Question about Toyota Camry

Open Question

How to adjust timing belt for Toyota Camry 2.0 16 valve

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75822 Answers

SOURCE: need marks for timimg belt

On the crankshaft gear there is a VERY small dimple that aligns with a mark on the motor. The mark on the motor (a small triangle) is at roughly 11 o'clock. After you line these timing marks up look at the camshaft gear and you will see that on one of the spokes there is a hole. You need to use a mirror to line this hole up with the dimple on the cover that is behind the camshaft gear. (It is at roughly 1 o'clock) If this hole is 180 degrees from where it should be you need to rotate the motor 1 more revolution at the crankshaft and it should now be lined up, or close. Once lined up I like to take a silver (metallic) Sharpie and make my own mark on the camshaft gear and on the backing plate that is behind it. You can make this mark where ever it is convenient for you. As long as you know where your marks line up, that is all that matters. This way I don't have to use the mirror as often.

  • Step 5 Once you have your timing marks aligned you need to locate the tensioner. The tensioner obviously keeps the appropriate amount of tension on the timing belt.
  • Posted on May 26, 2009

    emissionwiz
    • 75822 Answers

    SOURCE: toyota camry 94 6 cyl broke timing belt,would be damage the valve

    THIS IS A "FREE WHEELING" ENGINE DESIGN, U DON'T HAVE BENT VALVES.

    Posted on Jul 06, 2009

    • 1861 Answers

    SOURCE: power steering belt on 1991 toyota camry

    Locate the idler pulley. Loosen the nut in the center of the idler pulley. Then loosen the bolt that protrudes from the back of the pulley. This will let the belt go slack.

    Posted on Jul 18, 2009

    co7196
    • 3433 Answers

    SOURCE: 1998 toyota camry le 4 cylinder How do you set the

    Just make sure the timing belt is on properlyy, lining up the cam and crank in proper position to each other. The engine willstart when fully assembled because the electrical has not be altered. If it has a crank position sensor , be sure to put it back on after cleaning it and the connector.

    Posted on Nov 14, 2009

    • 484 Answers

    SOURCE: how to change serpentine belt on 207 toyota camry

    4 cylinder diagram
    6 cylinder diagram
    Loosen the tensioner pulley to remove the belt. It is the one that has a long bolt running through it. Once you remove the old belt, install the new one using the appropriate diagram from the above two links. Readjust the tension using the bolt you loosened to remove the old belt.

    i hope this helps
    matthew

    Posted on Nov 20, 2009

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    3 Answers

    If the timing belt on a 94 toyota camry broke, would it bend the valves in the head 4cyclinder


    The pistons will hit the valves on a lot of cars, but you should ask your Toyota dealer service dept for sure.
    Hope this helps.

    Mar 19, 2015 | 1994 Toyota Camry

    1 Answer

    2001 toyota camry valve timing instruction


    With a loose tensioner...There are timing marks on the crank. Line it up, run your belt up and around cam pulley which will also have timing marks. If it is duel cam marks will line up with each other. Keep all the slack of the belt pulled to the side of the tensioner. Release the tensioner and confirm marks. Turn motor through a revolution by hand and reconfirm marks are lined back up. Put it all back together.

    Feb 27, 2015 | 2001 Toyota Camry

    2 Answers

    How do you set the crankshaft to the time shaft valve timing on a 3 litre Toyota V6 Camry?


    There are marks on the crank gear and the cam gears that line up to marks on the new timing belt. An old belt might not have the marks any more because of age. Therefore a new belt might be necessary to be sure of this.

    Feb 16, 2011 | 1995 Toyota Camry

    1 Answer

    I have 94,000 miles on my 2004 Toyota Camry Solara. Do I need a Timing belt at this time. What else is essential at this time? I am trying to save money.


    i would replace the belt. if the belt breaks you could bend the valves. i had mine break at about 102,000. bent 4 valves.

    Dec 09, 2010 | 2004 Toyota Camry Solara

    3 Answers

    95 toyota camry died and turns over but wont crank


    If your timing belt broke while driving, there WILL be engine damage. Valves will not be moving in response to your pistons continuing to move. I hope that it is not your timing belt. Check your ignition module, first, that's easier.

    Hope this helps!

    Dec 07, 2009 | 1995 Toyota Camry

    2 Answers

    What services does camry 2000 with 90000 km need


    90000 km service includes changing.spark plugs,oil and oil filter,gearbox fluid,brake fluid ,air filter and fuel filter if needed,a full safty inspection.and the most important timing belt,and while your doing the timing belt you should do the water pump.

    Oct 18, 2009 | 2003 Toyota Camry

    1 Answer

    Toyota camry 94 6 cyl broke timing belt,would be damage the valve


    THIS IS A "FREE WHEELING" ENGINE DESIGN, U DON'T HAVE BENT VALVES.

    Jul 06, 2009 | 1994 Toyota Camry

    2 Answers

    If the timing belt goes is the motor gone? on a 1995 camry


    Most times when the timing belt goes it results in bending a couple of the inlet valves because the pistons are coming up as the valves are going down.

    Worst case is that the valves punch holes in the piston crowns

    You should remove the rocker box covers and camshafts to check that all of the valve stems can be moved or more to the point all come back up to sit at the same level proving that they are travelling straight in the valve guides.

    If any of them fail to sit level they are not seating on the valve face and the engine will not run anyway, in that case you will need to take the head or heads off to do a manual inspection.

    Jun 03, 2009 | 1995 Toyota Camry

    1 Answer

    Replacing timing belt


    You have to remove the timing belt cover and slip off the old belt...The timing spec adjustment is: 10-15 degrees BTDC

    Sep 03, 2008 | 1994 Toyota Camry

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    16 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Toyota Experts

    yadayada
    yadayada

    Level 3 Expert

    75822 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8215 Answers

    Are you a Toyota Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...