Question about Cars & Trucks

1 Answer

How to replace front strut mount on 2009 Corolla

Posted by on

  • yadayada
    yadayada Apr 20, 2017

    Exactly what are you referring to when you say mount?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Cars & Trucks Master
  • 400 Answers

You need to remove the whole assembly from the car and have access to a strut spring compressor. The energy stored in the spring can seriously injure or kill you if you don't know what you are doing. Don't try to do it unless you have the proper tools.

All about strut mounts

Posted on Apr 20, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are the Front and Rear Strut lower two bolt nut torquing requirements? Are they really 221 ft-lbs?


Front lower strut/ shock mount 155 ft/lbs.
Rear lower strut/ shock mount 133 ft/lbs.

Jun 03, 2015 | 2009 Toyota Camry LE

1 Answer

Change CV joint without disturbing an alignment?


Not all struts are adjustable there . Most times the strut is held on to the stub axle with two bolts one is off set if adjustable . center pop the bolt and housing so it be refitted in the same place.

Apr 21, 2014 | 2009 Ford Escape

1 Answer

Hitting bumps causes rattling in front end


Check the front suspension. Could be numerous of things. Sway links could be worn out, front struts could be time to replace, or a engine or transmission mount is bad.

Mar 22, 2013 | 2009 Chrysler PT Cruiser

2 Answers

2001 COROLLA SHAKING ABOVE 80KM'S MANUAL 1.8


Shakes ONLY under acceleration? Goes away when you back off of the throttle? Are you sure?
Please inspect the front and both side engine mounts.The half shafts will cause that sort of a shake(whole car) when they go bad(inboard CV joints).
Aggravated OR caused my a motor mount that has shifted to one side,binding the half shaft.
Common in Chrysler mini vans!!!!!!That is why the front motor mount is adjustable.
Check the engine mount on the short half side first.

Mar 03, 2013 | 2009 Toyota Corolla 1.8

1 Answer

How to replace the shocks on my 2000 Mazda 626


REMOVE**** FRONT SHOCKS, FIRST OF ALL.SUPPORT THE LOWER CONTROL ARM WITH A JACK,REMOVE FRONT WHEEL, REMOVE BRAKE HOSE AND ABS SENSOR HARNESS TO THE STRUT BOLTS OR CLIPS,REMOVE ACTUATOR FROM TOP OF THE STRUT,IF EQUIPPED WITH AUTOMATIC ADJUSTING SUSPENSION. PAINT ALIGNMENT MARKS ON THE UPPER STRUT MOUNTING BLOCK AND STRUT TOWER AND ON THE LOWER STRUT MOUNT TO STEERING KNUCKLE SO THAT CAN BE REINSTALLED IN THE SAME POSITION. REMOVE UPPER STRUT MOUNTING NUTS, REMOVE THE STRUT TO KNUCKLE BOLTS,REMOVE STRUT ASSEMBLY.TO INSTALL ***** INSTALL STRUT INTO THE STRUT TOWER ALIGNING THE PAINT MARKS MADE DURING REMOVAL.INSTALL UPPER MOUNTING NUTS AND TIGHTEN TO 34 - 46 FT LBS. INSTALL STRUT TO KNUCKLE BOLTS TIGHTEN TO 55 - 61 FT LBS. INSTALL ACTUATOR AND ENGAGE THE ELECTRICAL CONNECTOR IF EQUIPPED WITH AAS. INSTALL BRAKE HOSE AND ABS SENSOR HARNESS CLIPS OR BOLTS.INSTALL WHEEL AND CHECK ADJUST THE FRONT END ALIGNMENT. TO ( REPLACE REAR SHOCKS ) REMOVE REAR WHEELS, REMOVE REAR PACKAGE TRIM. REMOVE SPEED SENSOR HARNESS, REMOVE TOP STRUT NUTS,THE SUSPENSION WILL DROP WHEN THE WEIGHT LIFTS OFF THE WHEELS. REMOVE BOTTOM STRUT BOLTS.REMOVE STRUT ASSEMBLY.TO INSTALL ***** INSTALL STRUT ASSEMBLY, INSTALL BOTTOM STRUT MOUNT BOLTS AND TIGHTEN TO 55 - 61 FT LBS.INSTALL UPPER MOUNTING NUTS AND TIGHTEN TO 33 - 46 FT LBS. INSTALL SPEED SENSOR HARNESS.INSTALL REAR PACKAGE TRIM. INSTALL REAR WHEELS.

Sep 22, 2010 | Mazda 626 Cars & Trucks

1 Answer

Want to put 20" rims on a stock front wheel drive toyota corolla


unfortunately there is not unless u extend the actual strut only way i can think of is to get adjustable struts they got a smaller bottom plate plus u can adjust em lol

Feb 28, 2010 | 2008 Toyota Camry

1 Answer

My 95 toyota corolla makes grinding scraping noise when going uphill. It's coming from the right front of the car. Almost sounds like it's coming from the breaks or transmission. A mechanic thinks it could...


Bad motor mounts will not usually cause the kind of noise you describe they will cause more vibration to be felt at all times.

Sometimes the brake rotor dust cover plate can rub against the rotor and make a grinding/scraping sound. Raise the car, remove the wheel, and check the clearance between the dust cover and the rotor.

If your shocks/struts are bad the tire could be rubbing against the strut. Check the strut.


Dec 12, 2009 | 1995 Toyota Corolla

1 Answer

87 Audi Coupe - Clunking Noise


the car is aging

there are other bushings and ball joints to make noises at that speed

the top rubber mounts failed for a reason

if i were on that job i would have replaced both gas struts
at the same time....

not much structure to the top strut mounts
see pictures in link
Strut Mount Early Small Chassis Audi Density Line





sus-r0fvbv0fnqz1bkfnyk2eh2wx-2-0.jpg

index-r0fvbv0fnqz1bkfnyk2eh2wx-2-1.jpg

Mar 08, 2017 | 1987 Audi GT

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...