Question about Cars & Trucks

Open Question

JUST HAD A NEW CLUTCH AND GEAR BOX FITTED AND SINCE THE CAR CAME BACK THE WIPERS HAVE NOT WORKED AND THE ENGINE DIES AS THE IMMOBILISER KICKS IN

HAVE DISCONNECTED THE WIPERS AND THE CAR STARTS WITH NO PROBLEMS. iI HAVE CHANGED THE WIPER MOTOR BUT THIS HASNT IMPROVED THE SITUATION.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 8 Answers

SOURCE: windshield wipers

According to AllData, you don't have to remove the motor to install a new switch. Subsequently, AllData doesn't give direction on wiper arm or motor removal. Here are the only diagrams they give for switch replacement.

41917584 41917585

Posted on Nov 26, 2008

alicantecoli
  • 22095 Answers

SOURCE: Wiper just suddenly stopped working on 1998 C230 Mercedes.

dont play with it the nut that holds your wiper arm on is loose ,pull teh plastis cover where the drive is and tighten the 13mm nut

Posted on May 30, 2009

  • 14 Answers

SOURCE: 93 f250 wipers don't work. Changed wiper motor.

Switch is bad.

B

Posted on Sep 10, 2009

seanpwright
  • 2030 Answers

SOURCE: audi a3 54 plate .new wiper motor fitted by dealer

The problem is in the wiper switch assembly itself.

Posted on Feb 02, 2010

  • 1 Answer

SOURCE: 1997 jeep wrangler fuse box diagram. wiper motor

The fuse for the wipers on a 97 wrangler are located behind glove box just unhook strap that holds up glove box and replace.

Posted on Aug 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi I fitted a new clutchkit,when I switch on the car canot get gears,but when of get please help


more than likely the clutch plate is incorrectly installed and the hub and springs are hitting on the flywheel bolts
fix is box back out and turn the clutch plate around

Jul 02, 2016 | Cars & Trucks

1 Answer

Why will the gears of my actros truck not workafter fitting new clutch


well a description of the problem would be a big help
does the gear crash when the clutch is pressed in
can the gears be engaged cleanly when the engine is stopped
did you install a single plate clutch or duel plate clutch
if the gears worked properly before removing the box , then the problem will be in the clutch plate fitting ( wrong way round and the hub is hitting on the flywheel bolts or duel plate on clutch bub is incorrect hitting on the other clutch hub)or the gear shifter installation after fitting the box

Sep 13, 2014 | Mercedes-Benz Mercedes Bentz Actros Semi...

1 Answer

Steps to Replacing a Clutch on mitsubishi express


for the full steps then get a workshop manual as there are some details that will be missed . Basically it is Remove the battery terminal. remove the rear drive shaft ( front also if 4wd). Remove the gear lever at the tower bolts on the gear box. Drain the gear box or be prepaired for the gear oil to run out the end of the transmission when you pull the box. . Place a bottle jack under the sump at the rear of the engine . Place a trolley jack under the gear box. undo the rear transmission mount cross member Undo all the bell housing bolts. lower the jack and the trolley jack and pull the gear box back. Undo the bolts holding the pressure plate on the flywheel a bit each at a time as you go around the plate . Remove the plate and the clutch plate ( be aware that the clutch plate will only go back in one way so watch the way the clutch hub was facing. Remove and replace the bearing in the back of the crank shaft. clean up the flywheel face ( good idea for a good non shudder job is to have the flywheel re-machined ) fit the clutch plate the right way and fit the pressure plate . Use a clutch aligner tool as it will be impossible to fit the gear box with out it. Replace the clutch throw out bearing. Now re install using the reverse processes As I said a manual shows it all

Dec 14, 2013 | Cars & Trucks

2 Answers

Replace clutch


this is easily done on this engine. just need a jack and some wheel ramps. take the battery off undo the starter motor, undo the box bolts to the engine and take the plate out. jack up remove the engine mount on gearbox side. ,then jack up after so engine is at an angle and pull off the gearbox and clutch housing oh forgot to say remove the gear link pin and clutch cable. now you can see the clutch and remove it. when putting the clutch back in locate the new clutch with a socket one of the long types think it was an 18mm just fits in right for the locator. then bolt down the new clutch take out the socket. and put back the engine in reverse. wiggle the gear box and casing to locate back onto the new clutch if dont fit in first time.

Oct 14, 2013 | 1994 Honda Civic

1 Answer

Int 806 will not move clutch is new


Fit 4th gear Release hand brakes on strait floor with open hood and push the car back and Forward to see if the engine engage your gear box if is not your clutch is back to front.if engage press the clutch pedal to make release of the gear,notes mechanical clutch cable or hydraulic system. check Release bearing arm position.

Sep 29, 2012 | Peugeot 806 Cars & Trucks

1 Answer

1991 sabb 900 turbo 5 speed manual trams ... I was driving down the road shifted In to fourth gear and the transmission locked up or it has something to do with the brakes .. I can put the car in gear and...


tyres thats normal thats how the dif works wheels go opposite ways. im thinking the linkage has snapped inside the gearbox. its a half circle that moves the cogs for the gears. if its locked in place then its slipped. it would need a replacement gearbox. part of it mus be broken off and in the cogs thats why its cutting the engine out it will act like a brake and just burn the clutch out if you keep doing it. replace the gear box, its lasted a long time from 1991 if its original, when fitting new gearbox replace the gearbox fluid. give the gear box a good flush out before fitting.

Jun 05, 2017 | Cars & Trucks

2 Answers

I need to know how to replace a clutch on a 1989 4 runner toyota pickup 6 cylinder engine


2Ways 1 take the Engine out and fit the new clutch if you have a block and tackel or crane to lift it.
2nd Jack up truck as high as possible and fit stands under,, Rmove gear levers/tail shafts/ transfer box and all other parts before removeing X member on box/ and put jack under engine/before removing all bell housing bolts and starter motor..remove box assy.. fit new clutch, refit box etc in reverse of removal.. But engine out is the BEST WAY

Oct 02, 2009 | 1989 Toyota Pickup SR5

1 Answer

How do you change the clutch and pressure plate?


Easily. Remove the gear box, the roller bearing is fitted to the box, so yoou dont have to worry. The clutch and plate is fixed to the engine held in with hex nuts, you'll need allan keys to remove them, remove the bolts and the clutch and pressure plate will fall away. Take the new one from the box, being carefull not to contaminate with grease or oil that is on your hands, fit the pressure plate into the clutch assembly and line up to the engine and loosly tighten up so the pressure plate will move with a little resistance. This is where the fun starts. Get your socket set handle and push it through the housing into the engine. Centralise the pressure plate as accurately as you can. Offer the gearbox slowly to the clutch and try to push it home. The pressureplate should have enought movement in it to move slightly to allow the gear box to fit. Once fitted, slowly and levelly remove the box, then tighten all of the clutch housing into place. Refit the box, tighten and go for a cup of coffee to congratulate yourself! The only other adjustments you have to make are to the clutch cable. Loosen the lock nut, loosen the adjuster bolt, tighten the adjuster bolt until the cable becomes taught, depress the clutch and you should feel the clutch release. Tighten the locknot and that's it. Hope all goes well, any problems let me know any problems let me know and I'll help. Regards, Dave.

Aug 11, 2009 | 2005 Kia Rio

1 Answer

Knocking noise when changing gear


your clutch is the problem,i would suspect master cyclinder??could have trapped air in the system needs air removed ie;bleeding;;;;;; {you did fit a new clutch when gear box was fitted}??? hope this helps.adrian

Feb 18, 2009 | 1995 Land Rover Discovery

1 Answer

Clutch heavy


You will save heaps of time just moving the engine forward enough to do the clutch job. Remove a battery cable before you start! Frankster016

Nov 19, 2008 | 1998 Subaru Forester

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...