Question about Cars & Trucks

Open Question

2004 a160 engine light on following F on the gear display. Delay when selecting a forward gear. How do we fix this?

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why do the headlights. Come on when any door is opened on my 2008 trailblazer


The Headlamps On at Exit and Perimeter Lighting modes can be adjusted using the steering wheel controls to select the wanted function as displayed in the driver information center. The Headlamps On at Exit selection will allow the driver to customize the period of time that the headlamps remain illuminated upon exiting the vehicle. This period can be adjusted from 0 seconds to 180 seconds. The Perimeter Lighting feature allows the driver to select if they want the headlamps and backup lamps to illuminate when the door UNLOCK button on the key fob is activated. This feature can be turned ON or OFF by using the driver information center steering wheel control buttons.
programming Features with the Driver Information Center (DIC)
To enter programming with the driver information center (DIC), perform the following actions:
Turn the ignition to RUN.
Place the vehicle in PARK.
Press the Personalization button on the steering wheel to enter personalization programming.
Automatic Door Locks
Continue with the following steps in order to personalize the automatic door locks:
Press the Select button in order to enter the menu. The first choice seen is the current setting.
Press the Select button in order to scroll through the following options:
• LOCK DOORS: IN GEAR
• LOCK DOORS: WITH SPEED
Press the Personalization button in order to advance to the next option.
Press the Select button in order to enter the menu. The first choice seen is the current setting.
Press the Select button in order to scroll through the following options:
• UNLOCK DRIVER: IN PARK
• UNLOCK DOORS: IN PARK
• UNLOCK DOORS: AT KEY OUT
• UNLOCK DOORS: MANUALLY
Press the Personalization button in order to advance to the next option.
Remote Activation Verification
Continue with the following steps in order to personalize the remote activation verification feature:
Press the Select button in order to enter the menu. The first choice seen is the current setting.
Press the Select button in order to scroll through the following options:
• LOCK FEEDBACK: BOTH
• LOCK FEEDBACK: OFF
• LOCK FEEDBACK: HORN
• LOCK FEEDBACK: LAMPS
Press the Personalization button in order to advance to the next option.
Press the Select button in order to enter the menu. The first choice seen is the current setting.
Press the Select button in order to scroll through the following options:
• UNLOCK FEEDBACK: BOTH
• UNLOCK FEEDBACK: OFF
• UNLOCK FEEDBACK: HORN
• UNLOCK FEEDBACK: LAMPS
Press the Personalization button in order to advance to the next option.
Delayed Lighting
Continue with the following steps in order to personalize the delayed lighting feature:
Press the Select button in order to enter the menu. The first choice seen is the current setting.
Press the Select button in order to scroll through the following options:
• HEADLAMP DELAY: 10 SEC
• HEADLAMP DELAY: 20 SEC
• HEADLAMP DELAY: 40 SEC
• HEADLAMP DELAY: 1 MIN
• HEADLAMP DELAY: 2 MIN
• HEADLAMP DELAY: 3 MIN
• HEADLAMP DELAY: OFF
Press the Personalization button in order to advance to the next option.
Perimeter Lighting
Continue with the following steps in order to personalize the perimeter lighting:
Press the Select button in order to enter the menu. The first choice seen is the current setting.
Press the Select button in order to scroll through the following options:
• PERIMETER LIGHTS: OFF
• PERIMETER LIGHTS: ON
Press the Personalization button in order to advance to the next option.

Mar 13, 2017 | 2008 Chevrolet Trailblazer

1 Answer

How do i reset my manint req's light after an oil change on a 2003 Honda pilot


Reset oil service light Honda Pilot. From years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.
How do you reset oil service light Honda Pilot. From years: 2003, 2004, 2005.
  1. Turn off the engine. Press and hold the SELECT/RESET button in the instrument panel and turn the ignition switch to run (one position before starting).
  2. Hold the button for at least 10 seconds, until the indicator resets.
  3. Turn the ignition off and then start the engine to verify the indicator has been reset.
How to reset oil service light Honda Pilot. From years: 2006, 2007, 2008, 2009, 2010, 2011, 2012.
Resetting the Engine Oil Life Display if maintenance service is done by someone other than your dealer, reset the maintenance minder as
follows:
  1. Turn the ignition switch to the ON (II) position.
  2. Press the select/reset knob repeatedly until the engine oil life is displayed.
  3. Press the select/reset knob for about 10 seconds. The engine oil life and the maintenance item code(s) will blink.
  4. Press the select/reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
All information is taken from the Honda Pilot owners manual.

Mar 09, 2015 | 2003 Honda Pilot

1 Answer

2003 Chevy Avalanche won't start (incorrect gear indicator)


PRNDL Display
The instrument panel cluster (IPC) displays the selected gear position as determined by the powertrain control module (PCM). The IPC receives a class 2 message from the PCM indicating the gear position. The PRNDL display blanks if:
• The PCM detects a malfunction in the transmission range switch circuit.
• The IPC receives a class 2 message indicating the park position and the column park switch indicates a position other than park, open input.
• The IPC detects a loss of class 2 communications with the PCM.

Could be the transmission range sensor . Testing would need to be done , hooking up a scan tool ! Doing electrical testing etc...

Jul 06, 2017 | 2003 Chevrolet Avalanche

2 Answers

How to Set Time on Mercedes-Benz A160


To set your time on an A160 follow the instructions below or follow the link to watch instruction video. http://youtu.be/nU3wtQ8A7Gc

How to Set Time on Mercedes-Benz A160

Adjusting the time:
Hold the time button pressed until the hour display flashes.
Adjust hours forward with the + button.
Adjust time backward with the - button.
Press the time button briefly. The minute will display will flash.
Adjust hours forward with the + button.
Adjust time backward with the - button.
Press the time button briefly and the newly set time is stored.

Jul 06, 2012 | Cars & Trucks

3 Answers

I changed the gear box of my 2007 corolla about 5 months ago. Then I noticed the car jerks or kind of pushes forward whenever i change my gear from park/neutral to drive or reverse. Please what do you...


A delay of more than a second in shifting from the neutral to drive or reverse gear, could mean that there is a problem with the transmission. If on changing from a neutral or park position to the drive or reverse gear, the car does not immediately catch the gear and move forward or backward, then it could mean a problem in the transmission. If you change gears, and you hear a sudden clunk or sudden jolt or shudder, then the shifting is not smooth and there could be a problem with the gearbox. If the engine rpm keeps increasing but there is no increase in the speed, then it could be a sign of the transmission slipping.Most automatic transmission systems, nowadays, have a check engine light or an OD light, which flashes if there is a problem with the engine.

Oct 01, 2011 | 2007 Toyota Corolla

2 Answers

Gud day.prob with a160 matic has wrench displayed on instrument panel.car is pre owned,no manual or spare key.ride is horrible,and i dont know if all a160 is 5 speed.


All the different lights you get on the dash of any vehicle, have
been there since 1980. That is 31 years. Nothing has changed
since then ,unless you were on another planet

Check for Codes
Diagnose System with OBD Malfunction
Repair system as necessary

Jul 28, 2011 | Mercedes-Benz B-Class Cars & Trucks

1 Answer

My 2004 audi s4 makes gronchy noise when i put it in to 2nd gear when cold whats causing it?


If I've understood your problem correctly.....when changing from 1st gear into second the box is giving a metal on metal crunching sound?
  • This would be the syncromesh ring which is not equalizing the speed correctly.
  • The problem usually happens when there is wear on the same part.
  • Check to make sure that the correct transmission fluid has been used in the box.
  • To alleviate the problem and delay the time when it will require attention, use the double de- clutch method of changing gears, especially when the transmission is cold.
  • The double de-clutch is carried out in the following way.
  1. When in gear and changing from 1st gear to 2nd, change into neutral and release the clutch and then depress again before selecting 2nd gear....It is not required to rev the engine in the neutral position when changing up....
  2. When changing down rev the engine when the shift lever is in neutral for each change.
You'll soon get the hang of it and stop the crunching sound, protecting the box at the same time....
Regards Johngee

Nov 13, 2010 | 2004 Audi S4

2 Answers

Need the spark plug gap for 2.5 03 altima


.039--.043
Different spark plug manufacturers may specify different gaps.

Jul 21, 2010 | 2003 Nissan Altima

1 Answer

Gear shifter for 40 h. p. mariner outboard


With your lower unit off have someone shift the engine into forward while watching the gear shift select shaft's rotation,let gearshift remain in forward,now place your lower unit in forward and reinstall. In the future just put engine in forward when installing a water pump as there won't be a need to move gearshift

Jul 23, 2009 | 2004 Mercury Mariner

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...