Question about Toyota Tacoma

Open Question

Remove water pump fan 2003 tacoma - Tacoma Toyota Cars & Trucks

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: overheating toyota tacoma

if its losing water it could be a head gasket or cracked head.

Posted on Sep 01, 2008

  • 5 Answers

SOURCE: How do I remove the fan assembly from the water

You must loosen the large nut on back of the fan clutch, very possible this is left hand thread turnclockwise to loosen.

Posted on Mar 08, 2009

  • 20 Answers

SOURCE: How to remove a 2003 GMC Sierra 1500 water pump

first what you want to do is locate the water pump. then release then tension off the belt that it is connected to. there should be 2 or 3 bolts and undo them and pull it out. then replace with the new one.

Posted on Apr 29, 2009

  • 1305 Answers

SOURCE: Need to replace water pump. What's the easiest way

I would attempt to take the fan blade off the water pump, then remove the fan shroud off the radiator but leave the radiator in the car.. it may take a little more finesse but save you alot of time..

Posted on May 31, 2010

  • 1190 Answers

SOURCE: how do i remove the

Hello: Behind the fan and in front of the water pump there is a big nut, turn it counter-clockwise to loosen. (leave the belt on when removing) There is a special wrench for this, Auto Zone, Advance Auto etc) Sometimes you have to hit the wrench with a sharp blow to break it loose.

Posted on Jan 08, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I replace the bulb behind my fan speed switch for a 2003 Tacoma?

You must remove the dash control to access the bulb.

Feb 26, 2015 | 2003 Toyota Tacoma

1 Answer

Need fan clutch replaced

You can take off the 4 bolts that hold the fan on the water pump pulley carefully and you won't need to take off the pulley. You may be able to do that without removing the fan shroud, but it will add a difficulty factor if you don't. Take out the fan clutch with the fan blade still bolted on. Separate the fan blade from the clutch and install the fan blade on the new clutch unit and re install it on the engine .

Nov 10, 2013 | 1996 Toyota Tacoma

1 Answer

Changing the water pump on 2003 kia sedona

To change a water pump you need to remove the fan belt, than you can remove water pump's bolts and take it out, replace the gasket as well and put the new pump in place. It is located on the same side as the alternator on the right.

Oct 22, 2011 | 2003 Kia Sedona

1 Answer

How to remove fan clutch from water pump 2003 Chevy trailblaer. Cause I already removed the water pump alog with fan clutch!

since u removed the pump and fan assembly already place the pump carefully in a vice or some thing that will hold pump than use a strap wrench to hold the pulley and than unbolt the large nut it is a reverse thread so clockwise to loosen and counter clockwise to tighten

Jul 25, 2011 | 2003 Chevrolet TrailBlazer

1 Answer

How do you change your water pump, what needs to come off during this process


Dec 13, 2010 | 2003 Toyota Tacoma

1 Answer

I'm having trouble taking off my radiator om 1997 Toyota Tacoma. Do I need to take the grille off, or is there an easier way?

radiators are a pain mostly time consumeing take off the fan shroud and water pump fan that should give you enough room good luck

Dec 09, 2010 | 1997 Toyota Tacoma

1 Answer

2003 Toyota Tacoma PU. Blower fan on all the time wont turn off.

Switch is defective. Remove the switch from its connector and see if it stops. If it stops them switch is the problem. If it doesn't than you have a short inj the circuit.

Jun 11, 2010 | 2003 Toyota Tacoma

1 Answer

Need to replace water pump. What's the easiest way

I would attempt to take the fan blade off the water pump, then remove the fan shroud off the radiator but leave the radiator in the car.. it may take a little more finesse but save you alot of time..

May 31, 2010 | 2003 Dodge Durango

1 Answer

Water pump removal

yes , you need a special tool to remove fan clutch to shaft

Mar 01, 2009 | 2003 Hummer H2

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides