Question about Dodge Cars & Trucks

1 Answer

Firing order & Wire Routing for 2009 Dodge Nitro 3.7 w/ three coil setup

I need to know the spark plug wire routing for an 09 Dodge Nitro 3.7 v6 with the three coil setup. Coils are on the drivers side, wires run from there to the passenger side. Need to know which coil fires what passenger side cylinder.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 3,230 Answers

The firing order for v6 is 165432
The driver side cylinder bank is numbered from front to rear-- 2-4-6
The passenger side cylinder bank is numbered from front to rear 1-3-5
The picture is for your coil pack, hopefully. So you can see how the coil towers are numbered.
My database for 09 showed coil on plug ignition. Is this the original engine?
I did see info for 07--3.7L that did appear to show a coil pack in tune-up manual.

Firing order & Wire Routing for 2009 Dodge Nitro 3 - coil pack-44ygowsvu5lf44rkpv3xxwg3-3-0.jpg

Posted on Apr 20, 2017

  • Richard Herrmann
    Richard Herrmann Apr 20, 2017

    That's not the setup I have. This video shows the same setuphttps://www.youtube.com/watch?v=EijzJpoe...

  • jack layton
    jack layton Apr 20, 2017

    Does one coil fire two spark plugs? The bottom part of coil sits on spark plug and toward the top another spark plug wire attaches?If so, 1--4 should fire together
    5--2 should fire together
    6--3 should fire together
    I've never seen that before, sorry if my info was wrong.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It need a spark plug wire diagram for a 97 Monte Carlo 3.1


Uh, the actual firing order is 1 2 3 4 5 6. There should be a sticker under hood that shows proper wire routing to the 3 coilsI need help with the 97 3.1 v6 monte carlo ls firing order?
The firing order goes 1-6-4-3-5-2 im pretty sure im not too familiar with v 6's

Sep 17, 2015 | Cars & Trucks

1 Answer

What is the Wire Order with distributor?


theres no distributor and the firing order for your 3.8 is 1-6-5-4-3-2-the following link shows the coil pack
Buick General Motor 3800 V6 Engine Firing Order DIS IDI ignition timing 3.8 Buick Engine Coil Pack Firing Order Spark Plug Wire Location Which way do the spark plug wires go on & what cylinder is what?
.
For the Buick V6 231 3.8 liter turbocharged engine:
.
Answers!
.
Firing order:
1 - 6 - 5 - 4 - 3 - 2.
.
Spark plug wire location on coil pack:
.
Closest to the back of the car, left to right: 1 - 5 - 3.
Closest to the front of the car, left to right: 4 - 2 - 6.
.
Spark plug wire location on engine:
.
drivers side, front to back of car: 1 - 3 - 5.
passenger side, front to back of car: 2 - 4 - 6.
.----and this link shows the coil pack to cylinders
.
3 8 Buick Turbo Engine Coil Pack Firing Order Spark Plug Wire Location

Aug 15, 2015 | 1987 Buick Regal

1 Answer

Geting no spark to cylenders 5 & 6


Hi there:
  • Check the spark plug wires and the coil wire, ensure that the spark plug wires are securely attached to the spark plugs and the distributor cap.

  • Check the wire routing in order to ensure that cross-firing is not occurring. If the misfire occurs when the weather is damp, the problem could be due to worn plug wires.


Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Aug 23, 2012 | 1992 Oldsmobile Cutlass Ciera

1 Answer

1991 v6 3.0L ford Ranger need diagram for distributor to spark plugs wires


Below is the best diagram i could find, just match the color up for correct plug wire routing. Firing order is 1-4-2-5-3-6


emissionwiz_53.gif

Mar 12, 2011 | 1991 Ford Ranger Supercab

4 Answers

We bought duralast spark plug wires and they are not numbered and not sure where they go HELP


Remove one spark plug wire check length against new wires and replace . do this one plug wire at a time untill they are all done

Aug 13, 2010 | 1999 Chevrolet Blazer

1 Answer

Got wires crossed while changing spark plug wires on 1996 saturn SC1. How do determine correct wire placement?


According to Saturn timing specifications, the internal firing order for the Saturn 1.9L motor, both Single overhead cam, or Twin cam is as follows:
Left to right 1-3-4-2

If you are routing spark plug wires, and need to know the order of wires from the coils to the engine, the order is as follows:
Left to right 4-1-2-3

Jul 10, 2010 | Saturn SC1 Cars & Trucks

1 Answer

1996 dodge stratus firing order spark plugs


For the 1996 Dodge Stratus:
I do not know if you have the 2.0L SOHC In-Line 4-Cylinder, or the 2.4L DOHC In-Line 4-Cylinder or the 2.5L SOHC V6; however I have included all three below...

For the 2.0L SOHC AND 2.4L DOHC In-Line 4-Cylinder:
Firing Order:
1-3-4-2
Cylinders:
..........(back).........
|...1....2....3....4...|
.........(front)
Ignition Coil:
.....................o <---4
1---> o
.....................O <---Connector
2---> o
.....................o <---3

For the 2.5L SOHC V6:
Firing Order:
1-2-3-4-5-6
Cylinders:
.......(back).......

|...1....3....5...|
.......................
|...2....4....6...|
.......(front)
Distributor:
.......(back)
....(+)....5
..4...........3
2
....6.........1
...........(+)-screw

Let me know if this helped......

May 17, 2010 | 1996 Dodge Stratus

1 Answer

Have 1988 pontiac grand prix se with 2.8 v6


My sincere apologies for the delayed response.
I am personally going back to answer your unanswered question.


For the 2.8L
Firing Order:
1-2-3-4-5-6

Cylinders:
......(back)
1.......3.......5
2.......4.......6
......(front)

Ignition Connections (Spark Coils):
........(back)
.|.1..4.|.|.6..3.|.|.2..5.|
........(front)

Again my apologies....
Let me know if this helped...

Jan 22, 2010 | 1988 Pontiac Grand Prix

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...