Question about Opel Astra

Open Question

Hi what are the 2 boxes called next to the head on the right they have wires coming out and held on by big silver clips astra 1.6 2001 thanks

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76649 Answers

SOURCE: whining silver box on top of engine.

Go to the dealer and ask a part person to look at it.

Posted on Jan 17, 2014

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change an air filter on a 1999 ford escort


Hi,as you look in the engine bay you will see on the write hand side there is a big box it has aconnection block with a wire coming out of it,that is the air filter box,as you look at it from the front of the car you will see on the right hand side of the box two wire faseners and there is another one fervist away from you on the left hand side of the box,you need to feel at the bottom of the clip and pull it upwards,do this to all free of the clips,now at the front of the box on the left hand side you will see a crossheadscrew you will need a cross head screwdriver to undo the crossheadscrew,then just carefully lift the box at the right hand side and replace air filter.
hope this was some help all the best.

Aug 13, 2015 | Ford Cars & Trucks

1 Answer

Glow plug light comes on but glow plug dont heat


there is a fuse link on the bulkhead or it can be located on the paneling around the engine bay ,, it is in a black plastic box about 2 inchs square the cover is just clipped in place inside you will find a silver coloured fuse link ,,,this usually burns out or blows and stops the glow plugs getting power ,,,,even though the glow light will still work,,,, replacement is simple it is held in place by 2 screws usually phillips or cross headed,,,, the fuse link is cheap and easily available,,, hope this helps

Feb 11, 2012 | 1997 Volkswagen Jetta

2 Answers

My rig is a 1991 Ford F250, auto, 4x4 with a 460 engine. I have a antifreeze leak somewhere above my oil filter. I think it is coming out of the silver box that my bottom radiator hose goes into... but I...


Is that silver box by chance the water pump? I would imagine the small hose is for the heater ... The big hose goes in, that's where it would draw in the water/coolant mix.

Jun 24, 2011 | Ford F-250 Cars & Trucks

1 Answer

My 99 nissan frontier blower speeds work on 1,2,3 but, not on 4 . Any solutions?


usually its the heater fan resistor that is bad. it controls the fan speeds for blower motor. The blower motor is mounted under the glove box. It is in the corner somewhat covered by the kick panel. The card, at least on my pathfinder, is held in with 2 phillips head screws. The plug has 4 wires, one large wire and 3 smaller wires. You should see it very near to and parallel with the firewall.

The card has an on board fuse that is not replaceable. It is located on the passenger side fire wall to the left of the blower moter under the glove box. Held in with two silver phillps screws

Mar 07, 2011 | 1999 Nissan Frontier

1 Answer

2003 Chrysler T&C - AC is cold, but no fan. I thought I'd see if this was a DIY issue, or if I need a pro-mechanic. And if I need a pro, at least I would know more about the issue before being fed to...


Sounds like you need a blower motor resistor. It's actually bolted to the air duct behind your dash glove box with 2 hex screws. It's a black case with an aluminum heatsink protruding from it, and has 2 wire plugs coming from it. The easy fix is to replace it for about $85. The cheaper, but more difficult fix is to replace the chip called a mosfet on the circuit board inside the black case. It's located next to the heatsink and is held tightly to the heatsink by a metal clip. The chip itself costs $1.99 (at www.mouser.com , part number 511-STP85NF55). Solder the new mosfet to the circuitboard, re-attach the metal clip & black casing, and assemble back in behind the glove box & plug the wires back in. Worked for me!

Aug 18, 2010 | 2003 Chrysler Town & Country

1 Answer

How do I remove the glove box? I have removed 2 screws along the inside top and one screw on the right side that also had wire to support door. But the glove box still will not come out. It won't even...


After removing the three screws, the glove box is held with two clips - one on each side. The clips will come undone when you pull on the glove box with a little force. You will then need to unplug the switch/lamp connector.

Oct 01, 2009 | 2002 Buick LeSabre

1 Answer

This car should have main fuse box with the big fuses,car won't start; head lights won't come on now


1994 jaguar xj6, I know of three location that the fuse box exist. 1. just in side the drivers door on the floor inside the front fender where your left foot could rest, 2. the oppsite side passenger side right foot next to the door jam below the door hinge front fender behind the wheel. the 3. is in the center consule where the tapes are stored, is there any other places a fuse box exist on the 1994 jaguar vandenplas xj6 thank

Jun 03, 2009 | 1994 Jaguar XJ6

1 Answer

How to change my headlights on Honda 2005 CRV


easy cheesy! Ive changed mine twice. The headlights are small bulbs. Make sure you get the right one (hi-beam vs low-beam). Unplug connector at back of bulb / headlamp unit, remove rubber weather seal (pops right ot). The bulb is held in with a small wire clip that is hard to get back on but can be done. Its spring loaded. Drop wire clip, turn bulb assya 1/4 turn, and it comes right out. Remove bulb from holder and replace. Reverse steps and VOILA!

Dec 27, 2008 | 2005 Honda CR-V

1 Answer

Swapping out a Stock CD/Radio in a 2005 Chev Malibu Maxx


To get the center console you need to take a lot of the interior dash off. It sounds bad, but there are no real important parts to worry about damaging. Start by removing the silver trim that is just above the glove box. It just pulls off, being attached by pressure clips. Start at one end and work your way over. Next remove the glove box, it is held on by a couple of screws. Open the passenger door and begin removing screws. This exposes a screw holding the center console panel on. The procedure for the driver side is similar to that on the passenger side. After the two screws holding on the center console are removed you can pull off the panel. It is held on by pressure clips. The Driver information center and climate control are held on by a couple of screws. The unit is now readily removable, and much to my surprise there is a good deal of room behind the radio. You can short cut some of the steps at your option, you will have to pull back some the panels to reveal the center console screws, but you risk cracking the other panels in the process.

Oct 27, 2008 | 2005 Chevrolet Malibu Maxx

1 Answer

1977 Ford F-250 removing heater blower fan


hello your heater blower fan is located in your heater box pass you will see a stop sign shaped flat flared end metal piece about 6inches diameter all the way around held in with either 6 or 8 1/4bolt heads unscrew these unplug wire feed pry lightly away from box fan assembly will come right out if your blower moter doesnt come with plastic fan fins you will need to use the old one usaully held on with a clip once removed slide off the fan shaft install to new motor reintall if no gasket take black permatex apply a thin coat around outer edge of new fan tighten plug power back on done goodluck

Jul 17, 2008 | 1997 Ford F250 SuperCab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Opel Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Brad Brown

Level 3 Expert

15950 Answers

george parkes

Level 3 Expert

975 Answers

Are you an Opel Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...