Question about Mini Cars & Trucks

2 Answers

Classic mini starts and runs perfectly but does not show any igniton lights when switched on, occasionally shows igniton light while running indicating a faulty alternator

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 20 Answers

Check your wiring. Get a Haynes mini manual and trace your wiring from the ignition switch to the starting and charging system back to the speedo head.

Posted on Apr 23, 2017

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Passionate:

    Visited the website for 10 consecutive days.

    Habit-Forming:

    Visited the website for 3 consecutive days.

  • Expert
  • 139 Answers

Probably a fuse box issue as the oil light is on a different circuit to the batt' light.
you also might have a dead alternator, check out put when running with the relevent tester.

Posted on Apr 23, 2017

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Suddenly problem showed, idle at 1000 rpm (know that normal is 600), traction off light, loss of power, stopped running after few mins. NO Check engine light came on!!!


You should take it to a ASE certified repair shop that has the diagnostic equipment to check it out , an I don't mean a code reader . I mean a factory scan tool that can look at engine sensor data PID'S ! It Just stopped running ? Will it start right up again or is it dead . Check for spark , that means pulling the Ignition Coil Housing an using special tool J 36012-A , there just plug wires . Install a J 26792 Spark Tester on #1 spark plug jumper wire. Connect the #4 jumper wire to a good ground. Connect the other jumper wires from the 2-3 ignition coil to the respective cylinders,Connect the J 43298 Igniton Module Tester to the ICM.
Do a fuel pressure test ! With the Factory scan tool check the idle air control valve counts , an see if it can be controlled . 220 K miles , ever have timing chain replaced ?

Oct 14, 2015 | 2004 Chevrolet Cavalier

1 Answer

FORD 2001 CV - Headlights and running lights off, instrument cluster lights off, dome light off, rear window defogger off, turn signals not working. Check all mini fuses under dash OK, maxi and mini fuses...


Your owners manual will show you the location of the relay, for the lights, swap the lights relay with another on. Also, if the light switch is working, and the fuse is good, you will be able to hear the relay click. Have a helper run the light switch while you listen for it to click.

Dec 23, 2014 | Cars & Trucks

1 Answer

Drl light on dash board


The DRL light is for the daytime running lights. Maybe you have a short in the wiring, or a bulb is going bad.

Jun 27, 2012 | 2002 Acura MDX

1 Answer

2000 chevy blazer -starts great-idles great when after start in idle-misses when accelorating until shift-then misses occasionally until it warms up-then runs perfrct at any rpm-continues to run perfect...


check see if one of the coil packs have a crack in it. if so replace it if you start the car in the dark with hood poped the crack will show right now looks like a light show

Aug 02, 2011 | 2000 Chevrolet Blazer

1 Answer

Getting security light car wont start How do i check what the problem is ?


these cars are notorious for the security locking up on them you can usually unlock them yourself by turning your ignition key on all the way until all the lights come on an let it sit for 10 minutes and then try to start it it should start but it shows that there is a problem with the key switch, or your igniton key chip could be going bad. hope this helped

Jan 03, 2011 | 1998 Chevrolet Lumina

1 Answer

THE ABS WARNING DASH LIGHT IS ON PLUS THE TC LIGHT AND THE LIGHT SHOWING MY FREELANDER UPLIFTED FROM THE BACK AND A CAUTION SIGN. WHAT DOES THIS MEAN? PLUS OCCASIONALLY WHEN I START THE CAR THE RED CAN...


replace brake peddleswitch first, if that dont cure, replace the throttle peddle switch, and if that dont worrk replace the reverse switch on gear box and the forward detector switch for the hill desent. as for the oil warning light it can only be one of three things , ie low oil, bad wiring or switch and last the worst of all oil pump failure.

Jan 06, 2010 | 2002 Land Rover Freelander

2 Answers

Need a wiring diagram for a chevy s10. brake


your power starts at the brake light fuse,check with a test light,then proceed to stop light switch on brake pedal under dash,one wire will be hot when when you check it with your test light, the other won't be until you press down the brake pedal then the power flows through to the second wire,if no power to second wire replace switch,if you have power remove tail light bulbs and check for power in side socket.

Nov 24, 2009 | 1997 Chevrolet S-10 Pickup

2 Answers

Intermittent Oil light at cold start


your oil level may be low, your oil sensor may be faulty, or your may have a leak

Sep 16, 2009 | 2005 Chrysler Town & Country

1 Answer

I have a yellow triangler light showing while the car is running


I suspect that yellow triangle lamp is your emergency flasher switch. If you were to press the switch (triangle) you would find the flashers start working and if you press it again they would stop.

Jan 11, 2009 | 2006 Volkswagen Passat

1 Answer

Something weird on a 2005 chevy Silverado


The next time it acts up try turning the key back just a little and see if everything comes online if it does you will need to replace the igniton switch not the key lock the electric switch that will be located in or on the sterring colum.
Jim

Oct 06, 2008 | 2005 Chevrolet Silverado 1500 2WD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mini Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Mini Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...