Question about Cars & Trucks

1 Answer

Remove and replace lug bolts on my 2001odysey without removing hub

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 44,599 Answers

Remove the drum or brake disc
use a tool like a ball joint remover clamp to push the broken stud out of the hub
fit the new hud stud and pull it into place
of course it is more professional and quicker to do it with the hub off

Posted on Apr 21, 2017

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Remove and replace lug bolts on my 2001odysey


Jason, im guessing you old ones are either broken or stripped. It will really depend on how long the bolts are.
You can take a punch and hammer, drive out the old ones. If the new ones aren't to long you can slip the new ones in from the back of the hub.
If you are able to slip them in, you can place one of the lug nuts on the stud ( backwards) and proceed to tighten the lug nut until the new bolt completely seats against the hub.
The reason you place the lug nuts backwards is so you don't damage the chamfer,tapered end of the lug nut.

Get back to me if you have any other questions, Robert

Apr 21, 2017 | 2001 Honda Odyssey

1 Answer

Wheel stud removal honda odyssey


I am currently doing the front driver side. If you have the big center nut without a cotter pin, I would suggest you have a shop do it. There is no way to remove and install lug bolts on this particular vehicle without removing the hub, and this hub SUCKS to remove. Here is what I did, and NO, I do not recommend doing it this way. Remove wheel and brake caliper assy. Suspend brake to keep weight off the brake line. Remove two philips head screws holding rotor to hub. These screws can be frozer tight. I used an impact type screwdriver to remove these. Remove the large nut..lmao...sounds easy. This nut is 36mm but i got away with using a 1-7/16 6 sided impact socket with a 1inch impact wrench. A huge breaker bar would work as well. I imagine the foot pounds to be astronomical and I doubt most saturday mechs will have the tools to remove it. Put the rotor back on, but backwards. Use a couple of lug nuts to bolt it to the hub. There is enough left of the broken lugs to use them. I then took a typical harmonic balance removal tool and utilized the two holes that had the philips head screws. Using the spindle as my center, I applied pressure to the spindle, causing it to retreat back into the hole. When the pressure got decent, I took two small pry type tools and put them between the back of the hub and fixed piece, probably called a steering knuckle or something. Kept wiggling and prying little by little...added a little more balancer pressure...more prying...it works it way out..finally. I believe the manual says to use a large slide hammer system to remove the hub. Wish I had one. Hammer out the old studs, press in the new. You can also using open lug nuts to pull the studs flush. Just make sure the splines are lined up. Assy is much much easier.

Jan 08, 2012 | 2002 Honda Odyssey

3 Answers

Need to get a wheel lug stud out of the wheel hub. there not enought room to pound it out from the another side it seems to me you have to remove the whole hub? yes or no.?


Dont remove the hub! Usually you can rotate the hub and find a spot that the stud will come out.Other option is to saw off and inch or so of the stud before you remove it.Then knock it out.Good luck!

Apr 20, 2011 | 1998 Chevrolet Monte Carlo

1 Answer

Is it possible to replace broken lug bolts without removing the hub on a 95 protege


In the rear you have to remove the brake drums, on the front you must remove the roter. but they will knock right out with a hammer

Apr 04, 2011 | 1995 Mazda Protege

1 Answer

How do i change my rear hubs


Loosen the rear lug nuts, jack up the car, remove the rear wheels, remove the brake drums, remove the brake shoes and hardware, remove the 4 bolts holding the hubs in. Bolt in the new hubs, reassemble the brake shoes and hard ware, put the brake drums on, put the wheels on and snug the lug nuts, lower the car, tighten the lug nuts.

Apr 27, 2010 | 1996 Saturn SL

2 Answers

I have a 95 Chevy suburban and I am trying to change the rotor and can not get it off. The lugs are attached to the rotor and not sure what I should do


Removing: Loosen lug nuts (7/8") and spindle nut (36mm). Lift truck. Remove lug nuts, spindle nut, and wheel. Remove 2 bolts (3/8" allen) holding calipers on. Hold the calipers up with a bungee cord. I attached it to the sheet metal of the fender. Remove 4 bolts (15mm) from rear of hubs. Once these bolts are removed you can move the shield that is in-between the hub and the axle(I think). You are moving it to get access to the allen bolt that holds the ABS sensor on. Once you move the shield then you can look through the top of the rotor through the slots and see the sensor line and bolt. I don't remember what size allen this one took. You do need a long allen wrench though. Disconnect sensing line from hub. Now the rotor is ready to come off. I had to use a pry bar to remove this gently working each side until it popped off. Once the rotor is removed, you need to hammer out the lug bolts. Then you have to tap the rotor away from the hub. This took a little work. Then check each of the lug bolts by screwing the lug nuts on them. They should go all the way down by hand. If they don't - go buy new bolts $2 a piece. Installing: Position new rotor on hub. Get some dry ice from your local grocery store and freeze the bolts for about 10 minutes. Pull one bolt out of the ice at a time and install on the rotor and tighten the bolt with the lug nut. I put the nuts on upside down and used a 7/8" wrench and mallet to tap on the wrench to get these as tight as possible. You also have to tap on the head of the bolt and repeat the wrench tapping. Do this for each bolt pulling one out of the ice at a time. You do not have to get the rotor and hub completely together but get it as close together as possible. Once all of the lug bolts are in it is time to put the rotor on the truck. Ensure the shield is on the spindle and install the rotor, again, this takes some work. Once the rotor is on, connect the ABS sensing line. Line up the shield and install 4 bolts to rear of hub. You can align these by moving the hub, not the rotor. Install the caliper, remember to put brake grease on these 2 bolts. You may have to compress the caliper slightly. To do this remove the brake pad that has the circular part of the caliper touching it. Open the brake fill cap on the master cylinder. Use a C-clamp to compress the circular part. Reinstall the brake pad and brake fill cap. Install the caliper. Install the wheel and tighten lug nuts. I used a cheater bar on my tire iron and ensured that the lug bolts were flush with the head of the lug nuts. Then I removed the wheel to verify that the gap between the rotor and the hub was gone. Reinstall wheel, tighten lug nuts, and tighten spindle nut. Once both brakes have been replaced, start up the truck and pump the brakes several times till you feel some tension when pressing them.

Nov 25, 2009 | 2000 Dodge Durango

1 Answer

How to replace lug studs on 2002 chrysler town


I'll try to help you. If you are having trouble with 3 out of 5 studs on one wheel you may want to go to an autoparts store or Salvage yard to look at the whole hub. Usually a press is used to remove the bolts so you would be taking off the hub anyway. When you pay for 3 bolts and labor you may be better off in a Salvage yard or parts place for a different hub. The rear hub on front wheel drive cars is like a trailer axle. Much simpler to remove mounting bolts and press in new bolt. But if rear has differential(rear wheel drive) it has an axle shaft. Would be easier to grind and drill out broken stud on car. You can draw new bolt into place by placing bolt through a socket and use the wheel nut to draw the bolt into the hub.

Jul 08, 2009 | 2009 Chrysler Town and Country

2 Answers

Cant remove wheel hub


here is procedure

Section 04-01: Suspension and Wheel Hubs, Front 1996 Taurus, Sable Workshop Manual
REMOVAL AND INSTALLATION Wheel Hub Bolt Removal
  1. Raise vehicle on hoist.
  1. Remove wheel and tire assembly. Refer to Section 04-04 .
  1. Remove disc brake caliper (2B120), and front disc brake rotor (1125). Refer to Section 06-03 .
Brake Shoe and Lining Removal
  1. Remove brake master cylinder filler cap (2162). Check fluid level in brake master cylinder reservoir (2K478). Remove brake fluid until brake master cylinder reservoir is half full. Discard removed fluid.
  1. Raise vehicle on hoist. Refer to Section 00-02 .
  1. Remove wheel and tire assembly from front disc brake rotor mounting face. Use care to avoid damage or interference with disc brake caliper (2B120), front disc brake rotor shield (2K004) or front wheel knuckle (3K185).
  1. Remove rear brake pin retainers (2N386). ( I think it is a T 40 torx bit you need)
  1. NOTE: It is not necessary to disconnect hydraulic connections.

    Lift disc brake caliper from front disc brake caliper anchor plate (2B292) and front disc brake rotor (1125). Do not pry directly against metal caliper piston or damage will occur.
  1. Position disc brake caliper out of the way and support with wire to avoid damaging the disc brake caliper and front brake hose (2078).
  1. Remove outer brake shoe and lining (2001) assembly from front disc brake caliper anchor plate.
  1. Remove inner brake shoe and lining assembly.
  1. Position lug bolt (1107) to clear front wheel knuckle (3K185).
  1. Remove lug bolt from wheel hub (1104).



7548d8f.gif

Installation
  1. Install lug bolt into wheel hub.
  1. Using a lug nut (1012), seat wheel hub bolt into wheel hub.
  1. Install front disc brake rotor and disc brake caliper. Refer to Section 06-03 .
  1. Install wheel and tire assembly. Tighten lug nut to 115-142Nm (85-104 lb-ft).

May 25, 2009 | 1996 Mercury Sable

1 Answer

Audi a4 2.8 1995 model


  1. Remove the hubcap or center cap.
  2. Loosen but do not remove the hex collar bolt.
  3. Loosen but do not remove the wheel lug bolts.
  4. Raise and safely support the vehicle.
  5. Loosen all, and remove all but one of the CV joint to stub axle bolts retaining the halfshaft to the transaxle flange. If necessary have an assistant hold the tire, or remove the tire, install two of the lug bolts and have an assistant hold a suitable and sturdy 3 foot (1 meter) prytool between the lug bolts to prevent the axle from spinning.
  6. If not previously removed, remove the front wheels.
  7. Remove the remaining CV joint to stub axle bolt and remove the halfshaft from the transaxle drive flange and support it out of the way. Do NOT let it hang unsupported.
  8. Remove the outer axle hex collar bolt and press the halfshaft out of the hub. A suitable press tool may be necessary, otherwise drive the axle out using a suitable drift.
  9. Remove the ABS wheel speed sensor cable from the brake caliper bracket.
  10. Slide the ABS speed sensor partly out of its mount.
  11. Remove upper control arm pinch bolt and nut, then remove both arms up and out of the steering knuckle.


WARNING The slots in the steering knuckle must not be widened. Do NOT loosen any other steering knuckle fasteners, otherwise the axle geometry must be checked.
  1. Tilt the steering knuckle out and to the rear of the vehicle, then remove the halfshaft. If necessary, use a press tool to remove the axle from the hub.



0900c152800c2fa3.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. A threaded plastic guide dowel is included in the vehicle's tool kit. Thread it into place to guide the wheel on the ground
Fig. Apply a light coating of an anti-seizing compound to the lug bolts


Fig. The screwdriver handle supplied in the vehicle's tool kit is used to start the lug bolts
Fig. Always loosen or tighten the axle nut or bolt with the vehicle on the ground
  1. Install the halfshaft into the wheel hub.
  2. Install the upper control arms into the steering knuckle and tighten to:
  3. Upper steering knuckle pinch bolt: 30 ft. lbs. (40 Nm).
  4. Install the wheel and hold it to keep the axle from turning. If necessary have an assistant hold the tire, or with the wheel removed, install two of the lug bolts and have an assistant hold a suitable and sturdy 3 foot (1 meter) prytool between the lug bolts to prevent the axle from spinning.
  5. Attach the inner halfshaft-to-transaxle flange and tighten to:

Inner CV joint-to-transaxle flange:


M8 fasteners: 30 ft. lbs. (40 Nm) M10 fasteners: 59 ft. lbs. (80 Nm)
  1. install the ABS wheel speed sensor, and the sensor cable into the caliper bracket.
  2. If not previously installed, install the wheel without the wheel trim and do not fully tighten the lug bolts.
  3. With the wheels installed and the vehicle on the ground, tighten the lug bolts in a crisscross pattern and then the axle bolt as follows:
  4. Wheel lug bolts: 89 ft. lbs. (120 Nm)

Apr 11, 2009 | 1996 Audi A4

1 Answer

1990 Sentra How it remove and replace lug studs on front wheel


there is a large nut that holds that hub on. Remove the cotter pin and the cap from the bolt... remove the bolt and the hub comes off.

Robert

Feb 27, 2009 | 1990 Nissan Sentra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...