Question about Cars & Trucks

Open Question

Stuck lock bar, won't pull down - Cars & Trucks

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rear latch lock stuck in the open position


use a round bar ( a screw driver ) and place it under the latch and pull the latch out as you press the button to unlock as if you were opening the door.

Jan 06, 2014 | 2008 Chevrolet Uplander

1 Answer

Rear lift gate lock stuck in the closed position


use a round bar under the lock tongue and pull it back as you press the button to open the latch

Jan 06, 2014 | 2008 Chevrolet Uplander

1 Answer

Trunk won't latch closed


So you know how to work the latch, and the latch is working.

Now you need to look and the holding bar, if you have to remover the plastic cover to see how it's bolted on do it.

Sounds like the bar moved down so the trunk hits the gasket before it can lock on the bar.

See if loosening the bar bolts will allow the bar to be raised just a hair.

Apr 14, 2013 | Cars & Trucks

1 Answer

Rear passanger door on ford f-150 extended cab is stuck and won't open. what to do?


THE BAR THAT PULLS THE LATCH OPEN HAS PROBABLY CAME OFF INSIDE THE DOOR. HAVE TO REMOVE PANEL FROM DOOR AND REPAIR ROD

Jul 14, 2012 | Ford F-150 Cars & Trucks

1 Answer

How to fix a 2001 vectra seat release


You can try to pull on the belt with the plastic trim piece removed the take a flat tipped screwdriver the release the arm or bar holding the belt in the lock position. Most of these have a spring on them. That spring can fall out. Or sometimes the bar or lock arm may be jammed and needs to be pried loose then lubricated to prevent this from repeating in the future.

Jun 04, 2012 | Holden Vectra Cars & Trucks

1 Answer

'91 LS400, trunk will not open. key will not turn, electric latch switch clicks but won't open. valet lock in open position. Tried 1) disconnect battery, reconnect battery, use switch, push down on...


If you hear the sound of the electric latch switch, then it's working but stuck somehow. Just put the key in the switch and turn it to the right and then pull up the trunk or ask someone to help you. it will open. I tried it today and it opened with me. It was stuck from inside by some kind of a broken plastic pieces. Just removed it and now it's working fine. good luck

May 26, 2011 | 1991 Lexus LS 400

1 Answer

Key stuck in ignition


We just had this same problem today!!! We have a 2006 Ford Focus and the car would start and we could still drive it, but the key locked in the ignition and would not come out. We tried everything, but what worked was to move the black sleeve (has three plastic rings at top close to handle bar) around the gear shift handle bar, up. It was pushed down about a half inch and it took some pressure to pull upwards, but once we pulled the plastic black sleeve around the gear shift handle bar up, the key came out! Easy as pie!!! Saved hundred of dollars! YAY!!!

Aug 10, 2010 | Ford Fusion Cars & Trucks

2 Answers

My passenger seat won't lock into position. It slides back and forth as I drive and the bar that you pull on to move it back and forth is stuck in the up position.


There is a spring that pull's the handle back to lock position that might be broke or the locking mechanism might be gummed up.the spring can't be bought seperatly so check a hardware store or replace the seat track assembly.

Aug 11, 2009 | 2000 Chevrolet S-10

1 Answer

My driver side door wont open how do i get it


sounds like the door lach is sticking
use some wd40 spray the lock and let it sit 4 a while
now since you have the inside skin off reach inside the door with 1 hand and try and open the door from the outside and see if the lock bar moves it usualy pushes down i think on a lach
if it goes up and down with no resistance make sure it is contacting the lach if yes make sure the door is unlocked
somtimes the lock is just stuck
after unlock open the door
push down on lock bar attached to lock then pull up on it if that fails to open door
after that all fails unlock door have friend pull handle and then give the door a good kick from inside just remember not the kick the glass

Jun 25, 2009 | 1998 Mercury Mystique

2 Answers

KEYS LOCKED IN THE BOOT OF A BMW 320 2003 REGISTERED


Hiya, same thing happened to me with my e39 2yrs ago. Keys were stuck in boot for 2days, in the end I sussed out how to get them.......you have to take off the reg plate, then, with a pencil, drag a line from where the key goes in down to the catch where the boot actually locks. Then you drill a hole anywhere along that line, this will give you access to the bar that connects the locking mechanism, just put a long nosed pliers into the hole and pull the bar, and bingo the boot opens!

Mar 22, 2009 | 2003 BMW 325

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...