Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You have an heated Oxygen sensor. 2 of the wires heat up the sensor and keep it at a certain temperature, it is turned on and off by the computer. The other 2 are use to send a very low voltage reading back to the computer to tell the computer if the engine is running rich or lean. I don't have a diagram to tell you which wire does what but you can get a manual and that should give you the information that you need and tell you how to trouble shoot it to tell if the sensor is bad or not, you may want to look for a wire laying on the exhaust, I have found wires burnt and lay on the metal.
Posted on Oct 31, 2008
SOURCE: rear running lights don't work
hi from uk have you checked the bulbs? as these bulbs have 2 elements in each bulb ie tail light and the other element is brake light you do not mention whether license plate light/s are working? as they are on same circuit as tail lights hope this helps? please keep us updated on what you discover or you req further assistance ? best wishes from uk
Posted on Nov 20, 2008
I had the same problem with now power to windows, mirrors and seat. The common soulution is the orange and or black wire in the boot have broken between the door and post.
Posted on Dec 07, 2008
SOURCE: Door open light switch problem
First check to see if voltage is actually going to the bulb at the "dome" light etc. when you open the door... Then check to see if you have proper ground at dome light.. If not check wiring harness to the switches at door usually located in the door jam area.... remove switcvh and inspect for missing wires that go to the dome light some times the dome light is connected to a switch on the dash check this first....basics always first, fuses and connections then fallow the wire as a last resort..
Posted on May 03, 2009
The headlight, brake and turn signal all run out of the turn signal switch. this is what causing you to loose those items. the door is a clip that has broken inside the door that goes to the handle, you will have to take the door panel off to find the rod that is hanging
Posted on Jun 14, 2010
Tips for a great answer:
Jan 30, 2016 | Kia Cars & Trucks
Aug 12, 2015 | GMC Cars & Trucks
May 18, 2014 | GMC Yukon Cars & Trucks
Jan 20, 2011 | 2000 Honda Odyssey
Jan 05, 2011 | Ford Explorer Cars & Trucks
Go sit in your truck and close all the doors. Light stays on right? Put your key in the ignition. Does the chime start going off when you put the key in? If so, door switch or the GEM thinks a door is open.
To find out which door... Leave the key in the ingntion. Turn to the on position. Even with doors closed, chime sounds once after a few seconds and door ajar light comes on and stays on right? Open each door one by one. The chime should sound each time you open a door. When you find the door that doesn't make the chime sound when you open it, that is the problem. (Don't forget to try the rear hatch and the hatch glass also!) To determine if the switch is bad or if the GEM is having a problem thinking the door is open, just unplug the suspected switch, close all the doors, and see if the problem stops. (don't forget to wait a second to give the lights time to go off) If unplugging the switch solves it, the replace it. If it doesn't, Ford can check your GEM to see if it is the problem.
I hope this helps
Dec 02, 2010 | Ford Explorer Cars & Trucks
Jun 03, 2010 | 1999 Chevrolet Blazer
Feb 09, 2010 | 2000 Toyota Tacoma PreRunner
Jun 18, 2009 | 2001 Dodge Caravan
Aug 20, 2008 | 2001 Isuzu Rodeo
12 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: