Question about Cars & Trucks

Open Question

My reset button is missing so i cant reset the service display can i get another and is it easy to replace

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just had my rear brake pads & sensors replaced. How do I get the light off ( reset) ?


You can not simply reset the light, you have to actually replace the brake sensor wire that connects to the rear brakes. This is a sensor that is worn through, when the brakes get low, the sensor rubs the rotor and breaks the connection, turning on the light. You need to get a new sensor from a dealer and replace the brakes and sensor together to get the light off.

After replacing the wire as stated do the following to reset the light and mileage countdown timer.


To enter this mode, with ignition on, hold the odo reset button (located on the left side of the instrument panel under the tach) for about 10 seconds.

The center of the info display will change to "service". It will have an icon for which service feature and the miles/date left until service is required. These icons are the same as displayed on the I-drive service screen. So, you can go through the Idrive service screen to get familiar with the icons prior to doing this.


Once in this mode, push the reset button to cycle through the various service items.

To reset a service item that is displayed, hold the reset button. I don't remember how long, but the display will change to a reset mode. You must release the button once it enters this reset mode. Then you will need to confirm the reset by pressing the reset button again.

The reset service interval will then be changed.

You can continue pressing the reset button to scroll through the other icons.

I think to exit, simply shut off the ignition.




Aug 30, 2011 | 2004 BMW 5 Series

1 Answer

I have a 2008 Toyota Yaris, I just had the oil changed and I need to turn off my check engine light they did not do it where i got the oil changed. I have done it before but cant remember how??


Instructions
    • 1 Insert the key into the ignition. Turn the switch to the "On" position.
    • 2 Press the odometer reset button repeatedly until "Trip A" is displayed.
    • 3 Turn the ignition to the "OFF" position.
    • 4 Press and hold the odometer reset button. Turn the ignition switch to the "ON" position.
    • 5 Release the odometer reset button after the indicator displays "000000." The maintenance service light turns off.


Read more: How to Reset the Maintenance Service Light on a Toyota Yaris ' eHow.com http://www.ehow.com/how_7211378_reset-service-light-toyota-yaris.html#ixzz1QfXJpIaWI do hope you meant the maintenance required light and NOT the check engine light as you said.

Jun 29, 2011 | 2008 Toyota Yaris Sedan

1 Answer

How do you reset service massage on my 2007 s550


Service reset
1. Turn the ignition ON
2. Press button [1] to display the kilometre reading

tdisline_589.jpg
3. Press button [2] to display the maintenance symbol
4. Press the reset button [3] for 3 seconds
5. Until the display asks if you want to reset the service interval
6. Press the reset [3] within 5 seconds to confirm
7. The new service interval appears on the display
8. Turn the ignition OFF
9. The system is reset

May 27, 2011 | 2007 Mercedes-Benz S550 Sedan

2 Answers

2007 bmw 525xi turn off service light for rear brakes


to reset light brake sensor must have been replace close door turn key on but dont start car when time is displayed on instrument cluster press and hold button on left side of cluster a orange triangle will appear keep holding next service function will be displayed release button to scroll through services that can be reset just push button again without holding when rear brakes are displayed on cluster press and hold button again the message reset with a question mark will come up release button and then press and hold again and light will reset

Jun 18, 2010 | 2007 BMW 525xi Sedan

1 Answer

We have just service our 1998 Jeep Cherokee Larano as per the service schedual I cant get rid of the service now off the dash, how can I remove this & reset for the next service


If it has a service indicator light in the middle of the dash then try this;

1. Turn the ignition to the run position but do not start the engine.

2. Press the "Set" button until "0 Miles To Service" is displayed.

3. Then hold the button just below the "Set" button down until "3000" is displayed.

On some applications you might also have to hold the "Set" button down.

If you have an overhead console computer try this;

1. Turn the ignition to the run position but do not start the engine.

2. Press the "Step" button until you see Zero Miles To Service displayed.

3. Then press and hold "RESET" until the display resets.

May 17, 2010 | 1996 Jeep Grand Cherokee

1 Answer

How do reset emission light on vw golf 1.4 petrol


If you mean the service light here is the procedure.
Button #1 mileage reset button
Button #2 Clock adjustment button

  • Switch ignition off
  • Press and hold button #1 at bottom left of speedometer
  • Switch ignition on and release button
  • The text "service Oil or service INSP" will appear in the display window. On 2000 m, y, cars the message "SERVICE NOW" will appear in the instrument cluster with center display
  • Turn button # 2 at lower side of tachometer to the right
  • The service display shown in the display window is now reset and "service _ _ _" will appear in the display window
  • Switch ignition off, service display is now set until next scheduled service interval is reached.

Mar 25, 2010 | 2000 Volkswagen Golf

1 Answer

I need to reset the b service on my clk550. How


1.- Insert key into ignition, switch to position "1"
2.- Press the menu buttons repeatly until the mileage is displayed within the multifunction display.
3.- Press the cluster illumination button (trip reset button) 3 times in short succession. The battery voltage will be displayed and an audible signal will sound.
4.- Turn key in ignition to position "2"
5.- Press the Up and Down Arrow buttons until service menu appears.
6.- Press cluster illumination button (trip reset button) once. The oil type menu is displayed.
7.- Use the + and - buttons to select the oil used for service.
8.- Press the Up and Down buttons to confirm. The display will show : "Reset Oil Confirmation. Push Illumination button for 3 seconds".
9.- Press and hold the cluster illimination button for 3 seconds. The message "Service confirmed" is displayed.

Mar 01, 2010 | 2007 Mercedes-Benz CLK550 Convertible

1 Answer

How do I reset the service reminder on a 2006 c230


Below is the procedure for resetting the service reminder:

  • Switch on ignition.
  • Press the system selection button repeatedly until the total mileage is displayed in the multifunction display.
  • Press the scroll forward/backward button repeatedly until the service symbol is displayed in the multifunction display.
  • Press and hold the reset button for 3 seconds.
  • The multifunction display will show "DO YOU WANT TO RESET THE SERVICE INTERVAL? CONFIRM WITH THE RESET BUTTON”.
  • Press reset button to confirm.
  • Switch off ignition.

Nov 23, 2009 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...