Question about Nissan Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If your car and headlights are off then you will not get a shock. You have to unplug the bulb to replace it anyway so there is no way for you to get shocked.
Posted on Dec 03, 2008
on each headlamp assembly, there will be either one or two plastic nuts that you can turn.
If you only have one nut on each, that will adjust the vertical aim of the headlights.
If you have two nuts on each, one will adjust the vertical and the other will adjust the horizontal.
Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)
If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.
Posted on Sep 14, 2009
Open up the hood, and go in behind the fixture where the light is located. Sometimes there is an access panel on top. Open it and reach down inside and grab the bulb’s socket. Twist the socket a quarter turn counter clockwise, and pull out the socket. Grab the bulb, and pull it straight out. To replace the new bulb, never touch it with your bare fingers, as this will greatly shorten the bulb's life, if it even work's at all. Use a tissue or something else in that order to handle the new bulb. Push the new bulb into the socket, put the socket back into the housing, and twist a quarter turn clockwise to secure the socket into the fix.Seems that you have to remove the coolant bottle(two screws), and also the unscrew the washer fluid bottle, after that you can reach the socket that holds the bulb. There is a wire that holds the bulb in. if you loosen the screw you can tip up the wire and be careful to leave it in place...also the long side of the wire seems to connect to ground wire for the light...
Posted on Oct 14, 2009
Tips for a great answer:
Apr 19, 2017 | Nissan Cars & Trucks
Sep 16, 2015 | 2005 Nissan Altima 2.5
Aug 30, 2010 | 2002 Nissan Altima
Jan 26, 2010 | 2003 Nissan Altima
Nov 19, 2009 | 2002 Nissan Pathfinder
Sep 27, 2009 | 2002 Nissan Xterra
Jul 19, 2009 | 2002 Nissan Quest
Mar 02, 2009 | 2002 Nissan Frontier Crew Cab
Jan 04, 2009 | 2003 Nissan Altima
12 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: