Question about 1995 Ford Mustang

1 Answer

Where can you find a gem module for a 1995 mustang?

I am having the exact same problem as this guy. If the problem is the gem module, is there any autoparts store that would have this part? If so, how much am i looking at spending to replace it?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 48 Answers

You can check the internet for the part, or you can call a junk yard, the dealership will charge a fortune for that part...........the gem module is part of the on-board computer, they generaly run anywhere from $100.00 and up over $1,000.00 so do not be suprised if it costs around $1,500.00 depending on if you still can get that part from a dealership or parts store......

Posted on Jul 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How dose the 4x4 get it's power on a 1998 f250


How Does .
Well , the 4X4 mode switch on the instrument panel get Power from the GEM - genaric electronic moduel . The transfer case shift module get's power from fuse #17 30amp located in the power distribution box . The transfer case electric clutch relay gets power from fuse # 23 10amp located in the junction box fuse / relay panel . System controlled by the GEM module . Could have DTC'S - diagnostic trouble codes stored in the GEM

Mar 04, 2017 | Ford F-250 Cars & Trucks

1 Answer

I have a 2001 F150 king ranch 4x4 that blows a fuse while selecting 4 wheel drive


What fuse blows ? The four wheel drive switch is a input to the GEM - generic electronic control module , low voltage ! There are a few different relays, a shift motor on the transfer case . There could be DTC'S - diagnostic trouble codes stored in the GEM module . You can find free wiring diagrams at http://www.bbbind.com/free_tsb.html Do you know how to do basic automotive electrical testing ? When you turn the switch to engage the 4X4 , the GEM see's that input an then energizes a relay to engage the 4X4 . Knowing which fuse blows would cut down on the guess work !

Dec 02, 2016 | Cars & Trucks

2 Answers

2000 navigator relay clicking and windows only work with dome light on when vehicle is shut off the dome lights flash for several seconds the wipers quit working also where do I start?


All these components are controlled by a computerized module. You can try disconnecting/reconnecting the battery as this may reset the module. If no results you will have to have this modules operation checked for any codes/failures with a scan tool to possibly pont you in the right direction

Jun 14, 2015 | 2000 Lincoln Navigator

2 Answers

I bought a 99 ford mustang without a radio installed yet there is an aftermarket radio in the back seat, the wipers are not working and i have checked the fuses they appear fine, i also pulled plug source...


Defective switch or wiring between switch and motor. The 1 wire that does have voltage is for the park function. I would pull the switch and test for voltages going into the switch, with ignition switch on, then turn the wiper switch on and see if you have any voltages coming out.

Mar 30, 2015 | Ford Mustang Cars & Trucks

1 Answer

2003 ford ranger windshield wiper won't come on. Replaced fuse, relays, switch and motor. I'm lost. No sign of an SJB in this truck.


No smart junction box , GEM - generic electronic module ! this module energizes the relays in the battery junction box ! The gem module is behind the center of the dash !
Generic Electronic Module (GEM) Removal and Installation
  1. > CAUTION: Prior to removal of the generic electronic module (GEM), it is necessary to upload module configuration information to the diagnostic tool. This information needs to be downloaded into the new module once installed. For additional information, refer to Section 418-01 .
    Depower the supplemental restraint system (SRS). For additional information, refer to Section 501-20B .
  1. Remove the radio chassis. For additional information, refer to Section 415-01 .
  1. Remove the center instrument panel finish panel.
    1. Remove the screws.
    1. Remove the center instrument panel finish panel.
    • Disconnect electrical connectors.
    • Module Controlled Functions The multifunction modules consist of the following:
      • generic electronic module (GEM)
      • central security module
      The GEM controls the following features:
      • front wiper and washer
      • warning chime
      • battery saver
      • illuminated entry and interior lighting
      • driver one-touch down power window (optional)
      • battery saver relay
      • door ajar warning indicator lamp
      • safety belt warning indicator lamp
      The central security module controls the following features:
      • remote keyless entry
      • computer-operated lock system
      • trim switch unlock inhibit
      It's more then likely to have DTC'S diagnostic trouble codes stored in it's memory !
    • B1431 Wiper Brake/Run Relay Circuit Failure GEM REFER to Section 501-16 . B1432 Wiper Brake/Run Relay Circuit Short to Battery GEM REFER to Section 501-16 . B1434 Wiper Hi/Low Speed Relay Circuit Failure GEM REFER to Section 501-16 . B1436 Wiper Hi/Low Speed Relay Circuit Short to Battery GEM REFER to Section 501-16 . B1438 Wiper Mode Select Switch Circuit Failure GEM REFER to Section 501-16 . B1441 Wiper Mode Select Switch Circuit Short to Ground GEM REFER to Section 501-16 . B1446 Wiper Park Sense Circuit Failure GEM REFER to Section 501-16 . B1450 Wiper Wash/Delay Switch Circuit Failure GEM REFER to Section 501-16 . B1453 Wiper Wash/Delay Switch Circuit Short to Ground GEM REFER to Section 501-16 . B1458 Wiper Washer Pump Motor Relay Circuit Failure GEM REFER to Section 501-16 . B1460 Wiper Washer Pump Motor Relay Circuit Short to Battery GEM REFER to Section 501-16 . B1462 Safety Belt Switch Circuit Failure GEM REFER to Section 413-09 . B1466 Wiper Hi/Low Speed Not Switching GEM REFER to Section 501-16 . B1473 Wiper Low Speed Circuit Motor Failure GEM REFER to Section 501-16 . B1476 Wiper High Speed Circuit Motor Failure GEM REFER to Section 501-16 Your wipers do not work at all ? did you check this fuse Central Junction Box (CJB) fuse 16 (30A)
      • The wipers are inoperative
      • Central junction box (CJB) fuse:
        • 16 (30A)
      • Circuitry.
      • GEM.
      • Multifunction switch.
      • Wiper run/park relay.
      • Wiper HI/LO relay.
      • Wiper motor.
      • GO to Pinpoint Test A .
      Before replacing parts you need to test , check for codes !

Mar 09, 2015 | Ford Cars & Trucks

1 Answer

Put a 1996 mustang v6 motor into a 1995 mustang that had a v6 now I can't get any fire


There should be a distributor module screwed to the side distributor, Make sure it did not get damaged or try putting the original one on the motor you just installed. There is special tool for the screws , It cost about $12.00 the d module itself cost about $60.00, I hope this helps and that it fixes your problem. Michael

Feb 13, 2013 | Cars & Trucks

1 Answer

Courtesy Chime Chime Chime will not shut off. What do I have to do to troubleshoot the GEM Module and whatever is connected to/through it?


If the chime includes the cab light staying on as well:
There is a door switch in both the driver and passenger side doors that needs attention. I too had this problem. Solution: squirt wd40 onto the switch located near the door latch on both driver and passenger side.

Dec 26, 2012 | 1995 Ford Ranger Supercab

1 Answer

I have a 1995 mustang change module coil rc module distributor still no spark or injector pulse,


Start with checking all your fuses, after that it could be a lot of different things. Good luck...

Nov 17, 2011 | 1995 Ford Mustang

1 Answer

I have a 1996 Ford Ranger Pickup. It was stolen in June while I was on vacation. The guy who stole it tore out the ignition switch and now the wiper switch doesn't work. I have had it looked at 2 times...


The pulse module every salvage yard has this, these dont fail its known as a internal govenor and by the way there is no module for these leave it alone I really doubt you have a problem with this device its well protected the wiring goes into and is part of the multi fuction switch, If a Auto tech scanned your car he or she would enter what they call a GEM module and your ranger doesnt have one you have a wiring problem

May 03, 2011 | Ford Ranger Cars & Trucks

Not finding what you are looking for?
1995 Ford Mustang Logo

Related Topics:

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...