Question about Toyota Cars & Trucks
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The front seatblet retractor springs have weakened. Unfortunatly, there are no "user serviceable parts" on them. They would have to be replaced. How many miles is on it? If you have low mileage, the Toyota Customer Experience Center may provide you some assistance, as the belt replacements are quite expensive. I'd call the CEC and explain your dilemma. Here is the number: 1-800-331-4331
Posted on Sep 23, 2008
The 3.3 no longer has a "spin-on" filter. The filter is now a "cartridge-type", and is housed in a cricular aluminum housing under the engine.
Posted on Jan 02, 2009
on the front hinges ther are two spring clips use long nose pliers to remove and slide out pin.put on cover and REPLACE pins/clips.(spring clips look like washers)
Posted on Feb 24, 2010
SOURCE: Have 1999 Toyota Solara SLE
the part is located on top of the egr valve and has a electrical plug going to it........i would replace yhe egr valve assembly that has the sensor and the valve all in one due to age of the car and the mileage in case the egr valve is sticking and is holding the sensor open or is not letting it close all the way.......i hope this info will help you and if i can be in any further help let me know......let me and fixya know if i was ant help to you and a thumbs up would be greatly appreciated..........thanks and have a good day........
Posted on Jun 22, 2011
Tips for a great answer:
Aug 17, 2017 | Toyota Cars & Trucks
Feb 05, 2017 | 2007 Toyota Solara
Feb 15, 2014 | Toyota Cars & Trucks
Jul 04, 2013 | Cars & Trucks
Sit in back seat passenger side. Remove panel which is on top which is below rear window, same panel where seat belt goes into panel at top. You will need to remove #2 Phillips screws which hold panel in place. Screws are hiding behind seat belt front cover where belt goes down in panel, under cup holder which allows arm rest cover to lift off and one more right on left side of head rest in corner. Remove panel. You will see switch which is in vertical position. If for any reason you want to by-pass switch, just unplug switch. Radio will still work in standard mode. The amp sound will not increase in performance when top is down and sound will not be as sharp.
Jan 20, 2013 | 2005 Toyota Camry Solara
Jun 20, 2011 | 2004 Toyota Solara
Removal & Installation
Fig. Removal and installation of the turn signal switch
Dec 27, 2010 | 2001 Toyota Camry Solara
Mar 01, 2010 | 2002 Toyota Camry Solara
Feb 11, 2010 | 2000 Toyota Camry Solara
Feb 11, 2009 | 2005 Toyota Camry Solara
17 people viewed this question
Usually answered in minutes!