Question about 2000 Hyundai Elantra

1 Answer

I need to see what each pin from external transmission connector are for coming from the valve body on a 2000 Hyundai Elantra.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

I need to see what each pin from external transmis - 2017-05-02_13-14-24-ftmhukslxlxzycdgm5zpb5g2-3-0.jpg

Posted on May 02, 2017

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Hyundai elantra shifts into overdrive but just slips.


Do you have a check engine light on? Any fault codes?

Jun 08, 2016 | 2000 Hyundai Elantra

1 Answer

When replacing the shift solenoid, does the transmission fluids need to be drained to do this?


Yes drain fluid remove transmission pan remove valve body be careful and make sure u install bolts in proper order also u need to replace the harness in the transmission. Need step by step directions let me know .

Feb 25, 2013 | 2001 Hyundai Elantra

1 Answer

What do i need to buy for a tune up on my 2000 hyundai elantra


- Spark Plugs (make sure they are gaped properly)
- Spark Plug Wires
- Coil Packs (if needed) or Distributor Cap & Rotor (which ever so equipped)
- Air Filter
- Fuel Filter
- Oil
- Oil Filter
- Transmission Filter (optional)
- Transmission Fluid (optional if you do change the trans filter you will need the fluid)
- PCV Valve (optional)
- Bottle Of Fuel Injector Cleaner (add to fuel tank kind)

Jan 17, 2011 | 2001 Hyundai Elantra

1 Answer

Have a 99 sonata stuck in 3rd gear have code p173 replaced auto trans relay stil have problem what should i do


fuel trim malfunction is po173,not transmission problem.This would be a fuel related problem,but the stuck in 3rd gear is,it maybe a stuck governor,or valve in the valve body,try a product called lube guard at napa,it works wonders.

May 04, 2010 | 2000 Hyundai Elantra

1 Answer

2000 Hyundai elantra transmission delay, reverse going


Did you check the transmission fluid level? If necessary, add fluid. However you probably have a more serious problem. Take the car to a qualified transmission mechanic.

Dec 09, 2009 | 2000 Hyundai Elantra

1 Answer

Describe your is there a sensor on a 2000 Hyundai elantra automatic transmission Problem


YES!... There are many sensors on an automatic transmission which could pose a problem -- depending on what the problem actually is. For example, there are 'input' and 'output' speed sensors, there is a fluid temperature sensor, there is a vehicle speed sensor, and there are several solenoid valves located inside the transmission connected to the valve body. Each and every one of these items can be a problem -- again -- depends on what the problem ACTUALLY is. Agreed?

Oct 03, 2009 | 2000 Hyundai Elantra

1 Answer

I need to know what type of fluid my manual transmission takes and where to put it on a 2000 Hyundai elantra


manual transmissions should never need fluid unless u have a leak. theres a plug on the side of the transmission. if u have your oil changed at a shop they can check it for you easily.

Jun 13, 2009 | 2000 Hyundai Elantra

1 Answer

6pin valve body trannny to 4pin using 6pin's TCM


First of all, which component(s) are you replacing? Only the valve body? If so, then there's something different about the one you took out compared to the one you're putting in - that can be dangerous! BEST SOLUTION: Replace/Install in the correct part at the beginning.

Apr 29, 2009 | 2000 Hyundai Elantra

1 Answer

Reverse gear almost dead in 1998 Lantra auto..


You have a bad O-ring seal in the valve body of your transmission. The reason you barely move when you rev high, is because the trans fluid isnt going to the correct part of the valve body due to the bad seal. This should be a repair you can do yourself if you have any mechanical experience, OR a transmission shop may be able to rebuild the valve body for you.

Dec 31, 2008 | 1998 Hyundai Elantra

Not finding what you are looking for?
2000 Hyundai Elantra Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...