Question about Volkswagen Golf

Open Question

Hi im looking for torque settings for golf 4 1.6 mains and bigends

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 77939 Answers

SOURCE: head torque settings

The torque is 90 foot lbs, and they want you to use new bolts, the old ones are stretched and CAN NOT be reused, tighten 20 lbs at a time in proper sequence as outlined in service manual.

Posted on Dec 03, 2008

  • 2309 Answers

SOURCE: hi, im about to replace a head gasket on a 1997

manuals an specs and be had at an auto parts store or a dealership. have the head inspected at a machine shop for warpage or cracks, good idea to get new head bolts and timing belt, good luck

Posted on Apr 28, 2010

  • 365 Answers

SOURCE: im looking for torque settings for my 2002 jeep

try ringing an engine reconditioner, he should have those specs for you at no charge

Posted on Jun 14, 2010

  • 1796 Answers

SOURCE: mitsubishi canter truck 4d34 torque settings

Most manuals I found do not cover diesel engines. There is a Peter Russek manual for your truck which covers diesel engines. Click on the following link to check the manual
THIS ARE THE SPECS FOR A 04 MITSUBISHI LANCER. Identifying Fastener Tightening Specifications Table ITEMS SPECIFICATIONS Roll stopper bracket mounting bolt69 ± 10 N.m (51 ± 7 ft-lb) Shift cable bracket mounting bolt19 ± 3 N.m (14 ± 2 ft-lb) Select lever mounting bolt19 ± 3 N.m (14 ± 2 ft-lb) Speedometer gear mounting bolt4.0 ± 1.0 N.m (35 ± 9 in-lb) Backup light switch32 ± 2 N.m (24 ± 1 ft-lb) Interlock plate bolt30 ± 3 N.m (22 ± 2 ft-lb) Poppet spring32 ± 2 N.m (24 ± 1 ft-lb) Control housing mounting bolt19 ± 3 N.m (14 ± 2 ft-lb) Under cover mounting bolt7.0 ± 1.0 N.m (61 ± 9 in-lb) Reverse idler gear shaft mounting bolt48 ± 6 N.m (35 ± 4 ft-lb) Clutch housing-transaxle case mounting bolt44 ± 5 N.m (33 ± 4 ft-lb) Front bearing retainer mounting bolt19 ± 3 N.m (14 ± 2 ft-lb) Select lever mounting nut12 ± 1 N.m (104 ± 9 in-lb) Stopper bracket mounting bolt22.3 ± 0.3 N.m (16.1 ± 0.2 ft-lb) Clutch release bearing retainer mounting bolt9.8 ± 2 N.m (87 ± 17 in-lb) Differential drive gear mounting bolt132 ± 5 N.m (98 ± 4 ft-lb)

Posted on Sep 30, 2010

  • 1 Answer


Fiat uno mia 1100 toque settings

Posted on Jul 24, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Need torque settings for mains and bigends for Audi 500s 5 cyl 2,3lit

big ends 30nm or 22 ftlbs then tighten futher by 1/4 turn or 90degrees.
main brgs, 65nm or 48ftlbs.

Sep 13, 2017 | Audi Cars & Trucks

1 Answer

I need torque settings on 2.2 ford ranger tdci 2012 head bolts, mains and bigend bearings

hi lourens.
not sure if this link will help but have a look.
do not go into anything that has the word fixya next to it as it will only bring you back here.
torque settings on 2 2 ford ranger tdci 2012 head bolts mains and big end...

Jun 07, 2017 | Ford Cars & Trucks

1 Answer

Torque settings for main and bigend bearings

First you need to know the diameter of the bolts and the type of thread ie 3/8 N/C or 5/16 N/F then look at the type of bolt ie plain steel or high tensile SAE grade 3, 4, or 6, once you know this go to a general purpose bolt torque chart, and derive the torque spec info.
If the engine block is cast iron use the full torque specification.
If the engine block is alloy then reduce the torque spec 10%

Below is an example of a general purpose bolt / nut torque chart


May 03, 2016 | 2011 Ford Fiesta 1.4

1 Answer

Torque settings

depends on your engine. If it's a VW air cooled flat 4, the mains which also ties down the engine casings, is torqued to 35 ft lbs and the cyl heads to15 ft lbs.
On more modern engines the mains can be torqued to 65 ft lbs, the big ends to 45 ft lbs and the cyl head to anywhere between 30 to 45 ft lbs.
A common remark among mechanics is to turn them till they strip, then a quarter turn back. Don't follow this rule.

Nov 05, 2014 | Cars & Trucks

2 Answers

Engine torque settings mitsubishi 4d32

im looking for information by a 4d32 Mitsubishi , help!!!!!! thanks

Apr 03, 2012 | 1988 Mitsubishi Cargo

2 Answers

Flywheel bolts torque settings

Check with your local auto parts store. Or buy a repair manual

Jun 07, 2008 | 1999 Volkswagen Golf

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

77939 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8832 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides