Hi.I Need to change a startmotor to Fiat Freemont. How can I do it? Is it going to be changed from up or down? What is need to take away, before you can do the job? How can I reach to the bolts?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Number 1 tip, when changing batteries, always maintain power to the ECM and other modules using a couple of pieces of wire to the old battery, a battery charger, battery maintainer, or a special gadget that connected a 9 volt PP3 battery to the power outlet socket.
The Uno dash has two small Allen bolts on the sides of the gauges. Unscrew them, and gently pull the instrument cluster forward and out of the dash. The speedo cable has a plastic clip that holds the cable to the speedometer. The clip unclips from the speedo with a gentle pull away from it.
Feb 22, 2010
The FIAT Forumhttps://www.fiatforum.com > FIAT Cars > Uno
Nov 27, 2021 - Fortunately the drive gear-sleeve is held into the differential housing by a small Allen-head bolt and is easy to change. If you undo this bolt (on the side of ...
Great car i saw it on top gear lol. To change a tire, you will need a car jack, lug wrench, and a spare tire. Just put the lug wrench on the bolts and spin away. Make sure that you undo the bolts in a "x" pattern.
hi patricia
FIAT engine light flashing means the ECU needs adaptation,
you can do it yourself just follow this procedure.
( remember not to accelerate unles is stated) start the engine
let it to warm and wait for the cooling fan to come ON then OFF 3 times, like ON,OFF,ON,OFF,ON,OFF. After the fan cuts off the third time accelerate fully down let the engine rev up to 4000 only then leave the accelerator let the engine goes down back to idle, do this 3 times.the engine light should go away.
good luck
×