Question about Cars & Trucks

1 Answer

I have a freight liner Columbus that keeps saying no Eng. we have changed a number of things but the truck still says no eng. any advice as to what possibly is wrong.

I have a freight liner Columbus. They changed the starter on the truck and connected the wires the wrong way. of coarse it made a short and burnt the starter wires. the problem that I have is the truck wont start and it keeps saying no eng. we changed the fuses, fixed the wires, changed the relays, and we changed the computer box. still nothing.

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 24,322 Answers

In general once you get the error code "no engine" reading on your instrument cluster it is usually an indicator of lost communications between your engine and the trucks instrument cluster.Which does fall in line with your diag. of possibly the wires having been hooked up improperly.This is only part of what could be wrong,the Freightliner Sterling Truck is a good unit but once you get into electrical issues it can become a nightmare especially while trying to follow the engineering wiring schematics/diagrams. A workshop manual will be imperative!

Posted on Apr 21, 2017

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rattle noise at idle. Gets less as eng r p m increases-97 toyota camry


how is the engine oil ? when was it last changed as old oil is less effective , try an oil and filter change , but a hard rattle as you describe it may be something ,not more serious , but maybe a loose drive belt or some thing that when engine revs increase's it becomes noticable though is still there ,if oil change makes no difference have a good listen around engine also underneath to try to narrow down location , hope this helps keep me posted if you wish

May 20, 2014 | 1997 Toyota Camry

1 Answer

Keeps trying to die when you push the brake or turn on the ac or heat?


sounds like you have a broken ground wire, check passenger side og engine towards back of eng. Should have a groung wire from eng to firewall and ground from firewall to frame, if one of these is broken (rusted through) it will cause the problem you are having because when you apply brakes or turn on heat/ac it takes away ground for eng.

Dec 20, 2012 | 2005 Chevrolet TrailBlazer LS

1 Answer

I own a 2002 mustang with v 6 eng.service eng light came on. pep boys retreived fault code that reads p0304.eng has new plugs and wires


P0304: Cylinder Misfire Detected (#4)

-Last number corresponds to which cylinder is misfiring.


Could be a faulty spark plug or wire. Try changing the spark plug from the 4 Cylinder to another and see what happens; If the different cylinder misfires, then it is the spark plug. If not, it could be the wires on cylinder 4.

Jan 04, 2011 | Ford Mustang Cars & Trucks

2 Answers

My 2001 ford expedition is making a knocking noise when I start it.


YOUR ENG IS GIVING YOU WARNING . MY FRIEND HAS THAT PROBLEM A NOISE DURING START AND AFTER START. NO DTC CODES OR CH. ENG LIGHT. IN SHORT HIS ENG WENT BAD. END UP CHANGING THE WHOLE ENG. ACCORDING TO THE MECH. SOME SAY THE OIL PUMP WORK AND DONT WORK CAUSING THE ENG TO BRAKE OR BROKEN. HAVE A SHOP TO LOOK AT IT DURING START AND AFTER START IT MIGHT SAVE YOU MONEY FOR LABOR AND ENG. HIS FORD SUV EXPEDITION COST HIM A LOT AND LOVE IT BUT THE COST IS HIGH. GOOD LUCK.

Aug 03, 2010 | 2001 Ford Expedition

1 Answer

Can you swap a 5.7 liter hemi into a 94 camaro?


measure the eng compartment,if eng is smaller it may go in then eng mountings,will they line up will propshaft fit eng,,these things you take into account if its worth doing

Jul 07, 2010 | 1994 Chevrolet Camaro

2 Answers

Propane test on eng.


Your mechanic did a good test by externally adding more fuel to the engine. The fact that the addition of the extra fuel to the engine changed the engines behavior would suggest he is on the right track.

Feb 26, 2010 | 1998 Ford Ranger SuperCab

1 Answer

Eng.lightis on code#p0031.


Have you diconnected the battery for 20 min to reset the puter?

Sep 11, 2009 | 2004 Jeep Grand Cherokee

1 Answer

After start, eng. shakes at idle. 2001 VW Jetta


if it has a 1.8 coils are bad but check mass air meter and throttle as well

Jul 21, 2009 | 2001 Volkswagen Jetta TDI

1 Answer

1992 EX Check Eng. light comes on Eng. quits


When your engine not starting or quits while you driving check to see any sparks, or remove the distributor and let the auto part test it. if it no sparks or the auto part say is bad , replace it.

Mar 29, 2009 | 1992 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14398 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...