Question about Cars & Trucks

Open Question

Cat flap not responding - Cars & Trucks

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What could make d399 cat engine not to start when the battery is new

If it's cranking over fine with the new battery and will not start, then it isn't getting fuel. Check that power is connected to the fuel shutoff switch on the engine. You have to have power to this shutoff switch to open the fuel to the fuel rail and injectors. Otherwise, it will just crank and never start. AND if it has a blower on it, be sure the emergency shut off flap is open inside the blower. That is controlled by a locking lever on the flap outside the blower. If it's belching smoke and will not start, the flap is closed and it can't get any air. Open the flap to the lock position on the lever. Have fun with it Brother.

Jan 17, 2018 | Cars & Trucks

1 Answer

Nissan pathfinder 2006. The aceleration pedal not responding the truck don't go more the 20 miles per hour. I changed throttle posicion sensor, all relays,still not responding.

Cat converter in front of muffler is getting clogged up..Some people just replace it with a straight pipe but that can mess with your fuel sensor s...... I would check that first

Oct 05, 2017 | Nissan Cars & Trucks

2 Answers

How to get a spark plug out on a 2007 ford f150 that the outer shell has separated from the porcelain of the spark plug the plug has not broke just the threaded part has come out

magnet should be able to remover it, industrial type as they are stronger, you can get them from out of a honeywell cat flap. inside the cat collar part, or try a magnetic inspection stick, this should be able to get the spark plug out but you have to be gentle as it wont be a stronger magnet.

Aug 11, 2017 | Ford Cars & Trucks

1 Answer

Exterior doors with cat flap

I know there are stores that sell <a href="">doors in Calgary</a> that already have a cat flap. Try checking at a door store. Good luck!

Nov 07, 2013 | Cars & Trucks

1 Answer

What causes the 2002 ford focus to be lazy?

The main, common issue with the Focus was the intake manifold. It's made of plastic and is prone to cracking and it's inner butterfly flaps cracking off and entering the engine, causing issues and failure in extreme cases.
Also check the catalyst condition. I've had one focus with a meted down cat, which caused blockage in the exhaust system, dramatically reducing power.

Nov 16, 2012 | Cars & Trucks

2 Answers

What is cata system efficiency below threshold bank 1

Bank one cylinder catalytic is not performing in removing harmful emmissions

May 01, 2011 | 2005 Chevrolet Avalanche

1 Answer

I have 2005 GMC Envoy. I noticed the gas

The new design filler neck on newer gm vehicles don't have a flap. The flap was just to keep stuff from falling in. I've had problems with the fuel sending unit in the tank on these vehicles.

Jan 01, 2010 | 2005 GMC Envoy Xl

1 Answer

I have a 1994 GMC Sierra 1500 that has a repeated clapping noise under the pasenger side dash. This clapping happens when the key is first turned on and when the engine is shut off. It appears to be the...

i would check for CAT problem the material inside when is to old comes off en then is a big ball inside the CAT converter and when you start the vehicle the pressure push it agains the back end like trying to come out and when you shut it off release that pressure and then make it fall down on the bottom of you cat converter

Sep 24, 2009 | 2000 GMC New Sierra 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

79186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

13735 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides