Question about Cadillac Cars & Trucks
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
you need to take glove box out. It's right behind three three 7mm bolts for the plastic piece that holds it in. two 10 mm nuts that hold it to the plastic piece. Should come right out with a little finessed force.
Posted on Nov 18, 2008
and the other blue one is for remote antenna..
Posted on Dec 04, 2008
The turn signal flasher is located under the dash to the right of the
steering column on most models. The hazard flasher is under the dash,
to the left of the steering column. On 1980 and later models, both the
turn signal flasher and the hazard flasher are located at the lower
left hand and the upper right hand corners of the fuse block
respectively. There is an inline fuse for the underhood/spotlamp
circuit. The fuse box is marked to indicate fuse size and the
Fig. 1: Common fuse color coding
Fuse panel with mini-fuses-1980 and newer full size Cadillac shown
Hope helped with this (remember rated this help) Good luck.
Posted on Nov 10, 2009
i have a 1989 cadillac deville 2 door front wheel drive i just changed the fuel filter in it and i pour fuel injection cleaner in the gas tank. when i pour gas in the carberator it gives a little start to the car and it started the car but it wont stay on. i just bought a new battery for it but i havent tried it out yet just because the positive wire going to the battery was bad so i cut the wire and gonna put a new wire for it do you have any suggestions what is wrong with it. it has been sitting for a couple years.......and it does start it just turns over......
Posted on Jul 31, 2010
Hello, The fuel pump is inside the gas tank. Remove the exhaust, Disconnect and remove all hoses and lines, also disconnect all electrical wires, remove 4 bolts from straps holding tank. Drop tank down. Remove lines and hoses from top of fuel pump module, remove lock ring, pull fuel pump module, turn unit as necessary so you don't destroy the fuel level sender. Hope this helps
Posted on Sep 04, 2010
Testimonial: "Job was completed in about two hours. Did not have to remove exhaust. Thank you. Also remember to buy new strainer on pump to keep warranty valid."
Tips for a great answer:
Dec 08, 2016 | Cadillac Cars & Trucks
Jul 30, 2014 | 1989 Cadillac Sedan DeVille
Feb 23, 2011 | 1989 Cadillac Sedan DeVille
Dec 16, 2010 | 1989 Cadillac Sedan DeVille
Oct 16, 2010 | 1989 Cadillac Sedan DeVille
Dec 30, 2009 | 1989 Cadillac Sedan DeVille
Nov 10, 2009 | 1989 Cadillac Sedan DeVille
Jul 07, 2009 | 1989 Cadillac Sedan DeVille
Oct 10, 2008 | 1989 Cadillac Sedan DeVille
Jul 09, 2008 | 1989 Cadillac Sedan DeVille
16 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: