Question about Cars & Trucks

Open Question

How can i view my transponder activiy - Cars & Trucks

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

WHAT IS 2006 chevrolet malibu CODE B3935


B3935
Transponder Authentication Error
TDM
DTC B3935

When an ignition key is inserted into the ignition lock cylinder and the ignition is switched ON, the transponder embedded in the head of the key is energized by the exciter coils surrounding the ignition lock cylinder. The energized transponder transmits a signal that contains its unique value, which is received by the theft deterrent module (TDM). The TDM then compares this value to a value stored in memory, learned key code. If the value is correct, the TDM sends a random generated number to the transponder. This is called a challenge. Both the transponder and the TDM perform a calculation on the challenge. If the calculations match, the TDM sends the fuel enable password via the serial data circuit to the powertrain control module (PCM). If either the transponders unique value or the calculation to the challenge is incorrect, the TDM will send the fuel disable password to the PCM via the serial data circuit.

Nov 12, 2017 | Chevrolet Cars & Trucks

1 Answer

I want to add 1 more transponder to my account


this is fixya we dont sell transponders need to notify the ezpass or who ever the company is for your request

Dec 20, 2016 | Cars & Trucks

1 Answer

How toprogramm car key toyota matrix


  • 1 First you will need to purchase a blank Toyota transponder key. You can do this from the dealership, a locksmith, or an online source such as eBay. Once you have the key, take the blank key and the master key to a locksmith that he or she can duplicate the key. This will be much cheaper than the dealership.
  • 2 Now that you have the newly cut key and the master key, you can program the Toyota transponder key. Sit in the driver's side of the Toyota vehicle. Press and release the brake and gas pedal simultaneously.
  • 3 Insert the master transponder key. Do not turn it. Push and release the gas pedal 5 times within at least 15 seconds of inserting the master key.
  • 4 Press and release the brake pedal 6 times within 20 seconds of completing step 3, then remove the master transponder key.
  • 5 Insert the newly cut transponder key into the ignition, but do not turn. Press the gas pedal once.
  • 6 Wait up to 2 minutes or whenever the security light on the dashboard turns off. Once the light goes off, remove the new transponder key and press the brake pedal once. The new transponder key should now be programmed. Test the key by attempting to start the engine. If the engine does not start, repeat the steps above.
  • Mar 02, 2015 | 2010 Toyota Matrix

    1 Answer

    Transponder and key


    Hi. No this would need to be renewed. I take it you mean the reader coil for the transponder is damaged, as the transponder itself is in the key. If the key transponder is renewed (not the reader coil around the ignition barrel) then the key would need to be coded to the car.

    Feb 04, 2014 | 2000 Volkswagen GTI

    1 Answer

    What is code B2799


    This Diagnostic Trouble Code (DTC) is output when the Engine Control Module (ECM) detects errors in communication between the Transponder Key Electronic Control Unit (ECU) assembly and the ECM, or in the communication lines. This DTC is also output when an engine start is attempted while the ECU communication ID between the transponder key ECU assembly and the ECM is different.
    Possible causes Faulty Key Faulty transponder key amplifier Faulty Transponder Key Electronic Control Unit (ECU) Transponder key amplifier wire harness Faulty Engine Control Module (ECM)

    Mar 02, 2013 | 2007 Lexus ES 350

    1 Answer

    Where is the remote transponder located on a 1994 buick lesabre


    It is probably located either behind the rear view mirror or under the dash panel.

    Feb 12, 2011 | 1994 Buick LeSabre

    2 Answers

    Does a 2003 ford escape have a transponder chip?


    YEP YOUR KEY TRANSPONDER IS READ THROUGH THE KEYLOCK CYLINDER READ COIL BY IMMOBILIZER CONTROL MODULE BEFORE CAR WILL START.IF CARRIER FREQUENCY SIGNAL IS NOT 100 - 150 KHZ RANGE CAR WONT START.YOUR CAR HAS TRANSPONDER KEY.MOST ALL LATE 96 TO 2011 VECHICLE CAR KEYS HAVE TRANSPONDER KEYS TO STOP CAR THEFTS.

    Oct 17, 2010 | 2003 Ford Escape

    1 Answer

    Immobiliser transponder not working


    hi the transponder is the chip in the key my car is the same its the red bit on the key.... and there is a reciver around the ignition barrel where the key go's to start the car its a black circle with 3 or 4 wire's runing to it you can't by pass this but i have been told that some are made with an external P.A.T.S system (Immobiliser system ) but same are built in tio the e.c.u if its external it might be poss to bypass im also so sure you can buy a key coder off the net try googleing it i hope this is a help to you ......

    Jan 04, 2009 | 1996 Ford Escort 4 Door

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    11 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    yadayada
    yadayada

    Level 3 Expert

    76691 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...