Question about Cars & Trucks

Open Question

Tapprt clearance of maxx pick up - Cars & Trucks

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Holden captiva rear door handle broken with child lock on..?

If door is in jammed state, open door by
repeatedly pressing the unlock button, while jiggle the inner or outer door handle this will help free up the
internal gears in the actuator that are jammed.
once the door is open.
Replace the door lock actuator with a revised
Part No.: Description Qty:
96872800 LOCK,LHF DOOR (SX, CX, LX) 1
96872801 LOCK,RHF DOOR (SX, CX, LX) 1
96872811 LOCK,LHR DOOR (SX, CX, LX) 1
96872812 LOCK,RHR DOOR (SX, CX, LX) 1
96872803 LOCK,LHF DOOR (MAXX) 1
96872804 LOCK,RHF DOOR (MAXX) 1
96872813 LOCK,LHR DOOR (MAXX) 1
96872814 LOCK,RHR DOOR (MAXX) 1

Vehicle Torque Spec for door lock actuator
Captiva SX,CX, LX 10 Nm
Captiva MaXX 8 Nm

Apr 13, 2016 | Holden Cars & Trucks

1 Answer

Poor pick after engine head got repaired

hi Medovi

poor pick-up and less miles per gallon after engine head repaired is due to two things could be done wrong during repair,
1: wrong tappets clearance, witch is suppose to be 0.30 MM inlet, 0.40 MM exhaust
2. wrong timing setting ( timing belt setting )
better to get your mechanics to double check it
good luck

Jan 06, 2014 | 2008 Fiat Palio 1.2

1 Answer

Brakes lock up the longer you drive

Check the brake pedal rod to piston clearance. Should be about 1" before you touch the brake master cylinder piston. If it is ok then replace the brake master cylinder as the compensator ports in the cylinder are not clear. The heat generated from the brake action is building up in the brake fluid and as it cannot get back to the reservoir it is expanding the brakes pads/ shoes and putting on the brakes. The more it heats the more brake action which heats the oil more and so the cycle is repeated until the brakes lock on.

Oct 26, 2013 | 2006 Chevrolet Malibu Maxx

2 Answers

What are the valve clearance specs for a 1996 Toyota T100 v6?

you should get haynes auto repair manul for your particular car that way you will have the correct information about that. you can get the manul at autozone or any autopart, all you need is your car info, to pick the right manual for your car, good luck

Jul 15, 2011 | Toyota T100 Cars & Trucks

2 Answers

We're having a popping sound in the steering in my 2006 malibu maxx hatchback ? Is there a recall . Please help

i just bought a 2005 malibu maxx from a dealership. It was having a popping sound when i would turn the wheel back and forth. Had the dealership fix it. THEY said they replaced the ( rack and pinion ) for the steering on the car. Don't think there is a recall on that. GM had a lot of problems with that popping noise on their malibu maxx. Hope that might help.

Nov 09, 2010 | 2006 Chevrolet Malibu Maxx

2 Answers

Car decides when to start and when not too.

please have a look at your pick up or crank sensor so that the clearance is correct as the the clearance will be correct when cold and as the vehicle warm up clearance will alter. this is all an indication of a weak sensor . you can use deodrate spray and spray on the sensor and see if the vehicle will start.

Jul 21, 2009 | 1996 Ford Explorer

1 Answer

Tapprt noise 85 subaru

those have a non adjustable lash adjuster that can be very pesky to keep pumped up . I have had to replace oil pumps and even the lash adjusters themselves. I have got them pumped up before by simply installing a very watery graphite additive to the oil("lifter quiet" I believe the product was called) and running the motor under load to the tune of about 4000 rpm for 10 or more miles....good luck

Jun 12, 2009 | 1986 Subaru Gl 2 Door

1 Answer


The five-door Malibu Maxx rides on a wheelbase that is 6 inches longer ... inside mirror with compass. Rear reading lamps. Rear seat audio.

Nov 16, 2008 | 2007 Chevrolet Malibu Maxx LTZ Hatchback

1 Answer

I want to know the valve clearance adjustment.

intake .22 to .28 mm
exhaust .27 to .33 mm
rate me solved...this is all I can find

Jun 27, 2008 | 2004 Mazda 3

2 Answers

Mazda pick up B 2900 valves clearance

The manufacturer indicates that this vehicle has hydraulic lifters or adjusters and therefore does not require adjustment.
Midrange clearance is the most desirable:
Intake 0.22 - 0.28 mm (0.008 - 0.011 inch) Exhaust 0.27 - 0.33 mm (0.010 - 0.013 inch)


May 29, 2008 | 2004 Mazda B-Series

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

77939 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14405 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides