Question about Nissan Cars & Trucks

Open Question

Need all the torque specs on 2.7 nissan diesel no turbo. Please

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Torque spec for flywheel bolt: Isuzu 2.5 diesel engine

normally 110 nueton metres. use nut lock and once you have torqued you will feel if you have to tighten it a bit more.

Posted on Aug 15, 2008

  • 6982 Answers

SOURCE: Need torque specs for oil pan gasket

There likely is a spec for oil pan but unless you are a finatic, you really don't need to know what it is. Simple rule: Don't crank down ******* any fastener. If corners near crank ends have larger fasteners, you can tighten them a bit more than on siderails. Before tightening anything, install all bolts finger tight, to ensure that they are not cross threaded. To avoid warping pan, tighten from the center of the pan, working towards both ends, alternating from side to side as you go. When you are finished, go over it again, using the same amount of force on each bolt. As I said, end bolts can if larger in diameter, be tightened more but be careful not to tighten so much that you will either split or push the gasket out the sides.. Anywhere two gasket ends **** together, I recommend using a sensor -safe dab of silicone. An oil pan is not under any mechanical stress or pressure. I have used this method for many years and NEVER had one leak. If you really need #s, small fasteners get about 12-15in lbs, larger ones about 20.

Posted on Dec 31, 2008

  • 840 Answers

SOURCE: Engine torque settings VW lt 35 1993 2.4 turbo diesel. Code ACL

bob go to collsionrepairadvice.com and I will send the download to you its a big file

Posted on Mar 13, 2009

  • 122 Answers

SOURCE: need cylinder head gasket torque specs.

looks like there is special sequence to reassemble and tightening, a quick note replace any bolts that have two punch marks.tighten as follows: x x x x x 10 4 2 6 8 x x x x x 7 5 1 3 9 torque all down to 15 ft lbs torque to 30 ft lbs plus 90 degrees. Good luck!

Posted on Sep 18, 2009

ZJLimited
  • 17970 Answers

SOURCE: 2002 nissan maxima 3.5 cylinder head torque

Hi there:

2_17_2012_6_58_18_pm.jpg

Fig. Cylinder head bolt loosening sequence - Altima & Maxima 3.5L engine

Install the cylinder head bolts and torque in sequence as follows:

  1. Step 1: 72 ft. lbs. (98 Nm).
  2. Step 2: Completely loosen all bolts.
  3. Step 3: 26-32 ft. lbs. (34-44 Nm).
  4. Step 4: plus 90-95 degrees clockwise.
  5. Step 5: plus 90-95 degrees clockwise.

2_17_2012_6_59_54_pm.jpg

Fig. Right cylinder head bolt torque sequence- Altima & Maxima 3.5L engine


2_17_2012_7_00_21_pm.jpg

Fig. Left cylinder head bolt torque sequence- Altima & Maxima 3.5L engine

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day

Posted on Feb 17, 2012

Testimonial: "HI ZJ , Thank you so much for getting back to me sooooooooo fast.! I gave the specs to my husband whom is doing the work. Another question if I may ...was there any issues with this car model regarding the engine or anything to do with it burning oil around 75k miles? thanks Regina HAppy Friday!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

KB 250 diesel engine. What are the torque specs for mains, big end bearings, and the head?


welcome to usa forum.
no year, no country stated, (hopeless for sure)
we dont have KB's here, sorry!
so why not be the first and post country.?
as engine spec. vary by that.
Africa, not same as Australia. (etc)
no year, stated.
nor if engine is turbo or not.!
engine spec.s vary by lots of things, including compression ratio.
etc. and evolve in time.

Feb 02, 2016 | Isuzu Cars & Trucks

1 Answer

CYLINDER HEAD TORQUE SETTINGS PLEASE


go google and type in--- torque specifications for ( make not supplied) 1500 diesel engine --
there will be pages that you can download all the specs

Jan 16, 2016 | Cars & Trucks

1 Answer

What's your question?I am in need of the topbolts sequence and torque settings of a 2005 xlt intercooled turbo diesel. Can anyone please help me


go google and type in--- torque specifications for ( make ) 2005 turbo diesel head studs
there will be pages with the details and the sequence of tightening

Nov 01, 2015 | Cars & Trucks

1 Answer

Head torque sequence


Start in the middle and work your way outwards alternatly ,alloy head around 65lbs ,cast heads slightly more say 70lbs unless its a turbo diesel with cast heads but dont confuse the issue,its american so it must be a gas burner

Jul 25, 2014 | Dodge Caravan Cars & Trucks

1 Answer

Nissan frontier 2005 2.5 liter eng. head torque specs.


Is there a diagram for head bolt sequence nissan frontier 2005 2.5 yd25 turbo diesel?

Jun 10, 2013 | Cars & Trucks

1 Answer

Head torque specs for 93 Nissan atlas FD42


alloy head petrol engine then 65-70 lbs if a cast head then 80 or so ,if a turbo diesel then 110lbs

Apr 28, 2013 | 1988 Suzuki Samurai

1 Answer

Torque specs of head bolts for 1994 mighty max pick up


2.0L Gas Engine : 65 to 72 ft lbs 2.4L Gas Engine : 65 to 72 ft lbs
2.6L Gas Engine : 65 to 72 ft lbs 3.0L V6 Gas Engine : 76 to 83 ft lbs 2.3L Turbo Diesel Engine : 76 to 83 ft lbs 2.5L Turbo Diesel Engine : 76 to 83 ft lbs

Aug 23, 2011 | 1991 Mitsubishi Montero

1 Answer

I am asking for headcylinder torques for Nissan Primera model S TD, 1974cc. Its a 2000 model diesel engine


go to torque specs .com there are many similar sites like this that list all torque specs for all cars

Feb 04, 2011 | Nissan Sentra Cars & Trucks

2 Answers

Head Bolt torque settings for a 3.1 bighorn turbo Deisel


What is the torque for the crank pulley for 3.1turbo

Dec 21, 2010 | 1996 Isuzu Trooper

1 Answer

Torque settings for lt2.4 turbo diesel , replacing the head.


Your torque specs are 58 ft/lb don't forget to use the correct torque sequence

Aug 11, 2009 | 1989 Toyota 4Runner

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...