Question about Holden Cars & Trucks

Open Question

Power console with radio / air conditioner controls cuts in and out at random intervals also can not turn traction control on or off

Make Holden Commodore Omega VE 2008

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 3 Answers

SOURCE: 2003 Infiniti G35. Radio turns off, air conditioner full blast.

That happen to me too i just fixed last week
the thing is that you have to change the fuse in infiniti there is 3 place of fuses first one is inside the car, Second one is infront of the battery and the third one is next to the battery so for the radio and A/C one is the infront of the battery open and change the fuse number 15 that will be fixed...

Thank You

Rahim Faiz

Posted on Oct 27, 2009

Ad
peterrance19
  • 399 Answers

SOURCE: I am getting random warning for traction control.

hi hope i can help the traction control is controled by signals from the abs system if you lose a sensor imput the abs light will also come it looks like you have a sensor on the blink hope you find this helpful if so please give it a rating thanks pete

Posted on Nov 24, 2009

  • 84 Answers

SOURCE: ABS & traction control just went out on 2008 Ford Escape.

Chances are it is a bad ABS sensor. Need to get scanned to know for sure and which one.
Not much i know but I hope that helps.

Posted on Feb 03, 2010

  • 1 Answer

SOURCE: How to Turn off Service Traction Control and ESC messages

I had this problem with my 2007 HHR. I drove away with the service engine and the service traction light on. The car was stuttering through the gears. I took it back and they checked it. They disconnect some wires while they change the oil and one was loose. The service engine turned off but the service traction stayed on. We disconnected the battery for 3 minutes and it fixed the problem. Some of those other guys spent up to 300 dollars to fix the problem. Hope it works out for you.

Posted on Oct 01, 2010

tunde007
  • 2382 Answers

SOURCE: ESP/BAS warning light on. went

Hi, these systems are all linked together. Most commonly, one of the wheel speed sensors is not reading or is reading incorrectly. This can also occur on slippery surfaces where one or more wheel slides enough to cause the sensor to drop the signal, but not enough to meet criteria for an abs or esp episode. If the light comes back every time you turn on the ignition, there is a deeper problem.
The system has detected a fault in the electronic stability program - brake assist system. You have an electrical connection at the rear wheels secured to the inside of the brake area and are viewable from under the vehicle. It is a small wire harness running to each wheel. Grab the connector and wiggle it around, and make sure they are tight. Due to the connector being mounted low to the ground, sometimes they become dirty or corroded, not making contact. Do this on both sides and see if the lights turn off.

If the light does not turn off, you have to replace dynamics sensor, which is mounted UNDERNEATH the center console in the car. There is a "lost communication to dynamics sensor" and "low voltage to dynamics sensor supply"..

Posted on Feb 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

New holden cruze orange light with the letters tc on dash what does that mean


Do you have a hand book for the vehicle this will be explained in more detail. TC = traction control this is to do with your braking sytem. You may have a switch for this normaly down by the gear change or on dash by stearing wheel normaly on right side of stearing wheel. If you locate switch turn it on and off if this either turns light on or off all should be ok turn traction control on and leave it on, if light stays on in either possition of switch take to a holden dealer as there will be an issue. probably a front wheel speed sensor playing up but please get it fixed as it is a very important safety issue. good luck.

Mar 03, 2017 | Holden Cars & Trucks

1 Answer

Traction control lights come on dash in Holden Captiva 2010 diesel lack of power


when the traction control is activated , there is a reduction of power from the engine to compensate for that lost traction control
run the fault codes , repair the reason for the traction control light and then reset the computer using a scan tool and the engine power will return

May 13, 2015 | Holden Cars & Trucks

1 Answer

Holden epica electronic stability program light appears on dash were a re the sensors and likely problems that would cause the dash light error code to comeon please


Traction control is with the wheel sensors. A bad sensor, bad bearing, or bad wiring. ABS is also controlled by these. Code readers don't read ABS and Traction control. Get the vehicle on a scanner....

Dec 04, 2014 | Holden Cars & Trucks

1 Answer

2003 mustang when traction control light comes on the car lose power almost like shutting down, when it goes off it pick up speed.


The traction control system DOES cut your engine power when the tires spin. That is by design. The system cuts engine power to stop the wheels spinning and restores power once the wheels regain traction. It feels odd when the tires spin and power cuts out. It's good practice to lift off the accelerator when the system kicks in. Otherwise, if you are on gravel or slick streets the tires may spin, stop when traction control kicks in, and then spin again when power is restored. It is not an "elegant" solution but it does work for the most part.

Apr 03, 2014 | 2003 Ford Mustang

1 Answer

Traction Control deactivation light came on


it would hurt to get it checked .
rather be safe than sorry

Feb 04, 2014 | Holden Cars & Trucks

3 Answers

98 mazda millenia traction control keeps turning on and the engine cuts off randomly


The traction control system senses wheel spin from either drive wheel. Excessive spin sensed by the ABS sensor will force the wheel that is spinning to brake to avoid loss of traction. You could have a faulty ABS sensor (wheel speed sensor) As far as the engine "cutting off" Do you mean that it shuts off completely or you cannot accelerate?

Jul 28, 2011 | 1998 Mazda Millenia

1 Answer

I have cleand and change the maf flow and my car still stalls and cuts off the air flow ant wright and it want smooth out tillget over 55 60 miles on inerstate what can i do to fix the problem plus the car...


Hello, This sounds like a Traction control box problem. When you put in the MAF do you remember a pod on the Air duct around the Air filter? In the ductwork it looks like a butterfly valve (the humming) and it is part of the Traction control system. What happens on a Ford product is the Traction control reduces engine power by choking off air going into the engine as well as applying rear braking.

The Traction control has a speed range and it shuts off at higher speeds. This is probably why the problem disappears the faster you go. To fix this problem, you need to clean the ABS sensors in each wheel. The Ford rear Rotors have an Emergency brake setup inside the hub of the rear Rotors. There is a drum brake in each rear wheel inside the Rotor. When the brake lining and rust fall off the Emergency brake shoes, it blinds the ABS sensors. When the ABS can not count the wheel turns, it activates the Traction control. When the ABS sensors can see again, the noises and power problems should go away.

Also, for better acceleration, some of the old style Intake manifolds were metal and clogged up under the Airhorn. There are 8 bolts and 1 $10 gasket needed to clean out the groove under the Airhorn gasket. This will give your engine more pep.

I hope my solution is very helpful in explaining how to fix your car.

Jun 15, 2011 | 1996 Ford Crown Victoria

1 Answer

Radio in the cars turns off and back on.


Radio: K134A Multifunction relay module under $100 at the stealership.

Speedo and traction control; check wheel sensors all 4, clean and blow the sensors and reactor rings.
Is ABS light on as well? if so, you need a EBTCM module mounted to the brake ABS pump facing the battery. There are palce in the US that rebuild them with warranty for under $150.

May 16, 2010 | 1999 Cadillac Catera

3 Answers

2003 Infiniti G35. Radio turns off, air conditioner full blast.


That happen to me too i just fixed last week
the thing is that you have to change the fuse in infiniti there is 3 place of fuses first one is inside the car, Second one is infront of the battery and the third one is next to the battery so for the radio and A/C one is the infront of the battery open and change the fuse number 15 that will be fixed...

Thank You

Rahim Faiz

Aug 23, 2009 | 2005 Infiniti G35

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Holden Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14384 Answers

Are you a Holden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...