Question about 2002 Dodge Durango

1 Answer

Switch on console

My knob broke for the headlights. I had to buy the whole assembly, but don't know how to get the old one off.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 36 Answers

TAKE THE DASH PANEL OFF THERE ARE 2 OR 3 8MM SCREWS, ONCE THEY ARE REMOVE YOU CAN SLIDE OUT THE HEADLIGHT SWITCH AND UNPLUG IT, ON THE BOTTOM THERE IS A METAL TAB, PRESS IT THE ROD WILL COME OUT, PLUG THE NEW SWITCH IN, BOLT IT UP AND THEN SLIDE THE ROD WITH THE KNOB INTO IT ONCE EVERYTHING IS ASSEMBLED, ONCE YOU PUSH IT IT WILL SNMAP INTO PLACE AND YOU ARE DONE

Posted on Jul 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have no power to my headlights,I've checked fuses and relay they are okay.I don't think there is no power going to the switch.Do you have a wiring diagram for the lights? Thanks


That is a bead headlight switch. You would have to replace the it with a new one. Actually you have to get the whole switch assembly where the head the switch to the headlight is integrated in.

May 24, 2011 | 1994 Toyota Pickup

1 Answer

Actually, my headlight switch knob fell out and I need to know how to secure the switch, that is now "floting" inside dash, and reinstall the knob? Al


should just push in as the switch has clip type things around the outer circumference so if its broke then my old favourite two pack araldite epoxy adhesive will perform wonders on this sort of job

Mar 12, 2011 | Ford Ranger Cars & Trucks

1 Answer

04 GMC Envoy XUV midgate window fell won't come back up; motor runs ,window won't move


The same thing happened to my '04 XUV. Discovered broken white nylon/plastic that retains the end of the lift cable. Ordered a new lift gate motor/mechanism assembly ($250) online and replaced it myself. Be sure to buy a new limit switch ($13) also. I did not and regretted it because you must remove the old limit switch from the old motor assembly so you can re-assemble it to the new motor assembly. While removing the old switch from the old assembly, I broke it. Had to then order a new switch. The cost to ship the switch separately was more than the switch. The whole thing did not really take that long and was surprisingly easy. It works great now.

Dec 13, 2010 | 2004 GMC Envoy

1 Answer

I can't change the direction of the heat and air conditioner . The switch to change it from defroster, to floor is broken. how do i fix it?


is it just the knob that broke or the whole thing
you can buy just the knob
if it is the whole thing then you will need to replace the HEATER CONTROL HEAD
hope this was helpful

Nov 14, 2009 | 2004 Pontiac Sunfire

1 Answer

Removing the whole pop head lights assembly from my 1997 corvette


Raise the headlights, either with the switch or manually by turning the knob on the headlight motor counter-clockwise.
Unplug the lights NOW to avoid an accidental closing on your fingers,
Remove the 3 philips screws holding the black plastic surrounding the headlights, and slide it forward, there is a small clip on the top that helps hold it to a corresponding clip at the top of the headlight,
Look inside the cavity and you can see the 5 nuts/bolts ( 6 on later years ) that need to be removed,
If you are on the driver's side you can now remove the whole assembly, on the passenger's side you must first unplug the headlight door control module.

Aug 25, 2009 | 1998 Chevrolet Corvette

2 Answers

Headlamp pull out nob broke so can't turn on head lights wondering how to repair


If just the silver bezel broke you can buy a new one and it snaps on like the other one did. So that way you don't have to replace the whole thing, but if the switch itself broke, then you'll have to buy a new one. Hope it helped!

Jan 04, 2009 | 1966 Ford Mustang

1 Answer

Headlight switch


REMOVAL & INSTALLATION
See Figures 1 and 2
  1. Disconnect the battery ground cable.
  2. On 1991-94 models, perform the following:
    1. Remove the ash tray assembly and the finish panel (snaps off).
    2. On the Explorer, remove the rear window wiper and heated backlite switch assembly (snaps out).
    3. On the Ranger, remove the storage bin (snaps out).
    4. Pull the headlight switch knob to the headlight on position. Depress the shaft release button and remove the knob and shaft assembly. 0900c1528018ef70.jpgFig. 1: View of the 1991-94 model headlight switch control knob release button
  3. On 1995-99 models, remove the instrument panel finish panel.
  4. Unscrew the mounting nut and remove the switch from the instrument panel, then remove the wiring connector from the switch.
0900c1528018ef71.jpgFig. 2: Exploded view of the 1995-99 model headlight switch componentsTo install:
  1. Connect the wiring connector to the headlamp switch, position the switch in the instrument panel and install the mounting nut.
  2. On 1995-99 models, install the instrument panel finish panel.
  3. On 1991-94 models, perform the following:
    1. Install the headlamp switch knob and shaft assembly by pushing the shaft into the switch until it locks into position.
    2. On the Explorer, install the rear window wiper and heated backlite switch assembly.
    3. On the Ranger, install the storage bin.
    4. Install the finish panel and the ash tray assembly.
  4. Connect the battery ground cable, and check the operation of the headlight switch.

Nov 29, 2008 | 1998 Ford Explorer

1 Answer

How do I replace the headlight switch in a 1985 ford f150 xlt


  1. Disconnect the battery ground cable.
  2. Depending on the year and model remove the wiper/washer and fog lamp switch knob if they will interfere with the headlight switch knob removal. Check the switch body (behind dash, see Step 3) for a release button. Press in on the button and remove the knob and shaft assembly. If not equipped with a release button, a hook tool may be necessary for knob removal.
  3. Remove the steering column shrouds and cluster panel finish panel if they interfere with the required clearance for working behind the dash.
  4. Unscrew the switch mounting nut from the front of the dash. Remove the switch from the back of the dash and disconnect the wiring harness.
  5. Install in reverse order.
Good luck.....

Nov 11, 2008 | 1985 Ford F150

3 Answers

Headlights won't work!


I had a problem like that on a Mercury Sable and it turned out to be the Multi-Function Switch. This was the whole assembly for the turn signals, hi/low beam switch, and wipers (I think). You have to remove it to test it to see if it is bad. Check out the Auto Zone web site to see if they have the test and replacement procedure. Thay may even do it in the store for you.

Jul 18, 2008 | 2004 Dodge Stratus

Not finding what you are looking for?
2002 Dodge Durango Logo

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...