Question about Ford Cars & Trucks

1 Answer

2007 Ford Explorer flasher relay

LOCATION and pictures

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 12,521 Answers

There is no flasher relay , all done electronically by the smart junction box (computer )
The smart junction box (SJB) monitors the multifunction switch position by sending multiple voltage reference signals to the multifunction switch. When the multifunction switch is in the LH or RH TURN positions, or the hazard lamp switch is engaged, that input signal is routed to ground.
When the SJB receives an input from the multifunction switch indicating a request for a turn signal or hazard lamps, the SJB then supplies voltage to the appropriate turn lamps.

Your best bet would be to take it to a qualified repair shop or dealer .
Do you know what DTC'S are ?
Smart Junction Box (SJB) Diagnostic Trouble Code (DTC) Chart DTC Description Action B1499 Lamp Turn Signal Left Circuit Failure Go To Pinpoint Test M . B1502 Lamp Turn Signal Left Circuit Short to Ground Go To Pinpoint Test M . B1503 Lamp Turn Signal Right Circuit Failure Go To Pinpoint Test M . B1506 Lamp Turn Signal Right Circuit Short to Ground Go To Pinpoint Test M . B2048 Left Rear Turn Lamp Circuit Short to Ground For Mountaineer, Go To Pinpoint Test M .
For Explorer or Explorer Sport Trac, REFER to Stoplamps in this section. B2049 Left Rear Turn Lamp Circuit Open For Mountaineer, Go To Pinpoint Test M .
For Explorer or Explorer Sport Trac, REFER to Stoplamps in this section. B2050 Right Rear Turn Lamp Circuit Short to Ground For Mountaineer, Go To Pinpoint Test M .
For Explorer or Explorer Sport Trac, REFER to Stoplamps in this section. B2051 Right Rear Turn Lamp Circuit Open For Mountaineer, Go To Pinpoint Test M .
For Explorer or Explorer Sport Trac, REFER to Stoplamps in this section. B2071 Hazard Switch Signal Short to Ground If the hazard lamps are inoperative, Go To Pinpoint Test N .
If the hazard lamps are always on, Go To Pinpoint Test O . B2281 Right Turn Switch Short to Ground Go To Pinpoint Test L . B2282 Left Turn Switch Short to Ground Go To Pinpoint Test L . All other DTCs - REFER to Section 419-10 .

Posted on Apr 22, 2017

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn signal harness 2002 ford ranger 14a320 diagram turn signal connector wire colors and ppin location


images for Turn signal harness 2002 ford ranger

Ford explorer turn sinal problem got fixed - YouTube

? 3:23
www.youtube.com/watch?v=I2SUGIvYAWc
Jul 12, 2013 - Uploaded by Raybob216 My 04 exployer left turn signal and break light not working fix loose wires behind ... bulb and come to find out wire had popped out of the harness. ... How to Change Ford Explorer 2002 Flasher Relay for Hyper Flasher Relay ... How To Install Replace Turn Signal Wiper High Beam Switch Ford Ranger 95-98 ...

Oct 07, 2015 | Ford Cars & Trucks

1 Answer

Location of fuel relay on 1998 Ford Explorer


Fuse box under hood drives side, here is a link showing a picture of the location.... https://www.google.com/search?site=&source=hp&ei=6hLrVIPuE8KwsAT0wYKIBg&q=Location+of+fuel+relay+on+1998+Ford+Explorer&oq=Location+of+fuel+relay+on+1998+Ford+Explorer&gs_l=mobile-gws-hp.3...4051.4051.0.6008.3.2.1.0.0.0.191.191.0j1.1.0.ehm_loc...0...1c..62.mobile-gws-hp..2.1.70.3.c1UaKdzX4T8#imgrc=IKB6R6WAkxRtcM%253A%3Bundefined%3Bhttp%253A%252F%252Fwww.blackreefdesigns.com%252Fmisc%252Ffuelrelay.JPG%3Bhttp%253A%252F%252Fwww.explorerforum.com%252Fforums%252Fshowthread.php%253Ft%253D255817%3B819%3B614

Feb 23, 2015 | 1998 Ford Explorer

1 Answer

1998 FORD EXPLORER TURN SIGNAL RELAY LOCATION WHERE IS THE RELAY LOCATED?


For 1998 Ford Truck Explorer 4WD 4.0L EFI 6cyl the Flasher is located front seating area, driver side, behind dash, mounted on steering column.

Hope this helps (remember to rate and comment this answer).

Aug 29, 2011 | 1998 Ford Explorer

1 Answer

Where is the location of the turn signal flasher on a 1995 Ford Explorer? The manual does not mention it.


Ford Explorer's utilize a Multifunction Switch on the turn signal stalk, but the flasher relay location depends on the year. Either under the steering column (remove lower plastic shroud) or under hood with other fuses, links, and relays, inside a rectangular plastic enclosure). If you've bought the new relay, you'll know what you're looking for.
I have the same year and model, and my flasher is yellow with square-like a relay and extra extended cover, under dash to the left of the steering wheel, fastened with clip to lower upper hidden edge just below your knees.

I was reading that the yellow flasher/relay is for Explorers with a tow package, got to looking around at the electrical on the towing and it was all corroded by the plug in end on the rear of the 1995 eddie bauer explorer, removed it, cut wires off and taped up, tucked up in bumber, replaced fuse in fuse box leftest row, one about 4rth or 5th down blue in color was blown, everything works great now.

Hope this helps (remember to rate and comment this answer).

Aug 04, 2011 | 1995 Ford Explorer

1 Answer

Flasher relay located in a 1998 ford explorer


flasher relay is in the #10 location (7.5A fuse), also #21 location (15A fuse) in the power distribution box that is under the hood.

Dec 26, 2009 | 1998 Ford Explorer

1 Answer

Need location signal flaher and front lighter fuse,;2002 explorer


check fuse #21 first. 5 amp.

flasher relay in fuse panel on dash


May 21, 2009 | 1998 Ford Explorer

2 Answers

Where is the flasher for the turn signals in a 1999 ford explorer


The 2 fuses are no 10 (7.5amp) and no 21(15amp) in the interior fuse panel.The flasher is located on the base of steering column under dash. See this this pic find connector c214 on bottom 3rd from right.
http://i253.photobucket.com/albums/hh43/chuck943/EXN15113.gif

Mar 14, 2009 | 1999 Ford Explorer

1 Answer

95 ford explorer, turn singal relay location


If you place the handle against your ear and the other end on each relay in turn, you will find it.

Apr 18, 2017 | 1995 Ford Explorer

1 Answer

Finding were it is


location of turn signal flasher 2005 Ford Explorer

Jun 30, 2008 | 1996 Nissan Altima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...