Question about 1991 Toyota Camry

1 Answer

Need to replace the 1995 toyota corolla ignition lock cylinder

No-tilt steering wheel

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

You need to pull the plastic covers from above and below the steering wheel off. Then put your key in the ignition and turn it to the acc position, then there is a small button either on the top or bottom of the tumbler assembly, it will be inset and you will need a small pointy screwdriver or something to reach it. When you push the button the ignition assembly and the key will come out together

Posted on Jul 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replacement ignition key 1999 pontiac bonneille


Just the key or the whole lock cylinder with key ?

Removal Procedure
Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.
Disconnect the battery negative cable.
Disable the SIR system. Refer to Disabling the SIR System
Position the steering wheel half way between the upper and lower tilt stops (if necessary).
Remove the steering wheel. Refer to Steering Wheel Replacement .
Roll back the shift lever seal from the upper and the lower shrouds.
Remove the tilt wheel lever (if necessary). Refer to Tilt Lever Replacement - On Vehicle .
Remove the 2 TORX® screws from the lower steering column shroud.
Remove the lower steering column shroud.
Remove the 2 TORX® screws from the upper steering column shroud.
Lift the upper steering column shroud to gain access to the lock cylinder access hole.
Using a bent tip awl, insert the tip into the ignition lock cylinder access hole.
Turn the ignition lock cylinder to the START position.
Using the bent tip awl, push down on the ignition lock cylinder retaining pin.
Release the ignition lock cylinder to the RUN position.

Remove the ignition lock cylinder from the lock module assembly by pulling the ignition lock cylinder away from the steering column.

There may be a video on youtube .

Feb 23, 2017 | Pontiac Cars & Trucks

1 Answer

I am trying to remove ignition cylinder. I have pressed release button on the back, but the cylinder will only come halfway out.


TO REMOVE IGNITION SWITCH LOCK CYLINDER ASSEMBLY (w/o Smart Key System)
(a) T urn the ignition switch lock cylinder assembly to the
ACC position.
(b) Insert a screwdriver into the hole of the steering column upper with switch bracket assembly. Pull the ignition switch lock cylinder assembly until its claw contacts the stopper of the steering column upper with switch bracket assembly.
(c ) Insert a screwdriver into the hole of the steering column
upper with switch bracket assembly. Tilt the screwdriver
to disengage the claw of the ignition switch lock cylinder assembly, and pull out the ignition switch lock cylinder assembly.



25656969-ts5vql1j3jwqenesgxdwpnsg-5-0.png Thank you for visiting Fixya.

Apr 20, 2015 | 2010 Toyota Corolla

1 Answer

1995 Toyota Corolla ignition stuck


try to turn steering wheel as your turn the key sound like you may have put the switch in a bind

Nov 18, 2013 | 1995 Toyota Corolla

1 Answer

2010 corolla key stuck in ignition


It can be faulty ignition lock cylinder.I suggest to wiggle the steering wheel a bit and see if the key gets released out.If that is not helping then first turn steering wheel to right and try removing the key,or next turn steering wheel to left and see if you can remove the key.
----------
Spray wd-40 in the ignition key hole and let it remain there for few minutes,after that once again try to remove the key and see if that helps.
---------
But if that is not helping then ignition lock cylinder has to be removed out and key has to be manually removed.
-----------
For more troubleshooting on these types of issues,i suggest you to refer the help links mentioned below.Its the accurate solutions mentioned in it.that will help you to narrow the problem:-----
Click the link below:------

-----------

1999 Toyota Camry: Key Will Not Come Out Of Ignition?

http://whatisbyme.blogspot.in/2012/05/1999-toyota-camry-key-will-not-come-out.html
---------------

2001 Toyota Tacoma: Ignition Locked?

http://technoanswers.blogspot.in/2012/04/2001-toyota-tacoma-ignition-locked.html
------------

Ignition Switch Will Not Turn Off?

http://schematicsdiagram.blogspot.in/2012/04/ignition-switch-will-not-turn-off.html
-----------

Car will not turn the ignition to start?

http://technoanswers.blogspot.com/2012/01/car-will-not-turn-ignition-to-start.html


-----------

Ignition Key OFF but engine still running?

http://howtobyme.blogspot.in/2012/03/ignition-key-off-but-engine-still.html
--------------

Chevrolet Malibu: Key Stuck in ON position?

http://technoanswers.blogspot.in/2012/04/chevrolet-malibukey-stuck-in-on.html

2012 Dodge Ram: Ignition Key will not release?

http://whoisbyme.blogspot.in/2012/07/2012-dodge-ram-ignition-key-will-not.html-----------

Ignition locked up on Mercury Villager?

http://technoanswers.blogspot.in/2012/01/ignition-locked-up-on-mercury-villager.html-------------

Key won't turn in the ignition on Toyota land cruiser?

http://technoanswers.blogspot.in/2012/02/key-wont-turn-in-ignition-on-toyota.html

-------------------

How to remove ignition switch on VW Car models?
http://schematicsdiagram.blogspot.com/2011/12/how-to-remove-ignition-switch-on-vw-car.html
-------------

How to Replace Ignition Switch on Chevrolet Caprice Classic?

http://schematicsdiagram.blogspot.com/2011/12/how-to-replace-ignition-switch-on.html

-----------------

1995 Ford Taurus: Ignition switch not turning OFF?

http://repairhelpcenter.blogspot.in/2012/06/1995-ford-taurus-ignition-switch-not.html
-------------

Ignition Problem Troubleshooting

http://whoisbyme.blogspot.in/2012/07/ignition-problem-troubleshooting.html
------------------These will help.Thanks.

Nov 28, 2012 | 2010 Toyota Corolla

1 Answer

The ignition on a 1990 Toyota Corolla is locked, as well as steering wheel and gear shift. What can I do to unlock the ignition? The key will not turn, the steering wheel will not move and the gear shift...


try turning the steering wheel a bit. it may be the steering has the steering lock in a bind.
if that dont work wiggle key sideways and in and out a little then have lock cyl replaced

Mar 27, 2010 | 1990 Toyota Corolla

1 Answer

Steering wheel stays locked with ignition on 95 toyota corolla


broken sector gear or rack behind the key lock cylinder is at fault

Feb 04, 2010 | 1995 Toyota Corolla

1 Answer

The ignition key is stuck in my 2001 Toyota Corolla


The ignition on Toyota cars sometimes requires you to push the key down into the keyhole while turning it towards the 'LOCK' position.

If you have trouble moving it to this position, you can try turning the steering wheel at the same time, or jiggling the wheel left and right.

In case you are still unable to remove the key, you may have a defective ignition key cylinder, and this may need replacement.

Hope this helps.

Jun 27, 2009 | 2001 Toyota Corolla

2 Answers

How do you rplace an ignition lock cylinder on a 98 toyota corolla


You can do this one yourself if you want it does not require removing the steering wheel. just the plastic housing from the steering column.
remove housing/cover. then look at housing with cylinder lock assem. on bottom about 1.2 inches or so from the end of the lock assembly you will see a very small hole insert metal pin into hole and push in while turning the key in the ignition backwards to accessory positionyou will feel the pin your pushing move in a bit, then you should be able to pull the cylinder assembly out. insert new assembly with key in the same position and turn forward this will install your new assemlby then reassemble your plastic column covers.

May 25, 2009 | 1998 Toyota Corolla

1 Answer

Need to change ignition lock cylinders


Fig. 7 Steering column & ignition switch assembly. Exc. 1984 Corolla 41767877

  1. Disconnect battery ground cable.
  2. Remove steering wheel, if necessary, steering column garnish, if equipped, upper and lower covers, Fig. 7. On Starlet models, remove upper cover.
  3. Disconnect electrical connectors from ignition switch.
  4. Turn ignition key to ACC position and remove ignition key cylinder.
  5. Remove screw and ignition switch.
  6. Reverse procedure to install.

Mar 23, 2009 | 1986 Toyota Pickup 4WD

1 Answer

Ignition Key Won't Turn


This is a trickey one, you have to shake the steering wheel, Left & right sideways,While holding the key over. You may need help with this.

Feb 22, 2009 | 1998 Toyota Corolla

Not finding what you are looking for?
1991 Toyota Camry Logo

877 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...