Question about Dodge Intrepid
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: dodge magnum gear shift
I had the same problem. The interlock was not the problem. I had the shifter replaced (at my own expense because drive train warranty would not cover). After examining the old shifter discovered source of problem is a plastic cam on the front of ths shifter. A tiny PLASTIC ear which connects to a small spring had broken off. I repaired this by putting in a small screw where the ear had been. Incidentally, my tow truck driver had also seen the same problem on several Chrysler 300s. In my estimation this is a poor design on Chrysler's part.
Posted on Aug 20, 2008
two issues here. this may be a low fluid issue. i would check the level of the fluid first. the next issue could be a blown shift solenoid. these are located inside of the transmission pan.also, check the filter as well.(transmission filter could be clogged)
Posted on Mar 16, 2009
Sounds like the shifter linkage needs adjusted. There is a neutral saftey switch that prevents the car from being started in any foward or reverse gear. If the shifter linkage is out of adjustment, the neutral safety switch will give you starting problems.
Posted on Apr 11, 2009
SOURCE: 2002 dodge ram 2500 diesel
When your truck is shifting like you mentioned you need to check the battery cables. Better yet just replace the cables. Even a small amount of corrosion can cause a break down in the flow of current to the trans computer and cause erratic shifting. New cables should fix you right up. If this does not take care you need to start looking into "noise" from the alternator wire or other electrical interferrence. Another possible solution is to install a Hapi Box which clears interferrence in the wire from the TPS to the trans computer. It worked on my '02 until the cables corroded. I stripped back about 6" and found a mess in there. Good luck. (oh, Dodge will seel you a new trans to fix this problem. Be ware.)
Posted on May 23, 2009
Tips for a great answer:
Jun 10, 2013 | Cars & Trucks
Feb 25, 2012 | 2004 Dodge Intrepid
Nov 24, 2011 | 1996 Dodge Intrepid
Jan 01, 2011 | 1995 Dodge Intrepid
Jun 29, 2010 | 1995 Dodge Intrepid
Mar 15, 2009 | 1995 Dodge Intrepid
27 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: