Question about Cars & Trucks

1 Answer

How do you lower the basket? I can't get the handle to disengage or lower the basket!

Posted by on

  • Brett Duxbury
    Brett Duxbury Apr 21, 2017

    Hi Betty Marr, I want to help you with your question, but I need more information from you. Can you please add details in the comment box?
    type of device ? make and model number ?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Cars & Trucks Master
  • 923 Answers

How do you lower the basket? Are you trying to cook french fries at a fast food restaurant? If so, you SHOULD have been instructed before you were ever expected to actually perform the task! DON'T splatter hot oil on yourself, nor on others!

If that is not the kind of basket you are talking about, how would anyone who was trying to help you, know that, by your question?

Posted on Apr 21, 2017

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace the tailgate latch on 2005 avalanche


Welcome to FixYa.com



Latch Replacement - Endgate
Removal Procedure
1. Lowerthe endgate.
2. Loosen the handle bolts.
3. Raise the endgate.
Image
4. Remove the handle bezel by prying gently on the upper retainer tabs.
ImageJ
5. Disengage the linkage rods (1).
Image 1
6. Lower and support the endgate.
1. Remove the cables from the side panel cable retainer bolts.
lmag7
8. Remove the bolt holding the latch assembly.
l_1m a gj
9. Disengage the linkage rod from the latch assembly.
10. Remove the latch assembly from the endgate.
Installation Procedure
L Image
1. Engage the linkage rod to the latch assembly.
2. Install the latch assembly to the vehicle.
Image I
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the latch assembly bolts.
Tighten the bolts to 25 N.m [18 Ib if).
Image I
4. Connect the cables on each side of the endgate to the side panel cable retainer bolts.
Image 1
5. Engage the linkage rods (1J.
6. Raise the endgate.
7. Install the endgate handle bezel. Pressing into place until fully seated.
8. Tighten the handle bolts.
Tiqhten the bolts to 25 N.m 118 lb ftl.



Thank you for Using FixYa.com

Kind Regards, Lee

Your FixYa Expert and Master Technician

Jan 31, 2011 | 2005 Chevrolet Avalanche

1 Answer

The left rear door window fell off the track. How do I remove the door panel to access it.


This is the complete procedure you stop when you see the problem.



1. REMOVE REAR DOOR INSIDE HANDLE BEZEL


(a) Remove the screw.


(b) Using a screwdriver with its tip taped, disengage the 2 claws A.


(c) Pull out the the rear door inside handle bezel in the direction indicated by the arrow, disengage the claw B, and remove the rear door inside handle bezel.


2. REMOVE DOOR PULL HANDLE


(a) Using a screwdriver wrapped with the protective tape, disengage the 2 clips and remove the door pull handle.


3. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY


(a) Remove the screw.


(b) Disengage the 7 clips.


(c) Disconnect the connector and pull up on the rear door trim board sub-assembly to remove it.


4. REMOVE REAR DOOR INSIDE HANDLE SUB-ASSEMBLY


(a) Remove the bolt.


(b) Disengage the 2 claws and separate the rear door inside handle sub-assembly.


(c) Disconnect the 2 cables and remove the rear door inside handle sub-assembly.


5. REMOVE REAR SPEAKER


6. REMOVE REAR DOOR SERVICE HOLE COVER


(a) Disconnect each connector and remove the rear door service hole cover.


HINT:


Remove the remaining tape on the door side.


7. REMOVE REAR DOOR GLASS RUN


(a) Connect the window regulator switch assembly.


(b) Fully lower the door glass.


(c) Remove the rear door glass run.


8. REMOVE REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY


(a) Remove the 2 bolts, the screw and rear door window division bar sub-assembly.


9. REMOVE REAR DOOR QUARTER WINDOW GLASS


(a) Pull out the direction indicated by the arrow, remove the rear door quarter window glass and rear door quarter window weatherstrip as a unit.


10. REMOVE REAR DOOR QUARTER WINDOW WEATHERSTRIP


11. REMOVE REAR DOOR GLASS SUB-ASSEMBLY


(a) Remove the rear door glass sub-assembly as shown in the illustration.


(b) Disconnect the window regulator switch assembly.


12. REMOVE REAR DOOR WINDOW REGULATOR SUB-ASSEMBLY


(a) Disconnect the connector.


(b) Loosen the temporary bolt.


NOTICE:


If the temporary bolt is removed, the rear door window regulator may fall and become deformed.


(c) Remove the 3 bolts and the rear door window regulator sub-assembly and the power window regulator motor assembly rear as a unit.


(d) Remove the temporary bolt from the regulator.


13. REMOVE POWER WINDOW REGULATOR MOTOR ASSEMBLY REAR


(a) Using a "torx" driver (T25), remove the 3 screws and power window regulator motor assembly rear.


14. REMOVE REAR DOOR LOCK ASSEMBLY


(a) Disconnect the connector.


(b) Remove the bolt.


(c) Using a "torx" socket wrench (T30), remove the 3 screws.


(d) Slide the rear door lock assembly downward, pull out the link from the outside handle frame, and remove the rear door lock assembly and cables as a unit.


(e) Remove the door wire harness packing.


(a) Using a "torx" socket wrench (T30), loosen the screw.


(b) Disengage the 2 claws and remove the rear door outside handle cover.


(a) Disengage the 2 claws and remove the rear door outside handle pad rear.

Jan 03, 2011 | 2006 Toyota Highlander

1 Answer

How do i remove the driver's inside panel door? My electric button panel for windows and locks isn't moving.


Like reference guide, check this procedure to Removal & Installation / Door Lock Motor...

The door lock motor is integral with the door latch. If the door lock motor is found to be defective, the entire door latch must be replaced.
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Roll the door glass down.
  3. Disengage the 2 clips attaching the speaker grille to the door trim panel. (They are at the front of the grille, one near the top, and the other one at the bottom).
  4. Remove the 3 large washer-headed screws surrounding the speaker.

    6acb803.jpg
    Fig. Fastener location for the door lower trim panel
  5. Remove the access cover at the front of the door trim panel. Remove by prying at its rear edge.
  6. Remove the red courtesy reflector from the lower tail of door. Disengage by prying at the screwdriver notch at the bottom of the reflector.
  7. Remove the flag trim panel from the door by prying it off at the 2 attachment clip points.
  8. Remove the 7 screws attaching the door trim panel to door:
    1. One screw is located at the lower rear screw pocket.
    2. Three screws are located along the bottom of the door.
    3. One screw is located inside the handle opening.
    4. One screw is located at the upper front.
    5. One screw is in the pull cup.
  9. Disengage the 2 hidden clips attaching the rear of the trim panel; pry them off at the 2 attachment clip points.
  10. Lift the trim panel upward and away from the door, disengage the trim panel from the upper retainer channel.
  11. Disengage the clip attaching the latch linkage to back door handle.
  12. Disconnect the electrical connectors as necessary, including the lower foot light, if equipped.
  13. Remove the door trim panel from the door.
  14. Remove the water shield (water dam) from the inside of the door.

    b5ff0ae.jpg
    Fig. Remove the flag trim panel, door trim access cover, inside remote handle, and power door lock switch
  15. Raise the door glass.
  16. Remove the bolt and nut for the rear glass run channel and position the channel aside.
  17. Disconnect the lock rod from the lock button bellcrank.
  18. Disengage the lock and latch rods from the clips on the inner door panel.
  19. Disconnect the lock and latch rods from the outside door handle and the key cylinder at the door latch.
  20. Disconnect the wire connector from the power door lock motor.
  21. Remove the screws attaching the door latch to the door end frame.
  22. Remove the door latch and the power door lock motor from the vehicle.

    c5c04cf.jpg
    Fig. Expanded view of the door lock, latch, and linkage


    185c44d.jpg
    Fig. View of the door lock button, latch rod, lock rod, and door latch

Hope helps (remember rated this).

Jun 26, 2010 | 2000 Chrysler Sebring

1 Answer

How to remove door panel on a 1985 cadillac eldorado


Very easy! One tool that will save you a lot of headache and anger can be bought at any auto parts store and looks like this:


c3c9660.jpg
You use this tool to pop loose the plastic fastners that are attached to the door panel edges.

But first, remove all screws...remove the door handle cup, pop loose the master door/window stich assmbly, etc. Very simple process....takes less than 10 minutes.

Door Panel
  1. Remove all door inside handles.
  2. Remove the door inside locking rod knob.
  3. On styles with door pull handles, remove the screws inserted through the handle into the door panel.
  4. On styles with remote control mirror assemblies, remove the remote mirror escutcheon and disengage the end of the mirror control cable from the escutcheon.
  5. On styles equipped with switch cover plate in the door armrest, remove the screws securing the cover plate, then disconnect the switches and cigar lighter, if so equipped, from the harness connectors.
  6. Remove the remote control cover plates and remove the exposed screws securing the cover plate to the door inner panel.
  7. On styles with integral armrest, remove the screws inserted through the pull cup into the armrest hanger support. On some styles it may be necessary to remove the screws behind the armrest deflector or courtesy lamp remote control cover plate. On styles with armrest applied after the door trim installation, remove the armrest to door inner panel attaching screws.
  8. On styles with with two piece trim panels, disengage the retainer clips at the front and rear of the upper trim panel. Remove the upper trim panel by lifting upward and sliding slightly rearward to disengage the the front door inner panel at the beltline.
  9. On styles with electric switches located in the door trim panel, disconnect the wire harness at the switch assembly.
  10. To remove the lower trim panel, remove the attaching screws along the upper edge of the lower trim panel. Then starting at a lower corner, insert a pry type tool between the door inner panel and the trim panel and disengage the retaining clips down both sides and across the bottom. On styles with courtesy lamps or reading lamps located in the trim panel, disconnect the wire harness at the lamp assembly.
  11. On styles with one piece trim panels, remove all the clips around the perimeter of the trim panel. Push the trim panel downward and outboard to disengage it from the door inner panel at the beltline. Disconnect any courtesy lamp wire harnesses, if so equipped and remove the trim panel from the door.
  12. Installation is the reverse of removal. On styles with adjustable trim supports at the beltline, the door trim panel can be adjusted in or out so as not to restrict door window operation

May 08, 2010 | 1985 Cadillac Eldorado

1 Answer

How to replace instrument panel in 1996 grand voyager


Removal & Installation
  1. Disconnect the negative battery cable.
CAUTION The vehicles covered by this manual are all equipped with a Supplemental Restraint System (SRS), which uses an air bag. Whenever working near any of the SRS components, such as the impact sensors, the air bag module, steering column and instrument panel, disable the SRS, as described in Section 6.

THIS SHOULD READ STEPS 1-60:

  1. Disable the air bag system.
  2. Remove the screws that hold the lower instrument panel console to the floor bracket and instrument panel.
  3. Move the console rearward from around the instrument panel supports.
  4. Remove the lower instrument panel console.
df35aa2.gif
Remove the lower instrument panel console from the vehicle

952f3d7.gif
Remove the lower heat duct from the instrument panel support

09de2bc.gif
Remove the lower instrument panel supports from the vehicle

  1. Remove the screw that secures the lower heat duct to the instrument panel support.
  2. Remove the heat duct from the vehicle.
  3. Remove the bolts securing the lower supports to the instrument panel frame and floor.
  1. Remove the right instrument panel end cover by performing the following;
  2. Open the passenger side door.
  3. Disengage the retaining clips securing the cover to the instrument panel.
  4. Remove the foam pad covering the A/C inlet projection of the end cover, if equipped.
f73b40c.gif
Remove the left instrument panel end cover

  1. Remove the left instrument panel end cover by performing the following;
  2. Open the driver side door.
  3. Remove screws holding the parking brake release handle to the instrument panel.
  4. Remove the screws that hold the bottom of the lower steering column cover to the instrument panel.
  5. Remove the screw that holds the right side of the lower steering column cover to the instrument panel.
  6. Disengage the parking brake release cable case from the groove on the end of the parking brake release handle, then disengage the cable end pivot from the slot on the release handle.
  7. Disengage the retaining clips securing the end cover to the instrument panel.
  1. Disengage the wiring harness connector from the passenger air bag module.
  2. Disengage the hidden retaining clips that secure the door sill plate from the door sill. Remove the left and right side door sill plates from the vehicle.
  3. Disengage the hidden retaining clips that secure the interior cowl trim from the cowl panel. Remove the left and right side interior cowl trim from the vehicle.
  4. Remove the A-pillar trim covers.
0eb8f92.gif
Glove box assembly exploded view

  1. Remove the glove box.
  2. Unplug the antenna lead connector from behind the glove box.
  3. Remove the knee blocker reinforcement panel from under the steering column.
f2400f4.gif
Junction block and body control module connectors

  1. Unplug the lower two, 40-pin wiring harness connectors from the main junction block near the left side cowl panel.
  2. Unplug the instrument panel wiring harness connector from the bottom of the body control module.
  3. Unplug the two, 40-pin wiring harness connectors from the right of the steering column.
74914f1.gif
Remove the clinch bolt joining the upper-to-lower steering column shafts

  1. Remove the clinch bolt securing the upper steering column shaft to the lower steering column shaft. Separate the upper and lower shaft.
  2. Remove the nuts securing the instrument panel frame to the metal brake pedal support on each side of the steering column.
  1. If equipped with a mechanical transmission range indicator, perform the following;
  2. Remove the indicator cable loop.
  3. Remove the clip securing the gear shift cable end to the gear selector adapter.
  4. Pull the cable end from the gear selector.
  5. Disconnect the clip for the indicator cable and guide tube from the shift cable bracket and move out of the way.
  6. Remove the nut securing the gear shift cable bracket to the instrument panel frame.
  7. Remove the bracket from the instrument panel.
  8. Remove the screw and bolt holding the hood release handle to the instrument panel, then set the handle out of the way.
  9. Using a very flat pry tool wrapped in a towel to prevent scuffing or damaging the instrument panel pad, disengage the clips holding the rear edge of the instrument panel top cover. Pull up on the cover enough to unplug the wiring harness connector from the message center.
  10. Pull the top cover rearward to disengage the hooks that secure the front of the cover to the instrument panel. Remove the instrument panel top cover from the vehicle.
  11. Unplug the wire connector from the HVAC wiring harness connector behind the glove box area.
  12. Remove the bolts securing the instrument panel frame to the brackets on the cowl side panels.
  13. Loosen, but do not remove, the pivot bolts holding the instrument panel to the cowl panels.
  14. Remove the bolts securing the instrument panel frame to the dash panel below the windshield opening.
479e214.gif
Remove the instrument panel assembly from the vehicle

  1. With the help of an assistant, remove the instrument panel assembly from the vehicle.
To install:
  1. With the help of an assistant, correctly position the instrument panel assembly into the vehicle.
  2. Install and tighten the bolts securing the instrument panel frame to the dash panel below the windshield opening.
  3. Tighten the pivot bolts holding the instrument panel to the cowl panels.
  4. Install and tighten the bolts securing the instrument panel frame to the brackets on the cowl side panels.
  5. Plug the wire connector into the HVAC wiring harness connector behind the glove box area.
  6. Place the instrument panel top cover onto the instrument panel and plug in the wiring harness connector to the message center. Install the top cover being certain to engage all of the hooks and retaining clips.
  7. Place the hood release handle in position on the instrument panel. Install and tighten the mounting screw and bolt.
  8. Install the gear shift bracket to the instrument panel.
  9. If equipped with a mechanical transmission range indicator, install the indicator cable and guide tube. Install the cable retaining clips.
  10. Install and tighten the nuts securing the instrument panel frame to the metal brake pedal support on each side of the steering column.
  11. Join the upper steering column shaft to the lower steering column shaft and secure with the clinch bolt.
  12. Plug in the two, 40-pin wiring harness connectors to the right of the steering column.
  13. Plug in the instrument panel wiring harness connector to body control module.
  14. Plug in the lower two, 40-pin wiring harness connectors to the main junction block.
  15. Install the knee blocker reinforcement panel.
  16. Plug in the antenna lead connector.
  17. Install the glove box.
  18. Install the A-pillar trim covers.
  19. Install the cowl trim covers door sill plates
  20. Plug in the wiring harness connector to the passenger air bag module.
  21. Install the left and right instrument panel end covers.
  22. Install the lower steering column cover. Be sure to install the parking brake release handle.
  23. Install the lower supports to the instrument panel frame and floor. Install and tighten the mounting fasteners.
  24. Install the lower heat duct into the vehicle.
  25. Install the lower instrument panel console assembly.
  26. Connect the negative battery cable.
  27. Test all the instrument on the instrument panel assembly to verify that they operate properly.

Dec 07, 2009 | 1996 Plymouth Grand Voyager

1 Answer

How do I remove the door panel and replace the inside door handle


PLEASE DON'T FORGET TO RATE!!

Door Panel
  1. Remove the door handles and the locking knob from the inside of the doors.
If equipped with screw retained door pull handles, remove the screws through the handle into the door inner panel.
  1. If equipped with remote control mirrors, remove the remote mirror escutcheon, then disengage the end of the mirror control cable from the escutcheon.
5670a53.gif
Door lock remote control handle

849dcc4.gif
Removing the clip from inside the door handle

3. If equipped with a switch cover plate in the door armrest, remove the cover plate screws, then disconnect the switches and the cigar lighter (if equipped) from the electrical harness.
4. If equipped with an integral armrest, remove the screws inserted through the pull cup into the armrest hanger support. If equipped with an armrest applied after the door trim installation, remove the armrest-to-inner panel screws.

7c4bfcc.gif
View of the armrest switch cover plate and remove mirror cable attachment

  1. If equipped with two-piece trim panels, disengage the retainer clips from the front and the rear of the upper trim panel, using tool No. BT-7323A, then lift the upper door trim and slide it slightly rearward to disengage it from the door inner panel at the beltline.
If equipped with electric switches in the door trim panel, disengage the electrical connectors from the switch assembly.
  1. Along the upper edge of the lower trim panel, remove the mounting screws. At the lower edge of the panel, insert tool No. BT-7323A between the inner panel and the trim panel, then disengage the retaining clips from around the outer perimeter. To remove the lower panel, push the panel down and outward to disengage it from the door.
If equipped with courtesy lights, disconnect the wiring harness.
  1. If equipped with an insulator pad glued to the door inner panel, remove the pad (with a putty knife) by separating it from the inner panel.
To install:
If replacing the inner pad to the door inner panel, use 3M General Trim Adhesive No. 8080, glue it to the panel.
  1. If removed, glue a new inner pad to the door inner panel.
If equipped with courtesy lights, connect the wiring harness.

e8e7539.gif
Exploded view of the window regulator handle

4df80bc.gif
Exploded view of the door trim panel

  1. Engage the retaining clips around the edge of the lower trim panel, then install mounting screws.
If equipped with electric switches in the door trim panel, engage the electrical connectors to the switch assembly.
  1. If equipped with two-piece trim panels, engage the retainer clips to the front and the rear of the upper trim panel.
  2. If equipped with an integral armrest, install the retaining screws.
  3. If equipped with a switch cover plate in the door armrest, engage the switches and cigar lighter (if equipped) harness connectors, then install the cover plate and secure using the plate screws.
  4. If equipped with remote control mirrors, engage the control cable, then install the remote mirror escutcheon.
If equipped, install the pull handle screws through the handle into the door inner panel.
  1. Install the door handles and the locking knob to the inside of the doors.
3e5ae04.gif
Exploded view of the 2-piece door trim

  1. Remove the door handles and the locking knob from the inside of the doors.
If equipped with screw retained door pull handles, remove the screws through the handle into the door inner panel.
  1. If equipped with a switch cover plate in the door armrest, remove the cover plate screws, then disconnect the switch
from the electrical harness.
  1. If equipped with an integral armrest, remove the screws inserted through the pull cup into the armrest hanger support. If equipped with an armrest applied after the door trim installation, remove the armrest-to-inner panel screws.
  2. If equipped with two-piece trim panels, disengage the retainer clips from the front and the rear of the upper trim panel, using tool No. BT-7323A, then lift the upper door trim and slide it slightly rearward to disengage it from the door inner panel at the beltline.
If equipped with electric switches in the door trim panel, disengage the electrical connectors from the switch assembly.
  1. Along the upper edge of the lower trim panel, remove the mounting screws. At the lower edge of the panel, insert tool No. BT-7323A between the inner panel and the trim panel, then disengage the retaining clips from around the outer perimeter. To remove the lower panel, push the panel down and outward to disengage it from the door.
If equipped with courtesy lights, disconnect the wiring harness.
  1. If equipped with an insulator pad glued to the door inner panel, remove the pad (with a putty knife) by separating it from the inner panel.
To install:
If replacing the inner pad to the door inner panel, use 3M General Trim Adhesive No. 8080, glue it to the panel.
  1. If removed, glue a new inner pad to the door inner panel.
If equipped with courtesy lights, connect the wiring harness.
  1. Engage the retaining clips around the edge of the lower trim panel, then install mounting screws.
If equipped with electric switches in the door trim panel, engage the electrical connectors to the switch assembly.
  1. If equipped with two-piece trim panels, engage the retainer clips to the front and the rear of the upper trim panel.
  2. If equipped with an integral armrest, install the retaining screws.
  3. If equipped with a switch cover plate in the door armrest, engage the switch harness connector, then install the cover plate and secure using the plate screws.
If equipped, install the pull handle screws through the handle into the door inner panel.
  1. Install the door handles and the locking knob to the inside of the doors.

Nov 16, 2009 | 1987 Chevrolet Monte Carlo

2 Answers

Driver side power window stopped working


The door panel is held on by plastic clips and 5 screws. 3 screws are on the bottom and 1 in the pull cup and 1 in the inner door handle.Then grab one of the corners and give a small tug, when you get some of the clips to pop out then proceed around the whole panel. To replace the panel take the clips out of the door with a fork and slide them back into the panel and then line it up on the door and use your hand like a hammer and bang the panel back on. Hope this helps

Jan 12, 2009 | 2004 Chrysler Sebring

1 Answer

The window fell off it rollers


  1. Remove all door inside handles.
  2. Remove the door inside locking rod knob.
  3. On styles with door pull handles, remove the screws inserted through the handle into the door panel.
  4. On styles with remote control mirror assemblies, remove the remote mirror escutcheon and disengage the end of the mirror control cable from the escutcheon.
  5. On styles equipped with switch cover plate in the door armrest, remove the screws securing the cover plate, then disconnect the switches and cigar lighter, if so equipped, from the harness connectors.
  6. Remove the remote control cover plates and remove the exposed screws securing the cover plate to the door inner panel.
  7. On styles with integral armrest, remove the screws inserted through the pull cup into the armrest hanger support. On some styles it may be necessary to remove the screws behind the armrest deflector or courtesy lamp remote control cover plate. On styles with armrest applied after the door trim installation, remove the armrest to door inner panel attaching screws.
  8. On styles with with two piece trim panels, disengage the retainer clips at the front and rear of the upper trim panel. Remove the upper trim panel by lifting upward and sliding slightly rearward to disengage the the front door inner panel at the beltline.
  9. On styles with electric switches located in the door trim panel, disconnect the wire harness at the switch assembly.
  10. To remove the lower trim panel, remove the attaching screws along the upper edge of the lower trim panel. Then starting at a lower corner, insert a pry type tool between the door inner panel and the trim panel and disengage the retaining clips down both sides and across the bottom. On styles with courtesy lamps or reading lamps located in the trim panel, disconnect the wire harness at the lamp assembly.
  11. On styles with one piece trim panels, remove all the clips around the perimeter of the trim panel. Push the trim panel downward and outboard to disengage it from the door inner panel at the beltline. Disconnect any courtesy lamp wire harnesses, if so equipped and remove the trim panel from the door.
  12. Installation is the reverse of removal. On styles with adjustable trim supports at the beltline, the door trim panel can be adjusted in or out so as not to restrict door window operation.

Oct 14, 2008 | 1988 Cadillac Sedan DeVille

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...