Question about Cars & Trucks

Open Question

Our Lime Pro equiptment D5.0 doesn't run the belt but the light is on

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have put 3 fuel pumps in my Ford EB all failed with in 2to3 days, can anybody shed any light on this

Use OEM pump. Check power (12+) and grounds (50milivolts or less), circuit loaded (running). Make sure there are no restrictions (plugged filter, crushed line) also check return line if equipted.

Jun 02, 2015 | Ford Cars & Trucks

1 Answer

Seat belt light doesn't turn off even when the car is turned off.

You have either a short to ground on the black/white wire going to the seat belt switch or you have a bad body control module. Disconnect connector C3 at the body control module and check for good ground with the seat belt UNBUCKLED. If you see that, it's the BCM

Dec 06, 2017 | 1998 Chevrolet Camaro

1 Answer

Belt routing diagram for 1984 Chevy G20 van 5.0 with multiple belts

first is alternator/ water pump/ crank... second is power steering and smog if equipted.. last is ac compressor..

Feb 24, 2013 | Cars & Trucks

1 Answer

In my 2007 Hyundai Accent, the seat belt light won't stop flashing and alarm won't stop ringing even when seat belt is buckled.

Check the belt latch,(the short belt you click in and push button to release). It has a sensor in it. Tap and shake it as it may have a foreign object in it. Look under the seat for the connector(s), and make sure they are pushed in all the way and that the wires aren't damaged. If that doesn't help, try disconnecting the connector. If the light and alarm are still on have two choices. First, replace that part of the belt. Or, try running a jumper wire across the two contacts in the connector but I cant tell you that!!

Aug 27, 2011 | Hyundai Accent Cars & Trucks

2 Answers

New Fan Clutch, Water Pump and Belt replaced two weeks ago. Today belt shreded along midline leaving 1/2 of the belt in place. All parts new general motrs equiptment.

check your pully alighnment look down the sides the frontof the pulleys should be in line if they are check for a bad bearig on all of atachments if all ok the belt may have jumped on one of them causing the belt to cut .

Mar 08, 2011 | Chevrolet Silverado 2500HD Cars & Trucks

1 Answer

My serpentine belt fell off and i need a diagram to look at

Generally there should be a decal affixed to your car under the hood. It will show a scketch of the belt routing. It is a standard equipt decal installed when the car was built. It maybe on the inner hood or somewhere sticking to the inner skirt or radiator cover in the engines compartment

Apr 18, 2010 | 1995 Nissan Maxima

1 Answer

I would like a diagram on the belts for 84 regal

If your vehicle is equipt with a serpentine belt, there should be a black sticker upon the radiator support with the routing diagram written in white.

Feb 14, 2010 | 1984 Buick Regal

1 Answer

2000 hyundai elantra replaces all the belt ,but power steering changer belt 3 times and still makes nosie

dear friend-if your model came with a multy v belt(pk)then the power steering pump is equipt with a alluminuim pulley,should this be then the belt inbeds into the pulley to deep,replace or file down.

Jun 30, 2009 | 2000 Hyundai Elantra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

80417 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

15314 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides