Question about Cars & Trucks

Open Question

Temperature is going up to 3/4 whist the vehicle is stationary , what could be the problem?

Did an engine overhaul , the head had been fixed & passed the pressure test , fixed a new oval set , new head bolts & serviced injectors

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: HELP MY OLDSMOBILE FAILED TEST ONLY SMOG

CHECK AND CLEAN I.A.C SENSIOR

Posted on Jun 12, 2008

Ad

SOURCE: bmw 318i

The car's engine is overheating !
Its not because you forgot to fit in the thermostat there could be other problem, like tht of the water pump, radiator clogged up, cooling fan.
You have to check them all.
Was there any problems before you pulle out tht cylinder head?

Posted on May 25, 2009

fingaz22
  • 1068 Answers

SOURCE: 2004 ford ranger edge has blinking check engine

have the crank sensor check for erratic operation. if you have done all of that then there is nothing else. and they way the computer knows it is misfiring (if it is) false code maybe and could be bad crank sensor. good luck

Posted on Oct 25, 2009

  • 3 Answers

SOURCE: 4M40 engine lacking power and blowing black smoke.

http://www.delicaclub.com/load.php?id=20

Install the egr mod, will stop it smoking in no time
Delica owner...

Posted on Dec 21, 2009

c1apton15
  • 3400 Answers

SOURCE: Check Engine Light is on... I

Have an OBII scan done. (fault scan) Autozone, Advance, etc.. do this for free and will give you list of fault(s) that triggered light. They'll also reset light for you - FREE

Posted on Mar 05, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The engine temperature is going up to 3/4 when the engine is running whilst stationary


First get a diagnostic test carried out to check that the temp guage is reading correctly temperature.
Ensure that when head was repaired the thetmostat housing, radiator and generally all the cooling system was flushed out prior to adding fresh coolant. I would always replace the thermostat too.. Obviously the cooling system must be fulky bled of any possible air locks and then it needs to be tested that the electric fan(if it has electric fan), comes on at the correct time.
If the car runs ok when driving but sits high at idle it may well be a partiall blocked radiator or even a water pump (although again i would have thought that would have been replaced too).
Roger

Apr 24, 2017 | Cars & Trucks

1 Answer

My 2003 Jaguar X Type only blows cold air when I'm driving and both regular temperature air whenever I stop at a stop sign and then when I start again the air gets cold again what's the problem


this problem indicates that the gas in the system is going into high pressure in the compressor head from no cooling action from the fan ( engine or condensor fan--most likelycondensor fan) when the vehicle is stationary
when travelling the air is passing through the condenser and so the ac system operates as normal as like the engine temp comes down when travelling after standing
have an accredited ac specialist shop check out the problem as it may be simply a fuse for the fan or a seized fan

Jul 09, 2015 | Jaguar Cars & Trucks

1 Answer

Engine vibration at 2100 rpm and 3100 rpm (over 80 mph)


If the engine is vibrating it will be felt when the revolutions are raised when the vehicle is stationary.

Few engines vibrate in these modern times in the way lots of engines used to do because automatic machinery during production balances to quite a high degree without being subject to the sort of distractions humans suffer.
It is during repair work later that most vibrations begin when someone makes a mistake and fits an odd clutch bolt or even an odd washer that is lighter or heavier than the others or if the engine has had overhaul work and mismatched parts have been fitted or the balance shaft, if it has one, has been mistimed.

If the vibration is not detectable while the vehicle is stationary it is probably originating from elsewhere.

Mar 27, 2015 | 2001 Mitsubishi Montero Sport 4WD

1 Answer

How do I go about removing a 1992 Toyota engine from the vehicle so I can overhaul or rebuild ?


First I would pull plugs if its missing ,it seems like only running on 3 cylinders ,you'll find spark plug all loaded up and fouled clean or replace with new.If vehical uses excessive oil peticularly on freeway, possibly just head needs valve guide seals.

Sep 26, 2014 | 1992 Toyota Tercel

1 Answer

Audi fans stay on all the time


What do you mean all the time? when engine is running?
if you are on a hot climate the fans help dissipate excessive heat build up when the vehicle is stationary. what is the water temperature tell you when you are not moving?
could be that the thermostat is not 100% functional to fully open after engine heated properly and the computer attempts to remove excessive heat to prevent overheating of the engine or the engine temperature sensor is giving false readings that tell the computer that the fans need to be on to do the above.
i recommend that you do a scan of the engine, first to check for errors history, then if none are found while driving and afterwards stationary to see what the temperature reads are.

after engine shutdown usually they can still remain on up to a minute to eliminate excess heat from the radiator.

let me know if it helped.

cheers,
Florian

Jul 01, 2014 | 2004 Audi A4

1 Answer

Heated oxygen sensor heater control circuit low , also see below


the code is for coolant leak large. Check coolant level and top off.
check the oil for moisture.
pull the plugs to see if any are steam cleaned.
either one could indicate a bad head gasket or worse damaged head.
Check to see if any new hoses have been added. tighten clamps if needed.
look on engine block for any puddles where coolant could be leaking.
pressure test coolant system and check for leaks.
If you can smell coolant inside the vehicle check the heater core.
lastly have an emissions test run with the radiator cap off and at running temperature. Start vehicle with cap off to avoid spray of hot coolant. This tests head gasket and cyl head for leaks.

Mar 11, 2013 | Cars & Trucks

1 Answer

I bought a 2005 dodger durango and it overheated when the temps hit 100 degrees. I changed the thermo-stat and flushed radiator and that worked until I tow anything (small boat or horse trailer).


first check whether your temp gauge is correctly calibrated. if yes then check the radiator for any blocks in the chamber or fins. if no then check for any blocks in the water jacket of the engine block. if your engine is newly overhauled then it may show an increase in temp till the working parts become free. to make the parts free keep the engine started and the vehicle stationary while changing the water in the radiator continuously till your required temperature is attained.

Jun 29, 2011 | 2005 Dodge Durango

2 Answers

Engine over heated stalled out and will not start


FIRST OF ALL CHECK ENGINE COOLANT LEVEL IF LOW YOU NEED ADD MORE COOLANT CHECK FOR LEAKING TOP AND BOTTOM RADIATOR HOSES, CHECK RADIATOR FOR LEAKS. IF YOU DID NOT LOSE MUCH COOLANT THERMOSTAT COULD BE STUCK CLOSED.WHEN ADD COOLANT CRANK VECHICLE AGAIN CHECK BOTH RADIATOR HOSES THEY BOTH SHOULD BE HOT. IF TOP RADIATOR HOSE GOING TO ENGINE BLOCK COLD AND BOTTOM RADIATOR HOSE COLD WARM THE THERMOSTAT IS STUCK CLOSED. IF ENGINE OVERHEATING WHILE SITTING IN LONG TRAFFIC LINE YOU COULD HAVE FAULTY ENGINE COOLANT TEMPERATURE SENSOR.IT CONTROLS COOLANT FAN AT SET TEMPERATURE.IF COOLANTS FAN NOT RUNNING WHEN OVERHEATING.EITHER COOLANT FAN FUSE RELAY FAULTY OR FAN MOTOR DEFECTIVE OR FAN MOTOR WIRING CONNECTOR HAVE BROKE WIRES.IF COOLANT FAN IS RUNNING WHILE ENGINE OVERHEATING CHECK CRANK OIL AT OIL DIP STICK OIL LOOKS LIKE MILK SHAKE YOU HAVE BLOWED HEAD GASKET. WARNING DONT KEEP DRIVING VECHICLE WHEN ENGINE OVERHEATING YOU WILL CAUSE ENGINE AND TRANSMISSION DAMAGE.

Jun 19, 2011 | 2002 Kia Sedona

2 Answers

Need a motor diagram torch settings and overhaul


Hi,if you go to autozone.com and sign up for my zone(it's free).Thay have a on line free repair manual,it has everything needed to rebuild the top end of his engine and more.Hope this helps you.If it does please rate it. Thank You for using fixya.....iluv2fish.......Ray.....

Jun 24, 2010 | 2002 Chevrolet Malibu

1 Answer

Overheating problem


When you had sent the cylinder head to the machine shop did they pressure test it?
If it had hair line crack there sure would be water lose in the radiator and also it would probabely too mix it wth engine oil.
Please recheck the valve clearance if they are tight you do sometimes get the over heating issues.
Check the thermostates operating temperature...at what degrees must it open, try replace it with a lower temperature i mean the one to open earlier say if you have one which opens at 89 degrees C change it to a say one which opens at 79/80 degrees.
Hope this helps!

May 24, 2009 | 1998 Toyota Camry

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...