Question about GMC Cars & Trucks

Open Question

2014 GMC Sierra 1500 cruise set button does not set

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 12 Answers

SOURCE: removal of power steering pump on 1998 GMC Sierra 1500

you need a power steering pump puller the rest is simple any trouble let me know

Posted on Dec 24, 2008

  • 172 Answers

SOURCE: 2005 GMC Sierra 1500 - heater blows, but only cold air

Check coolant level. Check for heat at the heater hose going from water pump to heater core at firewall. Check to see that cable is moving coolant control valve from the closed to open position. Low mileage so it shouldn't be plugged heater core.

Posted on Jan 07, 2010

Testimonial: "You were absolutely correct. Low coolant level. Put in some 50/50 and we're nice and toasty now, but need to find out why coolant was so low. Thanks."

  • 432 Answers

SOURCE: 1990 GMC Sierra 1500 pickup. Windshield wipers, Cruise Control

May want to look at replacing the wiper circuit board.It is located on the firewall adjacent to the wiper motor and has a some what square black cover with 3 torx screws and wireing harness pluged into the side.We had a truck that every time you washed it the wipers would stay on until it dryed out.You can try removing it and spaying it down with contact cleaner just watch the brease on the two contact tips.Well hope this helps.

Posted on Feb 05, 2010

fixitriteman
  • 431 Answers

SOURCE: LOW OIL PRESSURE ON 2007 GMC SIERRA 1500. CHANGED

have it tested using a manual gage if still low then main baring ore most likely bad that would mean a over hall if is really low and bearings bad should be making rattle noise when started up first few seconds

Posted on Mar 11, 2010

Testimonial: "thanks alot.truck is not making a rattling noise.we did check it with a manual gauge.it read about 10 at idol. press. gets better as you incr speed"

coop442000
  • 187 Answers

SOURCE: I have a 1994 GMC 1500 Sierra with 350 engine 5.7

The timing (base), is 0 degrees before tdc. Keep in mind the timing connector must be unplugged. usually a brown wire with a black tracer, has a single connector, located under glove box, or by distributor. Thanks...

Posted on Sep 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2014 Sierra, found 3 fuse panels, have not found a fuse(s) for the 12v ports


Look in your manual the ports will be connected to another fuse.

Jul 27, 2016 | 2014 GMC Sierra 1500

1 Answer

How to change the license plate lights on a 2014 GMC Sierra


Do you have the book that came with your vehicle? that should tell you. My car one did.

Jan 19, 2016 | 2014 GMC Sierra 1500

1 Answer

What is maximum towing weight for a 2014 GMC Sierra double cab 5.3


This will be listed on the sticker inside your drivers door and also in the manual.

Feb 27, 2015 | 2014 GMC Sierra 1500

1 Answer

How doI program my Universal Garage door opener on my new 2014 GMC Sierra if I don't have the original hand held unit


contact the opener manufactures/ distributors and get the operating frequency of the receiver unit . You may need the services of a radio technician to adjust the sender ( remote) to that frequency

Aug 30, 2014 | 2014 GMC Sierra 1500

2 Answers

1990 GMC Sierra 1500 pickup. Windshield wipers, Cruise Control


May want to look at replacing the wiper circuit board.It is located on the firewall adjacent to the wiper motor and has a some what square black cover with 3 torx screws and wireing harness pluged into the side.We had a truck that every time you washed it the wipers would stay on until it dryed out.You can try removing it and spaying it down with contact cleaner just watch the brease on the two contact tips.Well hope this helps.

Feb 05, 2010 | 1990 GMC Sierra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...