Question about Honda Cars & Trucks

1 Answer

2006 honda civic EXcheck engine light code miss fire cyl 1 new fuel pump new plugs coil packs running lean need help mike

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Honda Master
  • 521 Answers

Change the #1 fuel injector to #2 and #2 to #1 position.If the miss fire code changes to #2 cyl that fuel injector may need to be changed.I would try that first before spending $$$

Posted on Apr 21, 2017

Testimonial: "thanks mike"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The engine light came on in my 2003 Honda civic LX. My mechanic stated code was misfiring on cylinder 3. He changed the coil pack and reset the engine light. The car still seems to misfire when it is...


If you pull the plug wire from the spark plug on cylinder 3, is there any oil, water, or antifreeze in there? Have you removed the plug to see what condition it is in? If it is black or oil-fouled, you should replace it, or better yet, the entire set of spark plugs. When the coil pack was replaced, was the plug wire replaced as well? I have seen a stuck fuel injector cause your problem before, because the cylinder does not get the right amount of fuel, running either too lean, or too rich.

Apr 21, 2017 | Cars & Trucks

1 Answer

1995 Mazda b2300 miss fire on # 2 cyl


Could have a vac leak or intake valve problem.
Yes it is possible to have an issue with the ignition module. I show a separate module from the coil pack.

Jul 10, 2012 | Mazda Cars & Trucks

1 Answer

Engine code P2187 pops up. Also had miss in cyl 1 but resolved by changing long overdue plugs. Now P2187 comes on again (Lien at idle) Any suggestions before I bring it in. Vehicle has 145K miles. Runs...


P2187 = "system too lean at idle, bank 1"

The problem is in the bank of cylinders that includes cylinder 1. Running too lean at idle can often be caused by an air leak between the mass air flow sensor and the throttle body, a leaky intake manifold gasket, or some other vacuum leak. "False air" is downstream of the MAF sensor so it is not measured. The computer only attempts to add the correct amount of fuel to air that it knows about. It will attempt to compensate for lean mixtures but at a certain point, it will turn on the check engine light.

The miss that you had on cylinder one was caused by two things; the false air leaning out the mixture and a worn plug. You replaced the plug and now that new spark plug is able to fire the lean mixture. But the false air remains to be corrected. Eventually, you'll have misfiring again.

Feb 25, 2011 | 2006 Kia Optima

1 Answer

2003 ford taurus - replaced fuel filter & fuel pump - runs great then starts chugging, RPM's drop, pull over, turn it off and wait about 1 or two minutes, then runs great, only in the heat of...


is the car missing when driving? 2000 and on has coil over plug's there are no wires. Is the check engine light on? if so go to an Auto Zone parts store or one that will scan the car computer for free and get the codes out to pin point the problem. Sounds like the cars miss firing. it could be more than one coil and or plug going bad. Did you replace any coil packs? Bad coil packs are 90% of all miss fires on todays cars and trucks.

Aug 09, 2010 | 2003 Ford Taurus

1 Answer

I have a 2004 Honda Odyssey multiplt missfires (tcs/engine light)


It sounds like fuel starved at higher speeds. i would change the fuel filter first if this does'nt help check the fuel pressure

Jun 18, 2010 | 2004 Honda Odyssey

2 Answers

Check engine light is on on my 2004 civic lx obd 2 scanner gives code 302 changed plugs but that did not fix the problem


A P0302 code means that the car's computer has detected that one of the engine's cylinders is not firing properly. In this case it's cylinder #2.

A code P0302 may mean that one or more of the following has happened:

Faulty spark plug or wire
Faulty coil (pack)
Faulty oxygen sensor(s)
Faulty fuel injector
Burned exhaust valve
Faulty catalytic converter(s)
Running out of fuel
Poor compression
Defective computer

Jan 19, 2010 | 2004 Honda Civic

3 Answers

Hesitation in engine


Actually there are two kinds of engine hesitation.One is from fuel then two is the air .The mechanic should check on the fuel filter .look if the fuel that is going to the fuel pump is dirty or worn out . check the fuel filter then look if it is dirty and needed to be replace or change.Then the second is that the air filter it should also be check if dirty then replace it so that no dirt will go to the engine . if these problems are not solved then the cylinder will be having a problem that will cause the engine to hesitate.And always check the fuel you use to place to the fuel thank if dirty or diluted just to be sure.

Aug 20, 2009 | 2002 Jaguar S-Type

1 Answer

What is the meaning of 98 Honda Civic error codes P0300 P0303 P0304? Engine will not start, does not seem to fire.


P0300 indicates that there is multiple miss fire in the ignition system. P0303 and p0304 indicates the miss fire is in cylinder #3 and #4. Replace the spark plug, and wire set, and rotor and cap if there is one. Can not remember if there are coil packs on the civic, the age thing. change the fuel filter and clean out the fuel injectors with fuel injector cleaner for the next 3 full ups. When the spark plugs are removed, inspect them for condition, if there clean or dirty with carbon build up. which would indicate how the engine is running. Keep me posted and drive safe.

Jun 04, 2009 | 1999 Honda Civic

1 Answer

I am helping my daughter with her 2005 Altima 2.5 They were driving it on the highway and the check engine light came on, started missing, loss of power. It was smoking white (not like a burning type of...


First thing you can do to eliminate a possible cause is trade the coil packs between 1&4, and 2&3. Check again and if 1&4 are now dead, then you replace the bad coil pack.

You stated that the plugs were wet, but didn't say from what. What did the plugs smell like? Oil, fuel, or coolant?

Please let me know what was on those plugs, as there could be other causes as well.

Apr 18, 2009 | 2005 Nissan Altima

2 Answers

2001 ford taurus p0301 and p0303


You are mis fireing on cyl 1 and 3 if you replaced plugs and wires and coil this is going to be a fuel injector issue or valve issue. See if you can swap the injectors with known good cyl. and see if it changes. Or have a shop do a fuel injector service on it to see if it helps. It may be to late for the fuel injector service.

Mar 01, 2009 | 2001 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...