SOURCE: Nissan Frontier torsion bar replacement
well it depends how you want to adjust it, if you want to lower it, back out the screw on the torsion key a couple of turns. raise, screw it in a couple of turns
SOURCE: pcv valve
pcv valve is build into the valve cover. need to replace valve cover assembly to replace pcv valve.
SOURCE: nissan pickup 1994
the pcv valve is behind the alternator between the alternator and oil filter. when you remove the oil filter you can see the pcv in the intake manifold. best way to get to it is through the pass side fender under the rubber mud flap thats between the wheel and engine.
SOURCE: where is pcv valve on 96 nissan pickup
The PCV valve on the KA24E 4-cylinder is located in front of the oil filter and above the alternator. It points to the rear of the engine.
You will need only two tools; a stubby 19mm open end wrench and a pair of pliers to remove the hose clamp. I did it without removing anything else. Just reach around to the right of the oil filter. It took about 15 minutes. Here is a pic:
http://www.angelfire.com/extreme/hawaiianhardbody/images/engine/PCVvalve.jpg
SOURCE: where is the pcv valve on 2004 nissan frontier 2.4
Behind the alternator, under the intake,to the right of the oil filter.
34 views
Usually answered in minutes!
×