Question about Kia Cars & Trucks

Open Question

Repair a 2011 kia forte drivers rear quarter panel where shifted between the metal and the plastic bumper and can not line up the clips to hold. What is the easiest way to fix this problem?

The quarter is pushed a little towards trunk.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 99 Answers

SOURCE: Remove rear plastic bumper cover

please email me at meanness628@aim.com with any other info or questions if you have already gone to a body shop

Posted on Sep 29, 2008

Ad
  • 1 Answer

SOURCE: SOLUTION: HOW TO REPLACE REAR BULBS ON 2002 & 2004 BUICK LESABRE

Rear tail lamps for the 2002 La Sabre has eight nuts that hold the cover in place ( one piece-all acroos the back of the car). Do not remove the nuts for the lock, the cover sits in place and is not secured to the lock. Use a 10 mm deep well socket. remove the nuts and lift the cover to replace the burned out bulb(s). The bulbs are #194 or #198 (very small bulbs), not the 3057. It is easy to locate the burned out bulbs by putting the car in reverse and shutting off the engine and then put the ignition key in the accessory mode. The lights will light unless they are burned out. Simply pull them out and replace with the new ones and put the cover back in place and secure the nuts.

Posted on Feb 23, 2009

Rebgagnon
  • 382 Answers

SOURCE: Need to replace a headlight assembly for a 2006 Subaru Outback.

No, you just remove the radiator grill and the side marker light and the headlight housing bolts and it comes out. Not a real hard job and is Real straight forward. Good luck and have a good day.

Posted on Mar 29, 2009

csmock132
  • 4669 Answers

SOURCE: jeep grand cherokee,i want to remove the rear axles

The axles are bolted in. Rear drum brakes or disc? Remove the four nuts behind the brake and pull the axle.

Posted on Apr 01, 2010

  • 4369 Answers

SOURCE: 1997 mercury grand Marquis driverside rear window

usually this means you need a new window regulator.

Section 01-11: Glass, Frames and Mechanisms 1997 Crown Victoria, Grand Marquis Workshop Manual
REMOVAL AND INSTALLATION Window Regulator, Power Front Door
Removal

  1. If front door window glass (21410) is in the down position and is inoperable, the following steps must be taken; if front door window glass is operational, go to Step 2.
    1. Remove front door trim panel (23942) and front door trim shield (237A04). Refer to Section 01-05 .
    2. Disconnect battery ground cable (14301). Refer to Section 14-01 .
    3. Disconnect window regulator electric drive harness connector.
    4. sva~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Be careful not to strike or scratch front door window glass because it can break.
      Remove window regulator electric drive retaining screws through holes.
    5. Remove window regulator electric drive (23394) from front door power window regulator.
    6. Raise front door window glass to full up position by hand and secure with tape.
    7. Go to Step 5.

  2. Remove front door trim panel and front door trim shield. Refer to Section 01-05 .
  3. Remove front door window glass as described.
  4. Disconnect window regulator electric drive harness connector.
  5. NOTE: Use care not to enlarge sheet metal holes in the door inner panel.

    Remove two 1/4-inch rivets retaining lower bracket of front door power window regulator to inner panel. Use drift punch to knock out center pins for each rivet. Using a 1/4-inch diameter drill, drill out remainder of rivet.
  6. Remove three window regulator electric drive retaining screws from inside door to remove window regulator electric drive from front door power window regulator.
  7. Remove two window regulator retaining nuts.
  8. Remove front door power window regulator from front door (20124).
Installation
  1. Lubricate regulator mechanism with Teflon® Lubricant E7FZ-19590-A or equivalent meeting Ford specification ESB-M1C111-A.
  1. Install front door power window regulator minus motor (23208) into access hole in inner panel.
  1. Position front door power window regulator using upper studs and tabs on window regulator electric drive mounting bracket.
  1. Install rivets retaining front door power window regulator to door inner panel (1/4-20 x 1/2 inch screw and 1/4-20 nut and washer assemblies or equivalent metric fasteners may be used).
  1. Install two upper front door power window regulator retaining nuts.
  1. Install window regulator electric drive with three screws. Do not overtighten screws.
  1. Connect the window regulator electric drive harness connector.
  1. Install front door window glass.
  1. Adjust front door window glass as described.
  1. Install front door trim shield and front door trim panel. Refer to Section 01-05 snorkelbobby_38.gif

Posted on Feb 14, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2011 kia sorento sx will not open driver door with outside handle. Can only open from inside


There are a couple small plastic clips that hold the actuator rods in place. It sounds as if one of the clips came off or something broke in between. Either way the door panel must come off

Aug 22, 2014 | Cars & Trucks

1 Answer

My 2010 kia forte is showing me the code p200a intake manifold runner performance bank 1 what does that mean


Check engine error code of P200a Can find good explanation 2011 Hyundai...

P200A Intake Manifold Runner Performance (Bank 1) - General Information
Component Location
General Description
Variable Charge Motion Actuator (VCMA) is used for an adjustment of automotive flap and it is operated with two position, open and close. It makes swirl among intake air to reduce emission under cold start condition. This is worm gear driver type which doesn't guarantee restoring to limp home position in the case of loss of current supply. (This doesn't have mechanical return force due to no return spring.)
DTC Description
If PCM detects that the opened or closed stop position is out of the specified value, It sets P200A.

http://www.forteforums.com/forums/kia-forte-2-0l-engine-discussion/49809-p200a-new-used-2011-kia-forte-help-please.html
P200A on new used 2011 Kia Forte Help Please Kia Forte Forum Sedan Koup...

Aug 16, 2014 | 2010 Kia Forte

1 Answer

Why does the 2012 kia forte engine light turn on?


Engine Light Is On: 2010-2013 Kia Forte - What to Do - 2010 ...

www.carcarekiosk.com/...Kia_Forte_EX...engine_light/diagnose
A check engine light can indicate a broad spectrum of problems with your 2010 Kia Forte. ... The video above shows how to locate the on board diagnostics (OBD) plug on your 2010 Forte, how to read the trouble codes and how to reset or clear the checkengine light using a scanner on ...

KIA Check Engine Light (CEL) Codes - Kia Forte Forum : Sedan ...

www.forteforums.com/.../11832-kia-check-engine-light-cel-codes.html

May 20, 2012 - 15 posts - ‎8 authors
Old 05-19-2012, 08:42 PM Thread Starter. SketchedOut ... KIA Check Engine Light(CEL) Codes ... P0115 Engine Coolant Temperature Circuit Malfunction. 2012 Forte Koup: Check Engine light
13 posts
Jun 29, 2015
Automatic Transmission Shifting Harder Than Usual
13 posts
Apr 27, 2014
Check Engine Light + P200A code on new 2011 SX
15 posts
Jun 7, 2011
Oil filter caused check engine light?

Jul 05, 2014 | 2011 Kia Forte

1 Answer

How do you remove the rear speakers from a 2004 chevy impala?


Remove the rear seat. On later models remove the rear upper quarter panel by pulling down & out to disengage the retainer clips, then sliding the roof leg out from under the trim panel over the door. Detach the rear seat belts through the slot in the rear parcel shelf. Pry up the plastic clips securing the rear parcel shelf. Then lift up & out to remove it from the vehicle. Remove the speaker retaining screws or tabs. If the speaker seal has bonded with the metal shelf, hold the tabs & pry the housing away from the metal. Disconnect the electical connector & remove the speaker. Install in reverse order. Good luck!

Feb 22, 2011 | 2007 Chevrolet Impala LS Sedan New Cars

1 Answer

How do i [ut my rear bumper on my mustang its a 99


I am assuming you mean the rear fascia... this is the plastic part seen when outside the vehicle that covers the actual bumper

real simple to replace, about 6 screws and 2 bolts and the whole thing comes off

just make sure you pull it rearwards from the vehicle and DO NOT try to spread it away from the car

there are two very important clips in the rear quarter panel that the fascia mounts into

Mar 18, 2010 | 1999 Ford Mustang Cobra

1 Answer

I need to change the fuel pump on a 99 jeep grand cheorkee having trouble removing plastic bumper fairing so i can remove the hitch which is under the tank cover


Try removing the hitch first if it's a factory hitch. There should be three nuts on either side.

Check tor two 8mm screws inside the rear wheel well bolting the bumper to the quarter panel where they meet on the side. There might be a clip under each tail light.Then remove the plastic clips and slide it straight back.

Feb 28, 2010 | 1999 Jeep Grand Cherokee

1 Answer

Shifting is rough the rmp will jump about 400 rpm in between every shif..also my speedometer does not light up completely. my chrome bumper is starting to rust right by the headlights where the plastic...


Shifting--sorry to tell you, but as a mechanic who has rebuilt MANY 4L60E transmissions, I can promise you that your transmission is dead and needs to be completely rebuilt. Tell the builder that as a minimum over a stock rebuild you want: A hardened input shaft, The Beast sun shell, all Alto Red Eagle frictions and full-thickness Kolene steels, a new reverse drum and an extra-wide Carbon Fiber power band, the Sonnax "Super Hold" 1-2 and 3-4 servos, the Sonnax Heavy Duty 2-3 Shift Valve, the Sonnax .490" Boost Valve, and the Transgo valve body seperator plate. This will cost about 600 bucks more than a stock build, but the new transmission will be bullet-proof and will last until you get rid of the truck.
You can replace the dash lights yourself; the cover snaps off the fron of the dash, there are a few 9/32nds bolts that hold the instrument panel onto the dash, and the bulbs replace from the rear.
The rust, well, you can use metal polish and a fine cotton scrap and polish it off--but it will come back; for chrome to rust, there is a defect in the dip, or a non-stainless metal in continuous contact with it.

Feb 17, 2010 | 2003 GMC Sierra 1500

1 Answer

How do you replace rear bumper cover on 2009 Honda Civic


Should look for the bumper shocks and remove which ever is easiest, remove bumper then remove cover , replace cover and reinstall bumper, watch out for wires and clips might hold cover to side plastic.

May 24, 2017 | 2009 Honda Civic

1 Answer

How to install rear bumperr


there are two ten mm bolts that hold up the two corners of the bumper followed by a dozen or so push pin type plastic clips remove the two tens and pull the centers out of all the plastic clips and remove the lower halves, the bumper then has a plastic bracket on each side that if pulled straight back will slide right off, as for the sheet metal reapir you can either buy a cheap bodymans slide hammer and drill and pull where it needs or if there is damage to the bumper rebar ( metal bar under cover) you can get a ratcheting "come along" and set the ebrake and chain the other end to a tree, and pull it that way .sounds like you may even be able to use a big sledge hammer and knock the trunck back out also -jeff

Aug 31, 2008 | 2001 Honda Civic

2 Answers

1996 grand cherokee bumper


there is a trim panel on top of rear bumper if you look underneath there are clips that go through metal bumper also there are 4 plastic fasteners that will need to be replaced after removing best to get clips at dealer cheap enough hope this helps ya

Jul 07, 2008 | 1996 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...