Question about Pontiac Cars & Trucks

Open Question

Change from Kim to mileage on a 2006 Pontiac montana

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2920 Answers

SOURCE: 2002 Pontiac Montana Thermostat replacement

check the coolant level fiirst...if that is low it wont give you any heat.....to change the thermostat you have to follow the top radiator hose to the engine.at the send of it you will see a clamp take it loose...then you will see the thermostat housing its held in place by 2 bolts . once you remove them you have the thermostat....make sure you clean all the old gasket material off both the housing and mount.also make sure you get a new gasket.

Posted on Jan 29, 2009

Fixe_You
  • 1800 Answers

SOURCE: how do i change the rear tail lamp bulb in my 2006

Bulbs used in most other lighting fixtures fit into sockets and are held in place by spring tension or mechanical force.
f19-42.gif Common type of automotive bulbs. Bulbs are coded with numbers for replacement purposes. Bulbs with different code numbers might appear physically similar but have different wattage ratings.
There are two basic construction designs for exterior lights: those in which the lens is removed and then the bulb removed from the front, and those in which the light assembly must first be removed, then the socket from the back of the assembly, and finally the bulb from the socket.

  • Removing the lens from the latter type assembly could cause serious damage to the reflector due to dust and other contaminants.
  • Wiping the reflector surface to clean it can also seriously reduce the light's brightness. Therefore, do not remove the lens from light assemblies in which the socket and bulb are removed from the back of the assembly.
  • The bulbs are held in their sockets in a number of ways.
  • Some bulbs are simply pushed into and pulled out of their sockets, and some are screwed in and out.
  • To release a bayonet-style bulb from its socket, the bulb is pressed in and turned counterclockwise.
  • The blade-mount style is removed by pulling the bulb off the mounting tab, then turning the bulb and removing it from the retaining pin.
  • To replace a bulb, remove the bulb accordingly from its socket, and insert a new bulb.

Posted on Jun 25, 2009

fingaz22
  • 1068 Answers

SOURCE: Changing the front brake pads on a 2006 Pontiac Montana SV6

no that is only the older rear calipers on gm and others. the fronts do not have that style caliper and sound like the calipers are frozen and may be way your changing the pads. try opening the bleeder screw and then compressing them if they go then you need need brake hoses and if not you need calipers. god luck man

Posted on Dec 13, 2009

  • 14036 Answers

SOURCE: How do I get to

LOOK IN THE OWNERS MANUAL IN GLOVE COMPARTMENT.LOOK IN THE BACK INDEX IN OWNERS MANUAL FOR BULBS REPLACEMENT.IT HAS PICTURES AND PROCEDURES HOW TO REPLACE TURN SIGNAL BULBS.

Posted on Jun 09, 2011

streettunerj
  • 2 Answers

SOURCE: Pontiac Montana 2006 won't start just clicks but

it sounds like the starter motor could be worn out, or could be as simple as the main pos wire is bad or corroded

Posted on Jan 18, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Pontiac Montana delayed transmission shift


my best answer would be is to check the condition of its fluid it might need a fluid and FILTER change .

Jun 06, 2014 | 2006 Pontiac Montana SV6

1 Answer

2005 PONTIAC MONTANA FUSE BOX DIAGRAM


On this website you find fuse box diagram for Pontiac Montana SV6 2005 - 2006

Pontiac Montana SV6 2005 2006 fuse box diagram Auto Genius

Mar 02, 2013 | 2006 Pontiac Montana SV6

1 Answer

Where 2005 Pontiac Montana SV6 heater fuse in the box


On this website (link below) you find fuse box diagram and description for Pontiac Montana Sv6 (2005 - 2006)

Pontiac Montana SV6 2005 2006 fuse box diagram Auto Genius

Feb 01, 2013 | Pontiac Montana SV6 Cars & Trucks

1 Answer

How to replace shift solenoid on 2006 pontiac montana


which 1 do you need to change/ there is 5 to 7 of them12_6_2012_11_48_46_pm.gif

Dec 06, 2012 | 2006 Pontiac Montana

1 Answer

Pontiac Montana 2006 won't start just clicks but


it sounds like the starter motor could be worn out, or could be as simple as the main pos wire is bad or corroded

Jan 18, 2012 | 2006 Pontiac Montana

1 Answer

I have a 2006 Pontiac Montana and when I put gas in, It stalls. Then I give it a little gas and it runs. My husband thinks it the starter??????Tune up? Fuel Pump?? Thank you Mrs. C.


Hi Mrs. C
the starter is NOT the problem the starter only cranks the engine has nothing to do once its running
it could need a TUNE UP depending on the mileage
If this was my vehicle i would replace the fuel filter and check the fuel pressure before you spend money on replacing the fuel pump
and FLUSH the FUEL INJECTORS
hope this helps

Aug 19, 2010 | 2006 Pontiac Montana

2 Answers

2006 pontiac montana i cant stop wiper blades mid stroke to change them cant reach them when they return to down in hood again


when running the wipers turn the key off upon were you want the wiper to be positioned at for your work

Jan 01, 2010 | 2006 Pontiac Montana SV6

1 Answer

Changing headlamp on a 06 pontiac montana


There should be two or 3 wing nuts securing the headlamp assembly on. Remove the nuts and the housing should just slide out for you to change the bulb

Oct 05, 2009 | 2006 Pontiac Montana SV6

1 Answer

Pontiac Montana '99 Water Thermostat removal


Yes, it can be removed and run without the thermostat. However, your gas mileage will suffer and the heater may not work very well.

Apr 29, 2009 | 1999 Pontiac Montana

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...