear park lights are out as well as the dash lights, brake lights work headlights work front running and park lights work, all turn signal lights work. replaced headlight switch...


Park, Tail, Marker Lamps, and License
The park, tail and marker lamps, including the license lamps, turn on when the headlamp switch is placed in either the PARK or the HEAD position, or anytime the headlamps are requested. The RT I/P #1 fuse in the RH I/P fuse block supplies battery positive voltage to both the park lamp relay switch contacts and to the park lamp relay coil circuit. The park lamp relay coil is controlled by the body control module (BCM). When the headlamp switch is placed in the PARK position, the BCM energizes the park lamp relay coil control circuit.
Current flows from the park lamp relay switch to both front and rear park lamp fuses and to their respective park/tail lamps. The front park lamps are grounded at G101. The rear park lamps are grounded at G302. The license plate lamps are a part of the rear park lamp circuit and are grounded at G302. The inadvertent power control feature prevents the park lamps from remaining on more than 10 minutes if left on. If the park lamps are turned on after the ignition switch has been turned OFF, or is in the ACCY position, they will remain on until turned off or until the battery runs dead.

Did you the REAR PARK LP fuse 15 amp in the right insturment panel fuse box.

Jul 18, 2017 | 2001 Chevrolet Monte Carlo

3 Answers

The only lights that work on my rear taillights are my turnsignals. I've replaced the bulbs and still nothing. Please help?


Check for power to your brakelight switch this located at the top of the brake pedal. I see alot of these go bad.

Aug 31, 2010 | 1999 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...