Question about Honda Cars & Trucks
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Blend door not working.
The bleed door controls air temp not where it comes out, dash, floor, defroster, this is most likely a mode control switch problem, that switch is on the ac control head.
Posted on Sep 23, 2008
both are located in the exhaust system. You have to get the car off the ground and follw pipes. You cant miss the O2 sensors.
Posted on Jan 15, 2009
SOURCE: CODE RADIO HONDA CIVIC 2000
I CAN GO ONE STEP FURTHER. IT IS IN YOUR GLOVE BOX:) YOU JUST HAVE TO LOOK FOR IT:) IT A STICKER IN THERE NOT LABELED JUST A 4 OR 5 DIGIT CODE:)
Posted on Feb 15, 2009
Hey I had the same code and I have a 2000 honda civic lx. My cousin
works at honda and drives a '96 honda civic and he has had that code
before on his car as well.
First thing he came up with was that the catalytic converter was cracked. We checked mines, and lo and behold, that's what it was.
Look under your hood, and there should be a catalytic converter with a sensor sticking out of it. It is connected to the exhaust manifold and the sensor sticks out of the heat shield. Around the sensor, look for a crack. If there's a crack, that's your problem.
Posted on May 03, 2009
Step one Look at the inside door handle. Behind it you should see a little cover, You pop that off and there will be 2 phillips head screws behind it. remove them.
Pop out the door handle, and unplug the power lock plug,
Youll also have to take the door lock rod, by spinning the plastic door handle 90 degrees until u can wiggle it out.
next remove the sail panel( The little triangle shaped piece in the corner of the door on the top, ( may have a tweeter in it) ( it just pops out)
Next take a screwdriver (flat head) and pry off the cover of the door handle, there will be
2 phillips head screw behind it ( remove screws)
Unplug power window connector (big green plug)
Now just start gently pry the door panel off with a screw driver, see if u can peek behind the panel and see where the panel clips are, and pry near those areas
Posted on Apr 03, 2010
Tips for a great answer:
Jul 18, 2015 | Honda Cars & Trucks
Mar 20, 2014 | Cars & Trucks
Temperature Control Blend Door Failure
all modern cars there is a tiny DC electric motor driven gear drive
that moves a plastic door that blends heated and cooled air from the
AC and the heater core, this is called (interestedly enough) the air
temperature control blend door actuator. The motor that moves this
door fails because the door starts sticking from warping, most common
complaint is no heat but it can be no AC as well. To replace these
parts (blend door and blend door actuator) you must remove the entire
dash from the car.
Oct 30, 2012 | 2000 Ford Focus
Sep 05, 2012 | 1997 Honda Civic
Jul 17, 2012 | 1995 Honda Civic
Feb 19, 2011 | 1997 Honda Civic
Aug 18, 2008 | 2002 Honda Civic
Apr 23, 2018 | Honda Cars & Trucks
32 people viewed this question
Usually answered in minutes!