Question about 2002 Mazda Protege

Open Question

I need a diagram of pcv valve location for 2002 mazda protege

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

michigan man
  • 3533 Answers

SOURCE: need the fuse box diagram

the fuse box lid normally has a diagram on it there is a fuse box under the dash on the driver side and there is one under the hood as well.and if it does not have a diagram stop by the dealer in the parts department and they can print you one if you have an owner manual there is one in there also.

Posted on Feb 11, 2009

old marine
  • 1924 Answers

SOURCE: replace alternator belt 97 mazda protege

Here's the page from the AutoZone online manual for replacing drive belts.

Posted on Mar 10, 2009

c17hydro
  • 2984 Answers

SOURCE: fuse box diagram

Hope this helps...let me know and I will get a better one:

081afc9.gif

Posted on Jun 28, 2009

  • 32 Answers

SOURCE: obd2 code p0300 on mazda protege 2002

Just had one of these with a maxima, the code is multiple random misfire, when a misfire occurs, to start is do the basics, replace the plugs, check fuel pressure, clean throttle body, and coolant is topped up. also I have seen if the O2 sensor is not working correctly is can cause a misfire, you will need a scan tool to look at what the O2 sensor is doing, o rby back probing the sensor (don't damage the O2 sensor wires). If it wires replace them as well, if it has coils they usually dont give that code if one fails, it will pinpoint that a certain coil if one fals.

Posted on Oct 02, 2009

wrenchjockey
  • 75 Answers

SOURCE: I need a belt diagram for - 2002 mazda protege

7feb5ea.gif

Here you go!

Posted on Oct 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you show me a diagram of an egr valve for a 1999 mazda protege?


https://www.google.com/search?biw=1536&bih=710&tbm=isch&sa=1&q=99+mazda+protege+egr+locaton&oq=99+mazda+protege+egr+locaton&gs_l=img.12...21014.28237.0.31287.18.14.1.2.2.0.139.1095.13j1.14.0....0...1c.1.64.img..2.7.396...0j0i30j0i8i30j0i24.6332pmbkKZI#imgrc=jJ5CIOyc_k3dbM%3A

Oct 04, 2014 | 1999 Mazda Protege

2 Answers

What is the part name for the hose on top of my Protege DX valve cover?


Just the hose or the PCV (not pvc) valve? The hose is probably a dealer-only item - go to the Mazda parts department w/the broken piece and they'll get you a new one. The PCV is avl. @ most auto parts stores - and is cheap - <$20.

GL,
Td

Oct 08, 2012 | 1993 Mazda Protege

1 Answer

Where is the EGR valve on a mazda protege 5


I own a 2002 Mazda Protege5 with the FS2.0 Motor. The EGR Valve is located below the throttle-body. You must take off the Intake tube to get a good view of it. To replace it I think you might have to take off the throttle-body, but I'm not sure about that...(yet)


NOTE: Mazda put out a technical note stating that "if your car has sat for a long time, the egr valve could be damaged by moisture (rain) and will need to be replaced". My 2002 Protege sat for 3 weeks and the rain caused this exact issue and had to be replaced. How did I know? The engine light came on (after never coming on) and the car had an extremely rough idle. Total cost was ~$400 (ouch).

Oct 13, 2011 | Cars & Trucks

1 Answer

Were is the egr valve located for mazda rotege5


2002 Mazda Protege5 with the FS2.0 Motor. The EGR Valve is located below the throttle-body. You must take off the Intake tube to get a good view of it. To replace it I think you might have to take off the throttle-body.

0335fe8.jpg

Fig. Exploded view of the intake manifold assembly with 2.0L (FS) engine

Good luck (remember rated this).

Jun 25, 2010 | 2003 Mazda Protege

1 Answer

How to replace the serpentine belt of protege 5 2002, also need the routing diagram


Posted by Asker under 1997 Mazda Protege for their 2002 Mazda Protege 5.
Both are included Below

Click on the following free direct Link. It has the Belt Diagrams for the 1997 Mazda Protege with either the 1.5L DOHC In-Line 4-Cylinder or 1.8L DOHC In-Line 4-Cylinder Engines; along with various engine options (AC/No AC, etc.). Included are Instrucional Diagrams for loosening (for removal) and tightening (for replacement) using the Adjustment and Locking Bolts/Nuts.
http://www.2carpros.com/car_repair_information/year/1997/make/mazda/model/protege/1997_mazda_protege_drive_belt_routing_diagram.htm

Click on the following free direct Link. It has the Belt Diagrams for your 2002 Mazda Protege 5 2.0L DOHC In-Line 4-Cylinder Engine; along with various engine options (AC/No AC, etc.). Included are Instructional Diagrams for loosening (for removal) and tightening (for replacement) using the Adjustment and Locking Bolts/Nuts.
http://www.2carpros.com/car_repair_information/year/2002/make/mazda/model/protege5/2002_mazda_protege5_drive_belt_routing_diagram.htm

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

Apr 13, 2009 | 1997 Mazda Protege

1 Answer

Replace rear pads on a mazda protege es 2002


try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you

Mar 19, 2009 | 2002 Mazda Protege

1 Answer

2002 Mazda Protege horn location


Their are usually in back of grille or on the underside of rails. you will need to take off the front bumper to get access.

Jan 24, 2009 | 2002 Mazda Protege

Not finding what you are looking for?
2002 Mazda Protege Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...