Question about Honda Cars & Trucks

Open Question

On a 2007 Honda Civic EX does the round plastic plug on the front of the timing chain cover need sealant?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 84 Answers

SOURCE: 2004 honda civic ex

Hello, Your Honda Civic with a 1.7 L engine has a belt.
CYA, Gator241

Posted on Feb 09, 2009

Ad
  • 260 Answers

SOURCE: Motor Oil leaks from 1999 Honda Civic EX

make sure they are tight
could be time for head gaskets
make sure the old gasket from the old filter came off the block sometimes they come off old filter and stick this causes a leak due to improper seal.

Posted on Apr 10, 2009

  • 73 Answers

SOURCE: 1994 Honda Civic Ex Heater doesn't work. Thermostat does

check your fuses

Posted on Aug 26, 2009

  • 1 Answer

SOURCE: honda civic how do you change the dome light that

how to a replace a dome light in a 2005 honda civic

Posted on Mar 15, 2010

  • 819 Answers

SOURCE: need to know how to line the timing marks on the

there is a timing mark on the timing cover that lines up with the mark on the crank pulley (i believe the mark is above the white dot on the crank) then on the 2 gears up top, there are lines that should line up horizontally with the top of the timing cover.

Posted on Mar 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Timing Belt or Timing chain?


All hondas have timing belts

Apr 10, 2014 | 2002 Honda Civic

2 Answers

How do I replace the oil drain plug on a 2007 Honda civic-ex 1.8,4 cylinder


You can order a new oil pan, get a generic oversized that cuts its own threads or use a tap to make new threads for a bigger plug

Jul 31, 2013 | 2007 Honda Civic 1.8

1 Answer

Does my 2007 honda civic have a timing belt or timing chain ?


Honda cars have always used timing belts, but it looks like your model has a chain.

Sep 19, 2012 | 2007 Honda Civic 1.8

1 Answer

How do u set timing on it? 1.8 engine


Installation
Install crankshaft sprocket on crankshaft.
Make sure mating marks on crankshaft sprocket face front of engine.

Position crankshaft so that No. 1 piston is at TDC and crankshaft key is at 12 o'clock.

Install slack side timing chain guide and timing chain tension guide.

Install timing chain on crankshaft sprocket.
Set timing chain by aligning its mating mark with that on the crankshaft sprocket.
Make sure sprocket's mating mark faces engine front.

Install camshaft sprockets.
Set timing chain by aligning mating marks with those of camshaft sprockets.

Install camshaft sprocket bolts to correct torque.
Apply new engine oil to bolt threads and seat surface.

Install chain tensioner.
Before installing chain tensioner, insert a suitable pin into pin hole of chain tensioner.
After installing chain tensioner, remove the pin.
Install timing chain guide.

Install O-rings to cylinder block.

Before installing front cover, remove all traces of RTV silicone sealant from mating surface using a scraper.
Also remove traces of RTV silicone sealant from mating surface of cylinder block.

Apply a continuous bead of Genuine RTV Silicone Sealant or equivalent to mating surface of front cover. Refer to RECOMMENDED CHEMICAL PRODUCTS AND SEALANTS .
Check alignment of mating marks on chain and crankshaft sprocket.
Align oil drive spacer with oil pump.
Place timing chain to the side of chain guide. This prevents the chain from making contact with water seal area of front cover.

Install front cover.

Make sure two O-rings are present.

Be careful not to damage oil seal when installing front cover.
Install cylinder head bolts at engine front side as shown in Fig. 55.
Tightening procedure:
Tighten bolts (1 - 4): 6.3-8.3 N.m (0.64-0.85 kg.m, 55.8-73.5 in.lb).

Install oil pump drive spacer.
Install water pump and water pump pulley. Refer to REMOVAL AND INSTALLATION .
Install idler pulley and bracket.

Install RH engine mounting bracket

Install RH engine mounting.
Install oil pan. Refer to INSTALLATION.
Install crankshaft pulley.
Remove ring gear stopper.
Install starter motor.
Install cylinder head front cover.
Apply RTV silicone sealant to cylinder head front cover.
Use Genuine RTV Silicone Sealant or equivalent. Refer to RECOMMENDED CHEMICAL PRODUCTS AND SEALANTS .

Install Camshaft Position Sensor (PHASE).

Before installing rocker cover, apply a bead of Genuine RTV Silicone Sealant or equivalent, to mating surface of cylinder head as shown in .

Install rocker cover gasket into rocker cover.
Install rocker cover and tighten in numerical order as shown in
Install spark plugs.
Install ignition coils.
Install front exhaust tube.
Install front/right-side splash undercover.
Install front RH wheel.
Install drive belts.
Adjusting drive belt deflection..

Nov 29, 2010 | 2002 Nissan Sentra

2 Answers

I'm receiving conflicting information about the 2004 Honda Civic Hybrid w/the 1.3 L engine. I need to know whether this particular model's engine has a timing belt or chain. No one, including a local Honda...


LOOK ON THE PASSENGER SIDE OF THE ENGINE AND SEE IF THERE IS A PLASTIC COVER AT THAT END OF THE ENGINE ..THIS IS THE ACCES POINT TO CHANGE THE TIMING BELT...

Jun 16, 2010 | 2004 Honda Civic

1 Answer

Getting code p1361 on my 99 civic. what is the problem and how do you fix it?


Code P1361 = Intermittent Interruption In TDC 1 Sensor Circuit

Turns out Top Dead Center (TDC) sensor was bad. Yours is too.

This sensor in located behind the timing chain cover on my 2001 civic. You have to take the cover off to get to it. Honda dealer wanted $360 in labor to change the sensor. Because it was in the same the location Honda would have changed my timing chain for no extra labor charge. So I went to the Honda dealer and got the sensor ($56) and went to the auto parts store and got a timing chain, water pump, and new belts. Local mechanic changed all these parts for $160 in labor (others wanted $230). $130 for the sensor and timing chain and $30 more for the pump. I probably could have hacked that timing chain cover off myself but that is what thought would happen. A hack job. And it was time for a new chain anyway. 92 plus degrees outside and the civic is running fine.

Good luck (remember rated this post).

Apr 12, 2010 | 1998 Honda Civic

2 Answers

Interior door panel removal 04 honda civic


This video will show you how to remove the door panel on a 01-05 Honda Civic. hope this helps you out.



Sep 19, 2009 | 2004 Honda Civic

2 Answers

Ive replaced dist cap and rotor coil is firing but no fire to plugs


check for power to the coil, if there is no power...its a possible ignition switch failure. The ignition switches in these models have defective internal contacts, resulting in power loss to vital electrical components. You may check the ignition switch by removing the plastic cover around the steering column. Its a white round plastic unit with wires coming out, and located behind the key cylinder. Inspect for internal archs or black/burnt residue. Call you local Honda dealer for recall info, they will need your vin#...Hopefully this helps

Jul 17, 2009 | 1999 Honda Civic

1 Answer

2004 honda civic ex


Hello, Your Honda Civic with a 1.7 L engine has a belt.
CYA, Gator241

Feb 09, 2009 | 2004 Honda Civic

2 Answers

1998 honda civic ex sedan


remove rear seat, remove round metal cover, disconnect fuel lines and wires from top of fuel pump, jack up rear of car. remove gas tank straps, lower gas tank with a jack, install is reverse.....if you need to just replace the fuel pump you don't have to remove tank you Can access from under rear seat good luck and please rate -jeff

Jun 11, 2008 | 1998 Honda Civic

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...