Question about Suzuki Cars & Trucks

Open Question

Suzuki m13a 2001 model how to set timing mark on crank n sharp timing change mark

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 37 Answers

SOURCE: 1991 mazda b2200- timing belt changed

The keyway and or the dot on the crank should be line at 12 oclock. You will see a point on the oil pump housing to go by. On the camshaft the pointer will be at 12 oclock also. Use the O on the camshaft to the top at mark. Be sure to look at the dist. roter to make sure that it is pointing at the #1 spark plug wire. I could get 180 out of time. If you do it right it should start up right away. then you can use a timing light to finish it.
Good Luck jerry1938@hotmail.com

Posted on Dec 13, 2008

  • 14036 Answers

SOURCE: what kind of oil to put in the engine

most new car use 5w30 or 10w 30

Posted on Apr 10, 2009

  • 102 Answers

SOURCE: valve timing check

Chain drive. Unless the engine's been apart, why would the cam/valve timing change?
Valve clearances are another matter, and unless you want to remove the camshafts, get a mechanic who has the proper Suzuki tool to do them for you. You can measure the clearances, but the shims are between the cam lobe and the valve bucket, and the special tool holds the bucket down whilst changing to a thicker or thinner shim.

Posted on Sep 21, 2009

  • 1 Answer

SOURCE: 2001 hyundai accent 1.5l set timing mark on hb how

wiper motor is fine but it broke off at the ball and socket to the arm of the rod for the wipers

Posted on Mar 26, 2010

jturcotte
  • 7754 Answers

SOURCE: 2001 2.4l turbo timing marks see marks on cam

everything is at 12 o'clock. see diagram from autozone.com

1515ac4.gif

Posted on Sep 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Who makes the m13a engine


The Suzuki Motor Corporation makes all the M series engines for the Suzuki range.

Dec 28, 2015 | 2010 Suzuki Jimny 1.3

1 Answer

Suzuki swift 2011 not start code p1610


not start, so, car cranks, ok and will not start, , RIGHT?
That code is from a real scan tool???????
which engine is there, of the 5 or so?
1.2 L I4 (petrol)
1.3 L M13A I4 (petrol)
1.5 L M15A I4 (petrol)
1.6 L M16A I4 (petrol)
1.3 L I4 (diesel)
in what country is car, (1million posts here and not one ever said that)
and varies by guess what?, COUNTRY.

P1610 (is power train code =p)
i have no books on non USA cars. nor access to them
so not saying COUNTRY , forces me to guess engine and codes.
so i did what you failed to do , i searched on FIXya forum
and found this.
my best guess , would be... as per below. (no real FSM)
I see only 1 , a Reno. wrong car, but my online source shows no usa swift data at all. 2011
P1610 is a resulting DTC from the "LOCK MODE" condition which is set for various NATS malfunctions or an improper key being used. It prevents the car from starting (for some period of time, even if the key issue is rectified).To reset a NATS lock mode, a proper key must be cycled three times again to get the car to start
we only have 2001
here
https://suzukipitstopplus.com/Products/1173-2001-swift-service-manual.aspx

sorry

Oct 11, 2014 | Suzuki Swift Cars & Trucks

1 Answer

Where is cam sensor for 2001 suzuki swift 1.3 ?


2001., 1.3L
swift.

it real name is M13a
and knowing that you can google that.
here ill do that now.
if the scan tool is not saying is bad, its not. so>?????

my second post here for same exact question, try searching?


06076065-0369-4a72-a450-ae76767e77ad.jpg

Jul 07, 2014 | 2001 Suzuki Swift

1 Answer

Timing mark m13a


Suzuki Vitara

for the best solution of your problem visit this link

Jun 06, 2014 | Suzuki Vitara Cars & Trucks

1 Answer

Timing mark of suzuki engine m13a twincam fitted with timing chain


non stock? if not stock, say so , 1st thing.
post a question , you state only nouns.
all engines (gas) have 2 timings
1: spark
2: cam.
what is your question.?
my guess is you are not in uSA? state location.
used on swifts or jimny.
year?

chain marks. spark marks or crank pulley marks.
4th google hit. huge 1.3 PDF, id bet its there...
http://www.google.com/url?sa=t&rct=j&q=suzuki%20m13%20timing&source=web&cd=4&cad=rja&ved=0CDoQFjAD&url=http%3A%2F%2Fwww.vems.hu%2Ffiles%2FFero%2Fsuzuki%2520VVT%2F4.pdf&ei=pHIwUtf7AeHg2AWi_IHQBg&usg=AFQjCNGAIMvbaLlj5qu5g-_MnFOcSRDtaA


m13 is not easy find, information.... but google will find it if you just use it. I promise.
Alldata.com dont cover it.

Sep 05, 2013 | Suzuki Vitara Cars & Trucks

1 Answer

M13a timing marks


cam or distributor.?

Mar 10, 2013 | 2001 Suzuki Swift

2 Answers

Hi! What are the correct timing marks for a 1.8 suzuki esteem engine. I needed for change the timing chain. Thanks


if you take off the upper belt cover and line up the top dead center timing mark the cam mark will be right on or off 180 degrees. Line up the dot on the cam with the arrow by rotating the crankshaft around till both the cam mark and the crank TDC mark line up. Now when you take off the lower cover all the marks will line up for the crank. They are usually pretty obvious, but if your are not sure at this point you can always paint your own. Just make sure when you slide the new belt on , all the timing marks line up.

Dec 28, 2010 | 2001 Suzuki Esteem

1 Answer

Valve timing check


Chain drive. Unless the engine's been apart, why would the cam/valve timing change?
Valve clearances are another matter, and unless you want to remove the camshafts, get a mechanic who has the proper Suzuki tool to do them for you. You can measure the clearances, but the shims are between the cam lobe and the valve bucket, and the special tool holds the bucket down whilst changing to a thicker or thinner shim.

Apr 15, 2009 | Suzuki Aerio Cars & Trucks

1 Answer

What kind of oil to put in the engine


most new car use 5w30 or 10w 30

Apr 10, 2009 | 2006 Suzuki Swift

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...