At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi, if an engine cranks but refuses to start, it lacks ignition, fuel or compression.
When the engine cranks normally but won't start, you need to check ignition, fuel and compression.
Ignition is easy enough to check with a spark tester or by positioning a plug wire near a good ground. No spark? The most likely causes would be a failed ignition module, distributor pickup or crankshaft position (CKP) sensor.
It is hard to say with the info posted, it could be related to a number of issues. If you have verified that there is no spark to the spark plugs, it could be the CPS (crankshaft position sensor)
Hello! The DTC P0016 inidicates a cranskshaft and camshaft misalignment. If you only replaced the camshaft position sensor - you may need to replace the crankshaft position sensor - which is located at the top where the engine and transmission connect.
Hope this helps and good luck! Thanks for using FixYa!
×