Question about Cars & Trucks

Open Question

How do I fix a p1355 code on my 2008 xl1200N, I've already switCh in a new coil pack, my back cylinder isn't getting any spark and I put an inline tester on it to no avail

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

hi99ins
  • 123 Answers

SOURCE: i cant get spark out of the coil pack

cam sensor fires the injectors to synchronise injector pulsing with the spark at the spark plugs.. U need to probably change the crankshaft sensor (around the crank pulley) as the crank sensor is what controls the ignition spark.
hope that does it.
:)

Posted on Jan 20, 2009

honeymokey
  • 3113 Answers

SOURCE: No spark from new coil pack

Crank sensor!

Posted on May 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I had a missfire code saying cylinder 2 n it was missing but drivable.. Now its not its shaking horribly n i put a new new coil pack on n plug n wires n still rough low idle n coil pack is super hot to...


Try switching the new coil pack to a different cylinder and check if the miss follows the new coil pack or stays at #2. Just because the coil pack is new don't mean it cant be bad also. You did say it was getting real hot.

Mar 10, 2015 | Cars & Trucks

2 Answers

2008 Cadillac CTS returning P0303 after replacing spark plug and coil pack


Error Code: P0303
Description:
Cylinder 3 - Misfire Detected
Possible Cause:
Wiring harness, igniter and fuel injector connectors.
Ignition system. (Spark plugs gaps)
Fuel injector No. 3.
Fuel pressure.
Running out of fuel.
EVAP canister purge valve.
Evaporative emission system.
Low compression, cylinder No.3. (check valve clearance and throttle plate for excessive wear)
Engine control module (ECM).

Feb 27, 2014 | 2008 Cadillac Cts

1 Answer

Replace coil pack on subaru legacy


Here's a link on how to replace your coil pack.

Mar 15, 2013 | 1996 Subaru Legacy

1 Answer

I got a 2001 Oldsmobile aurora that the code reads PO301


well that code means ur have a missfire in cylinder one change the wires for the spark plugs that really the only thing i can think off beacuse you have already done the spark plugs and the oxygen sensors and the coil packs

Feb 26, 2013 | 2001 Oldsmobile Aurora

1 Answer

Engine Light problems , I have replace Fuel injector, new Coil pack new pig tail lead for #i1 Coil Pack , Check Vacuum, and Compression Cylinder, Now if the Idle fall to 535 RPMs Engine light will...


You've done all the right things, so piston rings or leaky valve is out of the mix now. Now back to the simple stuff. Change your spark plugs to A/C Delco 41-103 if you haven't already. Don't try and gap them, the iridium will come off and possilbe cause a misfire. Try switching coil packs with another cylinder, possible the new coil is faulty, or the wiring isn't quite perfect. Finally.....That #1 cylinder is a PITA to get seated correctly because of the harness right there. Chances are, it's just not seated correctly. Keep at it, you'll nail it down to one of these.

Feb 03, 2011 | 2006 Chevrolet Trailblazer

2 Answers

2000 cadillac sls v8 northstar cylinder 7 isnt firing and already put new sparkplugs in and still isnt firing.whats next


iginition coil needs to be replaced. By for about 150 to 200, and take the Northstar cover off and replace. Very easy fix. Car will then run like a jet engine.

Sep 07, 2010 | Cadillac Seville Cars & Trucks

1 Answer

Where are the sparkplugs on a 2003 gmc envoy


You have a 4.2L inline 6 cylinder, on top of engine you'll see six coil pack's running front to back on top of the motor, disconnect harness on each one remove small bolt's pull all six coil pack's out, spark plug's will be in there.Don't worry you don't have to put the coil pack's back in the same hole.

Dec 12, 2009 | 2003 GMC Envoy

1 Answer

Missing in every gear..


you have to see if the coil pack fire up do you have spark coming out of the coil pack cylinder 2 never mind the other code the missing cylinder make the other sensor malfonction check if you have spark coming out of the coil pack if not change the coil pack if you have you spark check the compression let me know pierre please dont rate right away we work together to fix our problem because i whant you to get our car running good and i whant a fixya anything else is bad for me thanks pierre

Feb 25, 2009 | 2002 Mitsubishi Lancer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...