Have reactivated my grundig aura 6 disc stereo with correct code. Now can hear cd player going through check sequence but won't play cds. No cd information on radio display
You have power to the CD player, since it's cycling CDs. Your Base unit is working, since it's not seeing the CD Information. The most likely culprit is that the cable in between is either damaged or not-seated properly at one end. I don't know the specifics on your system, but Grundig Aura listings on eBay show a separate changer unit, with a specialty cable in between (same setup I had on my old Saab). The cable even looks identical, no doubt some audio industry plug standard. Anyhow, go re-seat the cable on both ends - you will likely need some DIN wires to pull the dash unit, or access in from under the dashboard, depending on your car. If that fails, you may have to consider replacing the cable. There are likely pin-outs for the cable, so you can test continuity on the pins with a volt meter if you want to be sure on the cable before the likely PITA task of routing the cable through a bunch of crevices in the car body.
Nov 07, 2015 |
Cars & Trucks